This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
1984-96 Chevrolet Corvette; Fuel Tank; Zinc Coated; 20 Gallon Capacity
Reproduction fuel tank for 1984-1996 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a 20...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1982-91 Chevy, GMC Suburban; Zinc Coated Fuel Tank; Gas or Diesel; 40 Gallon
Correct reproduction of the original fuel tank designed for with 1982-91 Chevrolet and GMC Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and corrosion...
Reproduction of the original style fuel tank designed for use with 1985 Impala, 1985-89 Caprice Full Size models with Fuel Injection. This fuel tank is manufactured in zinc-coated stamped steel to original factory...
Reproduction fuel tank for carbureted gasoline or diesel powered 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac models. This fuel tank is manufactured in zinc-coated stamped steel to original factory...
Reproduction of the original style fuel tank designed for use with 1980-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac Full Size models as listed except station wagon. This fuel tank is manufactured in zinc-coated...
Correct reproduction of the original fuel tank designed for 1992 Chevrolet Blazer, 1995-99 Chevrolet Tahoe and 1992-99 Yukon models. This reproduction fuel tank is manufactured in zinc coated steel to protect against...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1988-97 Chevrolet, GMC Pickup; Fuel Tank Neck and Evaperator Hose Set; with Clamps
Reproduction of the original fuel tank filler neck, hoses, and hardware kit designed for use with 1988-97 gas Chevrolet and GMC C/K series pickup truck models. Filler necks are manufactured using heavy duty steel replicating...
1985-92 Camaro, Firebird; Fuel Tank Sending Unit
After years of use, your fuel sending unit can corrode. Its float can flood, and it can simply stop working, causing your fuel gauge to read incorrectly or even not at all. This Delco Service Replacement will replace your...
1987-91 Chevrolet, GMC R/V Series; Fuel Tank; Long Bed Pickup; 20 Gallon; Zinc Coated
Correct reproduction of the original fuel tank for 1987-91 Chevrolet and GMC R/V Series (square body) long bed pickup truck models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating...
1973-91 Chevrolet, GMC Pickup Truck; Rear Fuel Tank Support Hanger; Bracket with Strap; Each
Reproduction fuel tank support hanger, bracket and strap for 1973-87 Chevrolet and GMC truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an original appearance...
1973-91 Chevrolet, GMC Pickup; Front Fuel Tank Support Hanger; Bracket with Strap; Each
Reproduction of the original rear fuel tank support hanger, bracket and strap designed for use with for 1973-87 Chevrolet and GMC truck models. Each support hanger is manufactured in quality stamped steel to original factory...
1988-95 Chevrolet, GMC Truck; Fuel Tank Sending Unit; with Fuel Injection; EEC
Reproduction of the original fuel tank sending unit for use with 1988-95 Chevrolet and GMC truck models. Manufactured to factory specifications, each sending unit features 4 outlets and replaces the original exactly. Designed...
1979-91 Chevrolet, GMC Truck; Fuel Door; Fleetside; Square Style
Reproduction fuel door for various 1979-1986 C/K and 1987-1991 R/V Chevrolet & GMC pickup and truck models. This stamped steel galvanized fuel door is manufactured to correct factory specifications and replaces the original...
1980-89 Chevrolet, GMC Pickup Truck; Fuel Tank Sending Unit; LH Mounted Tank; 3 Outlets
Reproduction of the original fuel tank sending unit designed for use with 1980-89 Chevrolet and GMC pickup truck models with 3 line driver side fuel tank. After years of use, your fuel sending unit can wear out or stop...
Reproduction fuel tank support hanger, bracket and strap for 1988-98 Chevrolet and GMC C/K-Series GMT400 truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an...
1980-89 Chevrolet, GMC Pickup Truck; Fuel Tank Sending Unit; RH Mounted Tank; 3 Outlets
Reproduction fuel tank sending unit for 1980-89 Chevrolet and GMC pickup truck models with 3 line passenger side fuel tank. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1980-89 Chevrolet, GMC Truck; Fuel Tank Sending Unit; LH Mounted Tank; 3/8" Inlet; 2 Outlets
Reproduction fuel tank sending unit for 1980-89 Chevrolet and GMC pickup truck models with 2 lines on the driver's side of the fuel tank. After years of use, your fuel sending unit can wear out or stop working. When that...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet, GMC truck models as listed. For use on all 1973-86 C/K truck models, and 1987-91 R/V series with 16 gallon or 20 gallon saddle...
