Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1994-04 Ford Mustang; Glass Rear Window; For Convertible Top; Stayfast Canvas; With Defrost; Black
Reproduction glass rear window (without zipper) for Mustang convertible with defrost, features high grade materials and construction throughout including trim in our Stayfast Canvas material to match our convertible top...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1994-04 Ford Mustang; Convertible Top; Sailcloth Vinyl; Black
This quality replacement convertible top offers superior fit and durability for the best possible value. Our top features "Sailcloth Grain" single texture vinyl fabric, which has the correct appearance and texture for...
Reproduction front bumper without impact strip holes for 1992-96 Ford F-Series Truck and Bronco. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes for the factory mounting...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1992-98 Ford F-Series Pickup, Bronco; Front Bumper Stone Deflector; Upper; Heavy Gauge; Chrome
Reproduction upper front stone deflector for 1992-98 Ford Pickup, and 1992-96 Bronco models. Stone deflectors are manufactured in heavy gauge stamped steel to factory specifications replicating the original in quality and...
1992-96 Ford F-Series F-150 / F-250 / F-350 Truck, Bronco Front Bumper, With Pad Holes; Paintable
Reproduction front bumper with impact strip holes for 1992-96 Ford F-Series Truck and Bronco. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes for the factory mounting brackets...
1992-96 Ford F-Series F-150 / F-250 / F-350 Truck, Bronco Front Bumper; Without Pad Holes; Paintable
Reproduction front bumper without impact strip holes for 1992-96 Ford F-Series Truck and Bronco. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes for the factory mounting...
1987-96 Ford F-100, F-250, F-350 Styleside Truck; Rear Tailgate
Reproduction of the original tailgate designed for use with 1987-96 Ford F150, F250, F350 pickup truck models. The main assembly is manufactured in quality automotive-grade stamped steel replicating the original factory...
1980-96 Ford Bronco; Rear Window Glass; Non-Heated; Clear; OER
OER reproduction of the original back window glass designed for use with Ford Bronco models. Each glass is manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace scratched, damaged or...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1980-96 Ford F-Series Pickup, F-100, F-150, F-250, F-350; Rear Window Glass; 1/8" Tempered; Clear
Reproduction stationary flat back window glass for 1980-96 Ford F-Series truck including f-100, F-150, F-250, F-350 models. Each glass is manufactured with the proper shape, curvature, and pattern in factory equivalent 1/8'...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1994-2000 Ford Mustang; Door Window Glass; Tinted; LH; Driver Side; Built On or Before 9/20/99
OER reproduction door window glass for 1994-2000 Mustang coupe or convertible models. (built on or before 9/20/99). Replacing the original damaged or missing door window glass will enhance your vehicle's appearance. Each door...
1994-2000 Ford Mustang; Door Window Glass; Tinted; RH; Passenger Side; Built On or Before 9/20/99
OER reproduction of the original door window glass for use with 1994-2000 Mustang coupe or convertible models. (built on or before 9/20/99). Replacing the original damaged or missing door window glass will enhance your...
1994-2004 Mustang; Convertible Top Hose Set; with Power Top; Upper And Lower; Made in the USA
Reproduction of the original hydraulic hose set designed for use with 1994-2004 Mustang convertible models as listed. Finding an original hose for your early convertible is next to impossible. If you own a convertible model...
1994-2004 Mustang; Power Window Regulator; With Motor; RH, Passenger Side
Reproduction window regulator with motor for 1994-2004 Mustang models with power windows. Each regulator assembly is manufactured to factory specifications. Will replace the old or damaged original regulator and comes...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
OER reproduction of the original rear quarter window glass for use with 1994-2000 Ford Mustang Convertible models with manufacturers date up to September, 20th, 1999. Replacing your original glass will eliminate any...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
Replacement side door mirror for 1992-96 Ford F-150, F-250, F-350 and Bronco. This fully assembled mirror features all of the correct features and functions of the originals. Specifications Right Hand/Passenger Side...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1987-96 Ford F150, F250, F350, Bronco; Door Window Glass; Clear; LH Driver Side
Reproduction of the original door glass for 1987-96 Ford F-Series pickup trucks and Bronco models. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original...
