1982-92 Chevrolet Camaro; Dash Pad; Vinyl Wrapped; Black; Made in the USA!
Correct vinyl-wrapped reproduction padded dash for 1982-1992 Chevrolet Camaro models. Replace the original warped or cracked dash pad with this quality reproduction designed to fit and function the same as your original....
1992-94 Chevrolet, GMC Pickup, Blazer, Suburban, Yukon; Interior Dash Panel Assembly
Reproduction instrument dash panel assembly for 1992-94 Chevrolet, GMC C/K GMT400 pickup, Blazer, Yukon, Suburban models. Each Dash instrument panel assembly is manufactured in injection molded ABS to correct factory...
Dash Instrument Socket; 5/8" Hole; For 158, 194, or 194A Light Bulbs
Lamp bayonet style socket for general use with 158, 194, or 194A light bulbs.
1955-83 Chevy, Buick, Pontiac, Olds; Cigarette Lighter Heating Element; Rochester Style
Correct reproduction cigarette lighter heating element for various 1955-83 models equipped with Rochester lighters. This element will replace the non-working original and get your lighter working again. Remove the old element...
1988-94 Chevrolet, GMC Truck; 1992-94 Blazer, Suburban, Yukon; Instrument Cluster Carrier; Black
OER® Authorized reproduction of the original instrument cluster gauge carrier for 1988-94 Chevrolet and GMC C/K Pickup truck models (GMT400 Series), and 1992-94 Blazer, Yukon, and all Suburban models. Manufactured in ABS...
1988-94 Chevy, GMC Pickup, Blazer, Suburban,Yukon; Instrument Panel Cluster Trim Pad; Black
Reproduction instrument panel pad for 1988-94 C/K (GMT400 Series) Pickups, and 1992-94 SUV models including Blazer, Yukon, Suburban models. Produced in ABS injection molded materials with the necessary foaming, hot melting...
Reproduction dash gauge bezel for 1988-94 Chevrolet, GMC C/K pickup and 1992-94 Blazer, Tahoe, Yukon, and Suburban models with AC. Each dash bezel is manufactured in quality injection molded ABS plastic featuring the original...
1990-92 Chevrolet Camaro; Printed Circuit; with Gauge Package
This is a high quality reproduction of the printed circuit for the back of the instrument cluster assembly. Meticulously manufactured to exact factory specifications, each printed circuit will replace the original...
Instrument Panel Socket; 1/2" Hole; For 158, 194, or 194A Light Bulbs
Lamp bayonet style socket for general use with 158, 194, or 194A light bulbs. Fits a wide range of 1955-1997 models that require a socket to fit a 1/2" hole. Vehicle Application Summary 1955-1987 Buick 1955-1987 Cadillac...
Reproduction Casco cigarette lighter knob, element, housing, and retainer for various 1964 GM models including Chevrolet Biscayne, Bel Air, and Impala models. This is an exact reproduction of the knob style originally...
Reproduction of the original dash instrument panel trim for 1988-94 Chevrolet & GMC C/K pickup trucks, and 1992-94 Blazer, Tahoe, Yukon, and Suburban models. It is the L-shaped trim that goes on the RH side of the instrument...
GM Printed Circuit Board Terminals; Set of 20
Reproduction set of the printed circuit board terminals for various 1991-94 GM models. Sold in a set of 20. Use as required. For individual terminals use 25058823
Reproduction original style headlamp and dimmer switch mounting plate for use with 1988-94 Chevrole, GMC C/K pickup, 1992-94 Blazer, Tahoe, Yukon, and Suburban models. This mounting plate is mnufactured in quality injection...
Restore proper function to your original cigarette lighter with this reproduction Casco-style 1" lighter heating element. Designed as a direct replacement for Casco #72 element, this unit repairs 1960-75 GM applications...
Restore functionality to your vehicle's original cigarette lighter with this Casco-style replacement lighter heating element designed for vehicles equipped with a 7/8" element. Built to OE specifications, this replacement is...
1982-93 Camaro, Firebird, Malibu Models; Diagnostic Connector Port; Trim Cover
Replacement diagnostic connector port cover for various 1982-93 GM applications including Camaro, Grand Prix, Cutlass, and Regal models. This is the cover for the port where you plug in the diagnostic computer into the...
GM Printed Circuit Board Terminal; Each
Reproduction of the printed circuit board terminal for various 1991-94 GM models. Use as required. For a set of 20 use 25058823K
1982-92 Camaro Headlamp Switch Nut
This is an OER® reproduction of the mounting nut used for retaining the headlamp switch to the dash on 1982-92 Camaro models. Manufactured from injection molded plastic, this nut installs through the dash and threads into...
Reproduction Casco style cigarette lighter assembly including the knob and 1" long heating element for 1961-63 Impala and Full Size Chevrolet passenger car and various other Chevrolet models. Designed and manufactured by...
Reproduction cigarette lighter housing assembly for vehicles equipped with lighters that use 7/8" Casco style elements. This lighter housing is designed for various GM models including Camaro, Corvette, Firebird, Impala, and...
Reproduction of the original Casco type cigarette lighter assembly designed for use on various 1984-92 GM models. Includes the cigarette lighter receiver, retainer, knob, and element and features the correct screen printed...
