1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1973-91 Chevrolet, GMC 3/4, 1 Ton 2WD Truck; Lower Control Arm; LH Driver Side
Reproduction of the original lower control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1973-91 Chevrolet/GMC C20/C30 Truck; Upper Control Arm; 3/4, 1 ton; 2 WD; LH Driver Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1981-91 Chevy, GMC 4WD Pickup, Blazer, Jimmy, Suburban; Front Leaf Spring Support Bracket; Each
Replace your damaged or rusted original front leaf spring support bracket with this high quality reproduction designed for a wide variety of Chevrolet and GMC 4WD truck models from 1981-1991. Each bracket is engineered to fit...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
Drop spindles provide the most effective way to lower your truck while preserving factory ride comfort, handling, and suspension geometry. This high quality set includes a matched pair of 3 inch lowering spindles engineered...
Drop spindles are the best way to lower your truck while keeping the factory ride quality, suspension geometry, and handling characteristics intact. This high quality kit includes a matched pair of 3 inch lowering spindles...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
1970-96 GM Lower Control Arm Bumper, Each, Various Models
OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...
1973-91 Chevrolet/GMC C20/C30 Truck; Upper Control Arm; 3/4, 1 ton; 2 WD; RH Passenger Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1970-93 Chevy, GMC, Ford, Dodge Truck; Upper Ball Joint; RH or LH; Each
OER® Authorized reproduction of the original type upper ball joint designed for use with a wide variety of 1970-91 GM, 1971-80 Ford, 1972-93 Dodge and Plymouth truck models. The upper ball joint is manufactured to factory...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
1971-2005 GM; Rear Lower Control Arm Bushing; Each; Various Models
Reproduction control arm bushing for the lower control arm on various 1971-2005 GM models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or going over...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...