Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
1987-93 Mustang GT; Front Bumper Cover
Reproduction of the original front bumper cover designed for use with 1987-93 Mustang GT models. Each bumper cover is manufactured to factory specifications for proper fitment and appearance. Will replace the old or damaged...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
Reproduction windshield glass for 1979-1993 Ford Mustang Notchback or Hatchback models. The windshield is manufactured to exact factory specifications ensuring an original fitment and appearance. Replacing your original...
1987-96 Ford F-100, F-250, F-350 Styleside Truck; Rear Tailgate
Reproduction of the original tailgate designed for use with 1987-96 Ford F150, F250, F350 pickup truck models. The main assembly is manufactured in quality automotive-grade stamped steel replicating the original factory...
OER reproduction windshield glass for all 1979-1993 Ford Mustang Hatchback models. This replacement windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road debris....
OER reproduction windshield glass for all 1983-93 Mustang Convertible models. This replacement windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road debris. Each...
1980-96 Ford Bronco; Rear Window Glass; Non-Heated; Clear; OER
OER reproduction of the original back window glass designed for use with Ford Bronco models. Each glass is manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace scratched, damaged or...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1980-96 Ford F-Series Pickup, F-100, F-150, F-250, F-350; Rear Window Glass; 1/8" Tempered; Clear
Reproduction stationary flat back window glass for 1980-96 Ford F-Series truck including f-100, F-150, F-250, F-350 models. Each glass is manufactured with the proper shape, curvature, and pattern in factory equivalent 1/8'...
1987-93 Mustang; Window Regulator With Motor; T-Top, Convertible; Drivers Side
Reproduction of the original power window regulator and motor assembly designed for use with 1987-93 Mustang t-top and convertible models. Manufactured to factory specifications for proper fitment and function. Lift motor is...
1979-93 Mustang; Rear Bumper Reinforcement
Reproduction rear bumper reinforcement for 1979-93 Mustang models. Manufactured to factory specifications for proper fitment and function. Comes with EDP coating for rust and corrosion prevention. Note: Ships Double Oversize.
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1985-93 Mustang; Convertible Top Hose Set; with Power Top; Upper And Lower; Made in the USA!
Reproduction of the original hydraulic hose set designed for use with 1985-93 Mustang convertible models as listed. Finding an original hose for your early convertible is next to impossible. If you own a convertible model...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
OER reproduction of the original style door window glass for 1983-93 Ford Mustang Sedan or Hatchback, and 1983-86 Mercury Capri Sedan or Hatchback models. Replacing the original damaged or missing door window glass can...
1979-93 Mustang; Door Latch Assembly; Passenger Side
Reproduction of the original door latch assembly designed for use with 1979-93 Mustang models This reproduction door latch assembly is manufactured to correct factory specifications. This door latch is located inside the door...
1979-93 Mustang; Door Latch Assembly; Drivers Side
Reproduction of the original door latch assembly designed for use with 1979-93 Mustang models This reproduction door latch assembly is manufactured to correct factory specifications. This door latch is located inside the door...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1987-96 Ford F150, F250, F350, Bronco; Door Window Glass; Clear; LH Driver Side
Reproduction of the original door glass for 1987-96 Ford F-Series pickup trucks and Bronco models. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original...
1987-96 Ford F150, F250, F350, Bronco; Door Window Glass; Clear; RH Passenger Side
Reproduction of the original door glass for 1987-96 Ford F-Series pickup trucks and Bronco models. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original...
1980-96 F-100, F-150, F-250, F350 Truck, Bronco; Outer Rocker Panel; LH Driver Side
Reproduction driver side outer rocker panel for 1980-96 Ford F-Series regular cab trucks including F150, F250, and F350 models. Also fits 1980-83 F100 and 1980-96 Bronco. This patch panel is manufactured from 19 gauge sheet...