1987-96 Ford F150, F250, F350, Bronco; Door Window Glass; Clear; RH Passenger Side
Reproduction of the original door glass for 1987-96 Ford F-Series pickup trucks and Bronco models. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original...
1980-96 F-100, F-150, F-250, F350 Truck, Bronco; Outer Rocker Panel; LH Driver Side
Reproduction driver side outer rocker panel for 1980-96 Ford F-Series regular cab trucks including F150, F250, and F350 models. Also fits 1980-83 F100 and 1980-96 Bronco. This patch panel is manufactured from 19 gauge sheet...
1980-97 F-100, F-150, F-250, F350 Truck, Bronco; Outer Rocker Panel; RH Passenger Side
Reproduction passenger side outer rocker panel for 1980-96 Ford F-Series regular cab trucks including F150, F250, and F350 models. Also fits 1980-83 F100 and 1980-96 Bronco. This patch panel is manufactured from heavy gauge...
1994 To Feb 1995 Mustang Convertible Top Tension Cables - 35-1/8" Length
Reproduction convertible top side cables for 1994-early 1995 Mustang models equipped with a convertible top. The best time to replace these tension cables is when getting a new top put on your Mustang. These cables are...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1987-96 Ford F150, F250, F350, Bronco; Door Window Glass; Tinted; RH Passenger Side
Reproduction of the original door glass for 1987-96 Ford F-Series pickup trucks and Bronco models. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original...
1994-98 Mustang; Front Bumper Reinforcement; EDP Coated
Reproduction of the original front bumper reinforcement designed for use with 1994-98 Mustang models. Manufactured to factory specifications for proper fitment and function. Come EDP coated for rust prevention. Note: Shipped...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
1980-96 Ford F-150, F-250, F-350, Bronco; Upper Door Hinge; LH; Driver Side
Reproduction upper door hinge for 1980-96 F100, F150, F250, F350 pickup trucks, and 1980-96 Bronco models. Each door door hinge is manufactured in stamped steel to factory specification replicating the original in design,...
1994-95 Mustang; Power Outer Door Mirror; Drivers Side; Paintable
Reproduction of the original remote power door mirrordesigned for use with 1994-95 Mustang models. Factory style remote power mirrors will fit and function as original and replace your faded or worn out originals. Includes...
Reproduction door window regulator for 1980-97 Ford F100, F150, F250, F350 pickup truck models, and 1980-96 Bronco models with power windows. Each window regulator is manufactured in quality materials to factory...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1994-04 Mustang; Hood Latch Cable
Reproduction of the hood latch cable designed to replace the damaged or broken original for 1994-2004 Mustang models. Manufactured to factory specifications featuring the correct pull handle for proper function and...
1994-95 Ford Mustang; Hood Latch Assembly ; Early Style Design; To 07/95
Reproduction of the original hood latch mechanism designed for use with 1994-95 Ford Mustang models. Each hood latch is manufactured in quality stamped steel to factory specifications for proper fitment and function. Fits...
U-Nut Set; M6 - 1.0; Panel Range.030" to.160"; Black Phosphate; 25 Piece Set
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160"). Set of 25 u-nuts. Specifications: OE #: 11503957 Quantity:...
1987-96 Ford F-Series Truck; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge for various 1987-96 Ford F-Series trucks. Produced in stamped steel construction and plated for corrosion resistance. Fits RH, passenger side. Replaces OE Number: F2TZ16796A, or Partslink Number:...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
Installation hardware set for various 1985-92 Camaro models including IROC-Z models. Each set includes 18 of reproduction # 11508023 bolt. Specifications: Quantity: Set of 18 Class: 9.8 Color: Black Phosphate Material: Steel...
Tapping Screw; Hex Washer Head; #8-18 x 1/2" Long; Black Oxide
Hex, washer head #8-18 x 1/2 tapping screw, in phosphate and oil coating for various applications including mounting grill to various classic vehicles Screw Specs: Description : Tapping Screw Screw Size : #8 Length : 1/2"...
1994-98 Mustang; Outer Door Handle; Drivers Side
Replacement outer door handle for use with 1994-98 Ford Mustang models. Replace your original broken or damaged door handle with this quality reproduction. This handle is manufactured in injection-molded ABS and includes...