Product#: CV154109

1971-96 Chevrolet, GMC G-Series Van; Outer Lower Rocker Panel; LH Driver Side; EDP Coated

Reproduction driver side rocker panel for 1971-96 Chevrolet and GMC G-Series Van models. Each rocker panel is manufactured in quality stamped steel offering an authentic replacement for old or damaged originals. Measures 69"...


Product#: CV154108

1971-96 Chevy, GMC G-Series 125" Wheelbase Van; Lower Front Quarter Panel Repair Section; Stamped Steel; RH Passenger Side

Stamped steel lower rear quarter patch panel for 1971-96 Chevrolet and GMC G-Series vans. Positioned in front of the rear wheel, at the rocker level, each panel is produced in stamped steel to replace the rusted or damaged...


Product#: M112

Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"

Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...


Product#: *84L020

Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....


Product#: M111

Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"

Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...


Product#: 1667195

1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...


Product#: K89561

OER® Professional Grade; Black Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...


Product#: K89567

OER Professional Grade; Weld-Thru Galvanizing Spray Coating; Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz)

OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). Perfect for...


Product#: *K89665

OER® Gray Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans

A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...


Product#: *K89677

OER® Gloss Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...


Product#: *K89678

OER® Flat Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...


Product#: K89576

OER® Professional Grade; Gray High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)

A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...


Product#: *K89668

OER® Professional Grade Gray Weld-Thru Galvanizing Spray Coating Case of 6 - 16 Oz Aerosol Cans

OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Perfect for application on the inside of newly installed panels...


Product#: *K89681

OER® Dark Gray High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...


Product#: *K89680

OER® High Solids Stainless Steel Detail Coating Case of 6 - 16 Oz Aerosol Cans

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...


Product#: K89562

OER Professional Grade Red Oxide Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 17...


Product#: K89577

OER® Gloss Black High Solids Detail Coating 16oz Net Weight

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...


Product#: K89565

OER® Professional Grade; Green Zinc Phosphate Primer; 16 Oz. Aerosol Can (Net Wt 12 Oz)

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...


Product#: K89575

OER® Professional Grade; Red Oxide High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz)

A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...


Product#: *K89664

OER® Red Oxide Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans

A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...


Product#: K89560

OER® Professional Grade; Gray Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 15 Oz.)

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 15...


Product#: *K89666

OER® Professional Grade Green Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...


Product#: *K89667

OER® Professional Grade Yellow Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...


Product#: *K89549

OER® Black Wrinkle Finish Paint Case of 6 - 16 Oz Aerosol Cans

Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...


Product#: *K89679

OER® Aluminum High Solids Detail Coating Case of 6- 16 Oz Aerosol Cans

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...


Product#: *K89660

OER® Gray Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...


Product#: *K89661

OER® Black Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...


Product#: *K89662

OER® Red Oxide Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...


Product#: K89580

OER® High Solids Stainless Steel Detail Coating 16 Oz Net Weight Aerosol Can

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...


Product#: K89566

OER® Professional Grade; Yellow Zinc Phosphate Primer; 16 Oz Aerosol Can (Net Wt. 12 Oz.)

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...


Product#: K89579

OER High Solids Coating Aerosol; Aluminum; 20 Oz Aerosol Can (Net Wt. 16 Oz.)

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...


Product#: 84L017

Ford, Lincoln, Mercury; Floor Pan Metal Plug; Each; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Can be used as a...


Product#: 11569768

Nylon Retainer Clip; Push-In; 11/16" Head Diameter; 5/16" Stem Diameter; 13/16" Stem Length; Black

Black nylon retaing clip that pushes into a 5/16" hole to install and secure various components OEM Part Number Cross Reference: GM: 11569768, 15958694, 1605396 Chrysler: 6030441 Ford: 388577S, W705589-S300 Specifications:...


Product#: *K51494

OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...


Product#: *K51495

OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...


Product#: *K89669

OER® Rubberized Undercoating Case of 6 - 20 Oz Aerosol Can

This OER® black rubberized undercoating is for use on automotive under surfaces. Sprays evenly, dries completely to a smooth consistency and can be top-coated with any type of automotive finish. Benefits: Prevents rust...


Product#: K89581

OER High Solids Detail Coating; Dark Gray; 20 Oz Aerosol Can (Net Wt. 16 Oz.)

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...


Product#: K51498

Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER

After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...


Product#: *K51490

OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...


Product#: *K51492

OER Gray and White Trunk Refinishing Kit with Standard Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....


Product#: *K51493

OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...


Product#: K89578

OER High Solids Coating Aerosol; Flat Black; 20 Oz Aerosol Can (Net Wt. 16 Oz.)

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...


Product#: K89570

OER® Rubberized Undercoating; 20 Oz Aerosol Can (Net Wt. 18 Oz.)

This OER® black rubberized undercoating is for use on automotive under surfaces. Sprays evenly, dries completely to a smooth consistency and can be top-coated with any type of automotive finish. Comes in a 20 Oz. Aerosol...


Product#: K89548

Black OER® Wrinkle Finish Paint; 16 Oz. Aerosol Can (Net Wt. 12 Oz.)

Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...


Product#: K89520

OER Underhood Detail Paint; Dark Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)

OER® Underhood Detail Paint is a durable underhood coating used for detailing underhood items like hood hinges, safety and hood latch assembly, carburetors, pulleys, accelerator and transmission linkage, nuts, bolts,...


Product#: *C15319

GM, Chrysler, Ford; Nylon Retainer Clip; Push-In; 11/16" Head Diameter; 5/16" Stem Diameter; 13/16" Stem Length; 25 Piece Set

Reproduction of the retainer that pushes into a 5/16" hole to install various componants. Manufactured to fit and function as original. OEM Part Number Cross Reference: GM: 11569768, 15958694, 1605396 Chrysler: 6030441 Ford:...