1980-97 F-100, F-150, F-250, F350 Truck, Bronco; Outer Rocker Panel; RH Passenger Side
Reproduction passenger side outer rocker panel for 1980-96 Ford F-Series regular cab trucks including F150, F250, and F350 models. Also fits 1980-83 F100 and 1980-96 Bronco. This patch panel is manufactured from heavy gauge...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1987-96 Ford F150, F250, F350, Bronco; Door Window Glass; Tinted; RH Passenger Side
Reproduction of the original door glass for 1987-96 Ford F-Series pickup trucks and Bronco models. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original...
1980-91 Ford F-100, F-150, F-250, F-350, Bronco; Manual Door Window Regulator; Drivers Side
Reproduction manual style door window regulator for 1980-91 Ford F100, F250, and F350 pickup trucks, and 1980-91 Bronco models without power windows. Each window regulator is manufactured in quality materials to factory...
1980-91 Ford F-100, F-150, F-250, F-350, Bronco; Manual Door Window Regulator; Passenger Side
Reproduction manual style door window regulator for 1980-91 Ford F100, F250, and F350 pickup trucks, and 1980-91 Bronco models without power windows. Each window regulator is manufactured in quality materials to factory...
1983-88, Late 1991-93 Mustang 34-1-2" Convertible Top Tension Cables
The best time to replace these tension cables is when getting a new top put on your Mustang. These cables are designed to fit just like originals, using steel braided cables to keep the convertible top in place for years to...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
1980-96 Ford F-150, F-250, F-350, Bronco; Upper Door Hinge; LH; Driver Side
Reproduction upper door hinge for 1980-96 F100, F150, F250, F350 pickup trucks, and 1980-96 Bronco models. Each door door hinge is manufactured in stamped steel to factory specification replicating the original in design,...
Reproduction door window regulator for 1980-97 Ford F100, F150, F250, F350 pickup truck models, and 1980-96 Bronco models with power windows. Each window regulator is manufactured in quality materials to factory...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1979-93 Mustang, Capri, Cougar; Outer Door Handle; Die-Cast; Black; LH Drivers Side
Reproduction "first-design" die-cast outer door handle for 1979-93 Mustang, 1979-86 Mercury Capri and a wide variety of additional Ford and Mercury models. Manufactured in die-cast metal to 1979-84 Ford factory...
1987-91 Ford F-150, F-250, F-350; Front Bumper Lower Air Deflector
Reproduction lower front air deflector to fill the space between the bumper and the grill. Each deflector is produced in heavy gauge steel just like the factory original part. When quality and original gauge material matters,...
U-Nut Set; M6 - 1.0; Panel Range.030" to.160"; Black Phosphate; 25 Piece Set
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160"). Set of 25 u-nuts. Specifications: OE #: 11503957 Quantity:...
1979-93 Mustang, Capri, Cougar; Outer Door Handle; Die-Cast; Chrome; LH Drivers Side
Reproduction "first-design" die-cast outer door handle for 1979-93 Mustang, 1979-86 Mercury Capri and a wide variety of additional Ford and Mercury models. Manufactured in die-cast metal to 1979-84 Ford factory...
1979-93 Mustang; Windshield Wiper Arm; Black; Side Lock Design
Reproduction of the original windshield wiper arm designed for use with 1979-1993 Mustang models. Each wiper arm is manufactured to original factory specifications and replicates the original in design and fitment. Comes in...
1987-96 Ford F-Series Truck; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge for various 1987-96 Ford F-Series trucks. Produced in stamped steel construction and plated for corrosion resistance. Fits RH, passenger side. Replaces OE Number: F2TZ16796A, or Partslink Number:...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
Installation hardware set for various 1985-92 Camaro models including IROC-Z models. Each set includes 18 of reproduction # 11508023 bolt. Specifications: Quantity: Set of 18 Class: 9.8 Color: Black Phosphate Material: Steel...
Tapping Screw; Hex Washer Head; #8-18 x 1/2" Long; Black Oxide
Hex, washer head #8-18 x 1/2 tapping screw, in phosphate and oil coating for various applications including mounting grill to various classic vehicles Screw Specs: Description : Tapping Screw Screw Size : #8 Length : 1/2"...
Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate
Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...