1967-02 Accelerator Pedal Tension Spring
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
1991-96 Chevrolet Caprice/Impala; Fuel Tank Kit; With Neck, Hoses, Clamps, and Hardware
OER Replacement silver powder-coated steel fuel tank for 1991-96 Caprice/Impala and other GM models. The original plastic fuel tank is the weak link in the fuel system of the full size GM passenger car. Prone to cracking and...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
1984-96 Chevrolet Corvette; Fuel Tank; Zinc Coated; 20 Gallon Capacity
Reproduction fuel tank for 1984-1996 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a 20...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1990-97 Chevy, GMC Pickup; Zinc Coated Fuel Tank; Gas Powered; 2-Door Extended Cab; 31 Gallon Tank
Correct reproduction fuel tank for 1990-97 Chevrolet and GMC pickup truck models with 2 door extended cab. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and corrosion...
Correct reproduction of the original fuel tank designed for with 1992-97 Chevrolet and GMC 3500 pickup truck models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and...
1990-97 Chevrolet, GMC Pickup 1500, 2500 Fuel Tank; 2-Door Extended Cab; Diesel Fuel; Zinc Coated
Correct reproduction of the original fuel tank designed for with 1990-91 Chevrolet and GMC C/K 1500/ 2500 Diesel fuel pickup trucks, and 1992-97 1500/2500 models with Diesel (except 3500). This reproduction fuel tank is...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1988-95 Chevrolet, GMC Truck; Fuel Tank Sending Unit; with Fuel Injection; EEC
Reproduction of the original fuel tank sending unit for use with 1988-95 Chevrolet and GMC truck models. Manufactured to factory specifications, each sending features 4 outlets and replaces the original exactly. Designed for...
Reproduction fuel tank support hanger, bracket and strap for 1988-98 Chevrolet and GMC C/K-Series GMT400 truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1982-92 Camaro, Firebird; Fuel Tank Filler Neck
The original GM tank on 1982-92 models suffered from an inherent flaw at the neck joint, and were recalled back-in-the-day for leaking around the solder joint, which was prone to cracking at the seam. Our reproduction fuel...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original OE rubber bumper for use with 1979-86 Chevrolet and GMC C/K pickup truck models, and 1987-91 Chevrolet and GMC R/V models. Also fits other areas of the vehicle including the heat exhaust shield,...