OER Authorized sliding rear window to fit 1988-99 Chevrolet/GMC C/K pickup models. Features a three panel design, self-locking latch, and a slim line frame to enhance visibility. Aluminum frames feature a powder coated...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
Reproduction of the original outer door mirror designed for use with various 1968-72 GM models. Each mirror is precision-manufactured in high-quality die-cast zinc, replicating the original design, fit, and finish for an...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....
1988-98 Chevrolet, GMC Truck; Front Bumper; With Driving & Fog Lamps; With Dual Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models
Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1988-98 Chevrolet, GMC Truck; Front Bumper; With Driving & Fog Lamps; With Single Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1988-98 Chevrolet, GMC Truck; Front Bumper; with Dual Insert & Fog Lights; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1988-98 Chevrolet, GMC Truck; Front Bumper; with Driving; with Fog Lamps; without Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1988-98 Chevrolet, GMC Truck; Front Bumper; without Lights; with Single Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1988-98 Chevrolet, GMC Truck; Front Bumper; with Driving & Fog Lamps; with Single Insert; Paintable
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1970-81 Camaro, Firebird, 67, 69 Impala, Caprice, Hood Hinge Spring; Each; Various Models
Reproduction of the original hood hinge spring designed for use on various GM vehicles. Each spring is manufactured to replicate the original in quality and design. Will fit and install as original and features OE tension...
1993-2002 Chevrolet Camaro; High Rise Rear Spoiler; Urethane
Superb factory style reproduction of the original rear spoiler designed for use with 1993-2002 Camaro models. Each rear spoiler is manufactured using quality, automotive-grade fiberglass material offering an authentic...
1969-87 Chevrolet, Pontiac; Door Hinge Repair Set; Except with 15mm OD Bushings
Reproduction of the original door hinge components for use on various GM models. Repair the broken door hinges with this comprehensive repair set. Each repair kit includes 4 properly hardened shoulder pivot pins and 8...
1961 Impala, Bel Air, Biscayne; Front Bumper Set; 3 Piece; Chrome
Reproduction of the original 3 piece front bumper designed for 1961 Chevrolet Impala, Biscayne, and Bel Air models. This reproduction bumper set is manufactured to factory specifications and features a beautifully polished...
1988-98 Chevrolet, GMC Truck; Front Bumper; With Driving; With Fog Lamps; Without Insert; Painted
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1988-98 Chevrolet, GMC Truck; Front Bumper; With Fog Lamps & License Holes; Paintable
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
1988-98 Chevrolet, GMC Truck; Front Bumper; Without Lights; With Single Insert; Painted
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is edp coated and paintable. Features all original style contours, factory...
1988-98 Chevrolet, GMC Truck; Front Bumper; Standard With Fog Lights & Without Inserts; Paintable
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1970-81 Camaro, Firebird, Impala; Upper Front Door Hinge; RH Passenger Side; Various Models
This OER® reproduction door hinge restores proper door operation on 1970-81 models. The factory doors were extremely heavy and often caused the original hinges to wear or sag over time. Replacing them with this...
1959-60 Chevrolet, GM Station Wagon; Back Glass; Clear
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
Reproduction rear step bumper for 1988-00 Chevrolet/GMC C/K GMT400 series fleetside pickup. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when using the bumper as a...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
Reproduction rear step bumper for 1988-00 Chevrolet/GMC C/K GMT400 series stepside pickup. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when using the bumper as a...
1959-60 GM Full-Size Windshield; Various Makes/Models; With Gray Shade
Replacing your original damaged or missing windshield glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the...
Reproduction body mounting set for 1988-98 Chevrolet/GMC extended cab pickup. Each 34-piece kit includes rubber radiator core support bushings, rubber cab mounting bushings, and associated hardware. Note: Bed mounting bolt...
Reproduction of the original front windshield glass for use with 1961-62 Buick, Chevrolet, Pontiac, and Oldsmobile Full Size 2 & 4 door, sedan, hardtop, and station wagon models as listed. This windshield is manufactured with...
1961-62, 1965-68 Impala, Bel Air, Biscayne, Caprice; Front Outer Door Handle Set; 2 or 4 Door
Quality reproduction outer door handle set for 1961-62 and 1965-68 Impala and Full Size models. Each door handle set is manufactured in zinc die-cast zinc and includes a high quality triple chrome plating offering a factory...
1995-2000 Escalade, Suburban, Tahoe, Yukon; Rear Window Glass; 3-Hole; Heated; Dk Privacy Tint
Reproduction of the original rear window glass designed for use with 1999-2000 Cadillac Escalade, and 1995-99 Suburban, and 1995-2000 Tahoe and Yukon models with rear wiper, and heated rear glass. Fits 1995-96 models from...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
Reproduction of the original encapsulated pop-out rear quarter (third door) window glass for 1988-2000 extended cab Chevrolet and GMC pickup truck models. Replace scratched, broken or missing original 3-hole movable quarter...