Reproduction instrument cluster lens for 1992-94 Chevy and GMC pickup truck models with tachometer, without Sport package,. This outstanding reproduction lens is manufactured with quality injection-molded UV acrylic for an...
1988-94 Chevy, GMC Pickup, 1992-94 Blazer, Tahoe, Yukon, Suburban; Steering Column Cover; Black
Reproduction steering column cover for 1988-94 Chevrolet, GMC C/K pickup and 1992-94 Blazer, Tahoe, Yukon, and Suburban models. This steering column cover installs in the area beneath the dash under the steering column....
Dash Instrument Socket and Bulb ; 5/8" ; Bayonet-Style
OER® reproduction of the original bayonet style instrument cluster lamp socket for use on most car and truck dashes. Each socket is manufactured injection molded ABS replicating the original in quality and fitment....
1967-91 GM; Various Models; Glove Box Screw Set; 7 Pieces
Includes a complete set of correct mounting screws required to install the inner dash glove box on most 1967-91 GM models. You'll get the original style screws for a detailed appearance. For glove box screws for pre-1967 GM...
Glove box screw set for most 1947- 66 GM trucks and 1949-66 GM cars as well as early Ford Mustangs. This set is original equipment for multiple GM applications. They can be used for other applications as a service...
1982-92 Camaro; Center Dash Pad Support Block; Each
OER® reproduction of the original center dash pad supports designed for use on all 1982-92 Chevrolet Camaro models. These rubber pads are glued to the underside of the dash pad near the center to support the pad and...
1972-92 Cigarette Lighter Housing; Rochester; Short Stud Type
Reproduction of the original cigarette lighter housing for use on various GM models. Manufactured to OE specifications. If your lighter isn't operating properly, it may be due to the housing connection. This is a reproduction...
1982-92 Camaro, Firebird; Rear Console Ash Tray & Lid
Reproduction of the original rear consol ash tray cover receiver. The ash tray receiver is manufactured in injection molded ABS in the correct grain replicating the original in quality and design. Ash tray door folds in when...
This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...
Reproduction of the original dash instrument panel trim for 1988-94 Chevrolet & GMC C/K pickup trucks, and 1992-94 Blazer, Tahoe, Yukon, and Suburban models. It is the L-shaped trim with the defroster vent that goes on the LH...
Replacement Bulb T-3 1/4 Mini Bayonet 2 CP 0.33 Amps
Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.
Replacement Bulb T-3 1/4 Mini Bayonet 2 CP 0.24 Amps
Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.
1988-94 Chevy, GMC Pickup, 1992-94 Blazer, Tahoe, Yukon, Suburban; Fuse Box Cover; Black
Reproduction fuse box cover for the dash in 1988-94 Chevrolet, GMC C/K pickup trucks, 1992-94 Blazer, Tahoe, Yukon, and Suburban models. Each fuse box cover is manufactured in quality injection molded ABS plastic featuring...
When installing your 1962-74 glove box, replace your missing or damaged screws with these quality reproductions for a correct installation. This part is original equipment for multiple Mopar applications, it can be used for...
1990-92 Chevrolet Camaro; Headlamp Switch Knob
Correctly-designed OER reproduction headlamp switch knob and shaft for 1990-92 Camaro models. Each knob is reproduced to original specifications and features the correct light markings on the knob as well as the correct...
Replacement Bulb T-3 1/4 Mini Bayonet 3 CP
Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.
Blue 38 Teeth Speedometer Gear
This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...
Reproduction AC or heater vent trim plate with vent deflector for the RH side of the dash in 1988-94 Chevrolet/GMC C/K pickup and 1992-94 Blazer, Tahoe, Yukon, and Suburban models. Manufactured in quality injection molded ABS...
12 Volt: Auxiliary Power Outlet; With Cover
Add an additional 12V power outlet to your vehicle with a universal fit 12 volt power outlet assembly with cover. The plastic cover prevents dirt and moisture from entering the socket. This dependable source of 12V power,...
Reproduction lighter housing receiver to fit a wide variety of vehicles that came equipped with Casco style cigarette lighters that feature a 1" tall element. The lighter housing is mounted in the dash, and in most GM models,...
1986-92 Camaro; Cigarette Lighter and Knob
Reproduction cigarette lighter assembly for 1986 and 1990-92 Camaro models. Each lighter assemby is manufactured to exact specifications and is to be used with an original Rochester housing, or reproduction housing sold...
1976-78 Chevrolet Chevette; Headlamp Switch; Universal Fit;
Reproduction of the hard-to-find switch to replace original inoperative headlamp switch on 1976-78 Chevette. This reproduction switch will fit exactly as original and is designed as a service replacement for original GM part...
Glove Box Ash Tray Rubber Bumper
OER® reproduction instrument panel ash tray anti-rattle bumper. Manufactured to factory specifications from correct rubber material to fit and function as original. Sold individually, 2 required per vehicle. Applications:...
1445 Intrument Panel Light Bulb; Mini Bayonet; Clear; Type: G-3 1/2; Brightness: 000.7 CP
Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.
1982-93 Glove Box Door/Ashtray Bumper
Reproduction of the anti-rattle rubber bumper for the glove box door on 1982-85 Impala and 1982-93 Caprice models and for the ash tray on 1990 Caprice models. Measures 5mm in height and fits a 3mm hole. 2 required per...