Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1990-98 Ford F-150, F-250, F-350; Fuel Tank; Rear, Aft Mount; Zinc Coating; 18.2 Gallons
Reproduction rear / aft mount gas tank for 1990-96 Ford F-150, and 1990-97 F-250, 1990-98 F-350 and F Super Duty Pickup Trucks. This direct replacement steel tank installs in the stock location using the original hardware....
1990-98 Ford F-150, F-250, F-350; Fuel Tank; Side Mount; Zinc Coating; 16 Gallons
Reproduction side mount gas tank for 1990-96 Ford F-150, and 1990-97 F-250, 1990-98 F-350 Pickup Trucks. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 42-3/8 in....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1966-96 Ford, Mercury; Lower Fuel Tank Filler Pipe Seal; Various Models
Reproduction of the original fuel tank to filler pipe seal designed for use on various1966-97 Ford and Mercury applications. Each seal is manufactured to correct factory specifications and replaces the old or missing original...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
Reproduction rear mount upper gas tank straps for 1980-96 Ford F100, F150, F250, F350 trucks. Each strap is manufactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for rust and corrosion...
1980-96 Ford F-Series Truck; Styleside; Fuel Filler Hose; Rear Tank
Reproduction rear tank fuel filler and vent hose set for 1980-96 Ford F-Series trucks. Manufactured from high quality black rubber. Will fit long or short bed StyleSide beds. Replaces Ford part# E0TZ-9047-D. {fitment}
Reproduction of the original style side mount gas tank straps designed for use with 1980-1996 Ford F100, F150, F250, F350 trucks with 16 gallon tank. Each strap is manufafactured in stamped steel to correct factory...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1990-96 Ford F-150, 1990-97 F-250, F-350; Fuel Tank; Side Mount; Zinc Coating; 19 Gallons
Reproduction side mount gas tank for 1990-96 Ford F-150, and 1990-97 F-250, F-350 and F Super Duty Pickup Trucks. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1990-97 F-150, F-250, F-350, Super Duty, Bronco; Fuel Tank Vapor Vent Valve; 4.9L, 5.0L, 5.8L, 5.7L
New reproduction 2-port design fuel tank vapor valve for various 1990-97 Ford truck models. This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Reproduction fuel tank filler neck for midship internally vented tanks on 1987-96 and 1997 Old Body Style Ford F150, F250, F350 pickup truck models. Each filler neck is manufactured in quality stamped steel featuring zinc...
1987-97 Ford F150, F250, F350 Pickup Truck; Fuel Tank Filler Neck Pipe; For After-Axle Tank
Reproduction fuel tank filler neck for after axle tanks on 1987-96 and 1997 Old Body Style Ford F150, F250, F350 pickup truck models. Each filler neck is manufactured in quality stamped steel featuring zinc plating with black...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Reproduction fuel tank filler neck for midship externally vented tanks on 1996-98 Ford F150, F250, F350 pickup truck models. Each filler neck is manufactured in quality stamped steel featuring zinc plating with black EDP...
1960-97 Ford, Mercury; Fuel Tank Sending Unit Retaining Lock Ring; Three Tab Style
Reproduction fuel sending unit retaining lock ring for various 1960-97 Ford & Mercury models. Each ring is manufactured in quality stamped steel for an original fit. Twists into place in the fuel tank to secure the sending...
Reproduction of the original style side mount gas tank straps designed for use with 1980-1996 Ford F100, F150, F250, F350 trucks with 16 gallon tank. Each strap is manufafactured in stamped steel to correct factory...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
1979-1997 Ford F-Series Truck, Bronco; Fuel Tank Vapor Valve Seal
Reproduction fuel tank vapor valve seal for Ford F-Series trucks and Ford Bronco. This rubber gas tank vapor valve seal is a genuine FoMoCo service replacement part. It is for 1979-97 Ford pickup and Bronco models. {fitment}
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}