Reproduction front and rear cab mount bushing set for 1988-98 Chevrolet and GMC extended cab C/K GMT400 series pickup models. Each bushing is manufactured to correct factory specifications offering an authentic reproduction...
1988-98 Chevrolet, GMC C/K GMT400 Series Truck, Blazer, Jimmy, Suburban; Front Bumper; Chrome
Reproduction chrome front bumper for 1988-98 Chevrolet and GMC 2 door or extended cab models. Manufactured to exact factory specifications, this reproduction chrome bumper is designed to replace the original in every detail....
Reproduction rear step bumper face bar for 1988-00 Chevrolet/GMC C/K GMT400 series fleetside pickup, 1992-94 Blazer, 1995-00 Tahoe, 1992-99 Suburban, and 1992-00 Yukon SUV models. Each step bumper face bar is manufactured in...
1947-79 Chevy, GMC Car & Truck; Chrome Drop Mount Peep Mirror; 4"; LH or RH; Each; Various Models;
OER® Authorized reproduction drop head mirror for 1941-79 GM model cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 4" mirror head. Fits sedan and truck closed...
1993-02 Chevy, GMC GMT400 C/K Pickup; Back Window Glass; Non-Heated; Dk Gray Privacy Tint
OER reproduction of the original back window glass for use on all 1993-2002 Chevrolet and GMC C/K GMT400 Series pickup truck models without heated glass. Manufactured with the proper shape, curvature, and pattern in OEM...
1969-70 Full-Size Chevrolet 4 Door Sedan & Station Wagon Tinted Windshield Glass With Antenna
Replacing your original damaged or missing windshield glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the...
1959-60 Impala, Bel Air, Biscayne; Outer Door Mirror; Chrome; with Gasket & Installation Hardware
Correct reproduction outer door mirror for 1959-1960 Chevrolet Impala, Bel Air, Biscayne, El Camino, and related full-size passenger models. Manufactured in quality die-cast zinc and chrome plated to replicate the original in...
1993-97 Camaro; Urethane Front Bumper Cover
Reproduction front bumper cover for 1993-97 Camaro models. Each bumper cover is manufactured in quality urethane materials to factory specifications replicating the original in materials and fitment. Does not feature...
1997-04 Chevrolet Corvette; Coupe; Tail Light Panel Carpet Covers; 3-Piece Set; Truvette; Black
Manufactured to replicate the original Corvette carpet introduced in the early 1990s. This premium, 100% nylon carpet is Tufted to a 5/64 gauge, Truvette contains 14 ounces of yarn per square yard. Each set is molded to fit...
1997-04 Chevrolet Corvette; Coupe; Tail Light Panel Carpet Covers; 3-Piece Set; Truvette; Torch Red
Manufactured to replicate the original Corvette carpet introduced in the early 1990s. This premium, 100% nylon carpet is Tufted to a 5/64 gauge, Truvette contains 14 ounces of yarn per square yard. Each set is molded to fit...
1955-64 Chevrolet, GM; Window Regulator Roller And Rivet; for 5/16" Hole
Reproduction of the original window regulator roller unit for various 1955-64 Chevrolet models with 5/16" rivet. Three required per door. Also used on rear quarter window on 1961-64 Impala, Bel Air, and Biscayne models. Sold...
1993-02 Chevy, GMC 1500, 2500, 3500 Pickup; Back Window Glass; Heated; Light Green Tint; OER
Replace scratched, damaged or missing original glass with our OEM quality reproduction glass. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace scratched, damaged or missing...
Reproduction front and rear cab mount bushing set for 1988-98 Chevrolet and GMC standard cab C/K GMT400 series pickup truck models. Each bushing is manufactured to correct factory specifications offering an authentic...
1955-60 Bel Air, El Camino, Impala, Corvette; Door Latch Striker Plates; Pair
Reproduction of the original door striker plates designed for use with 1955-60 Chevrolet Bel Air, 150, 210, Nomad, Impala, Biscayne, Corvette, and El Camino models. Each striker plate is manufactured from high quality zinc...
Reproduction rear quarter glass window for 1992-99 Chevrolet and GMC Suburban models. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have while enhancing the vehicle's...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
Reproduction of the original upper door hinge designed for use on 1961-64 Impala, Bel Air, Biscayne, and other GM B-Body models. Worn or sagging door hinges can cause misalignment and potential damage to the door, lock...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1961-65 GM Full Size; Vent Window Regulator; Passenger Side; GM B Body Models
Reproduction of the original vent window requlator designed for use on various 1961-65 GM Buick, Chevrolet, Oldsmobile, and Pontiac full size models. Each regulator is designed and manufactured to replicate the original in...