1982-91 Blazer, Jimmy, Suburban; Fuel Filler Hose
Reproduction fuel tank filler hose for 1982-91 Chevrolet and GMC Blazer, Jimmy, and Suburban models. Chevrolet Applications: 1982-1991 Chevrolet Blazer 1982-1991 Chevrolet Suburban GMC Applications: 1982-1991 GMC Jimmy...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1984-91 Chevy Blazer, GMC Jimmy, Suburban; Fuel Filler Neck; Diesel Fuel Only
Reproduction fuel tank filler neck for 1984-91 diesel or leaded gasoline powered Chevrolet and GMC SUV Models including Full Size Blazer, K5 Blazer, Full Size Jimmy, and Suburban models. Filler necks are manufactured using...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1982-92 Camaro, Firebird; Fuel Tank Filler Neck
The original GM tank on 1982-92 models suffered from an inherent flaw at the neck joint, and were recalled back-in-the-day for leaking around the solder joint, which was prone to cracking at the seam. Our reproduction fuel...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet Blazer, Suburban, and, GMC Jimmy, Suburban models with 31 gallon fuel tank. Each strap is manufactured in quality stamped steel,...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1988-2000 Chevy, GMC Truck; Fuel Tank Mount Straps; 6" Bed, 25 Gal Tank; Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1988-2000 Chevrolet and GMC pickup truck models. Each strap is manufactured in quality to original factory dimensions replicating the original...
Reproduction of the original fuel tank mounting straps designed for use with 1988-2000 Chevrolet, GMC pickup truck models with 8 foot bed, 34 gallon tank. Each strap is manufactured in quality stamped steel, galvanized and...
Reproduction of the original fuel tank mounting straps designed for use with 1988-2000 Chevrolet, GMC pickup truck models with 8 foot bed, 34 gallon tank. Each strap is manufactured in quality stainless steel for long-lasting...
1979-89 Chevrolet, GMC Fleetside Pickup; Fuel Tank Vent Pipe Hose; Upper
Reproduction vent pipe hose for 1979-86 Chevrolet and GMC C/K fleetside trucks and 1987-89 R/V fleetside trucks. Made of rubber, and fits on the RH side on 1979-80 fleetside models and LH side on 1981-87 Shortbed models with...
Reproduction of the original OE rubber bumper for use with 1979-86 Chevrolet and GMC C/K pickup truck models, and 1987-91 Chevrolet and GMC R/V models. Also fits other areas of the vehicle including the heat exhaust shield,...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1982-92 Camaro, Firebird; NiTerne Coated Fuel Tank; with Fuel Pump In Tank; 14 Gallon
Quality reproduction of the original fuel tank designed for use with 1982-92 Camaro and Firebird models with the fuel pump in the tank. Each fuel tank is manufactured to factory specifications and features an original,...
Quality reproduction of the original fuel tank designed for use with 1982-92 Camaro and Firebird models with the fuel pump in the tank. Each fuel tank is manufactured to factory specifications and features a zinc plating for...
1988-97 Chevrolet, GMC C/K Truck; Fuel Tank; Zinc Coated; 34 Gallon
Reproduction fuel tank assembly for 1988-1997 Chevrolet & GMC 2 door (C/K) pickup truck models. Comes complete with the locking ring for the fuel sender and the fuel sender sealing O-ring. Each tank is manufactured in stamped...
1988-2000 Chevrolet, GMC C/K Short Bed Pickup; Zinc Coated Fuel Tank; 25 Gallon; Standard Cab
Replacement fuel tank for various 1988-00 Chevrolet and GMC truck models. This fuel tank measures 48 1/2" x 16 1/2" x 14 1/8". This fuel tank is zinc-coated steel and has a capacity of 25 gallons (95 liters), features a pan...
1986-91 Chevrolet, GMC Suburban; Zinc Coated Fuel Tank; for Fuel Injection Gas Engine; 40 Gallon
Correct reproduction of the original fuel tank designed for with 1986-91 Chevrolet and GMC Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and corrosion...
Reproduction of the original style fuel tank designed for use with 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon models. This fuel tank is manufactured in zinc-coated stamped steel to original...
Reproduction fuel tank for fuel injected gasoline powered 1977-1989 Impala, Caprice, Buick, Oldsmobile, and Pontiac models with electronic fuel control and pan in tank. This fuel tank is manufactured in zinc-coated stamped...
1987-91 Chevy GMC Blazer, Jimmy, Suburban; Zinc Coated Fuel Tank; w/Fuel Injection; 31 Gallon
Correct reproduction of the original fuel tank designed for with 1987-91 Chevrolet and GMC Blazer, Jimmy, and Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for...
1982-91 Chevrolet, GMC Long Bed Pickup Truck; Zinc Coated Fuel Tank; 20 Gallon
Correct reproduction of the original fuel tank designed for with 1982-91 Chevrolet and GMC pickup truck models. This reproduction fuel tank is manufactured in zinc coated steel. This is a 20 gallon fuel tank that replaces the...
1982-91 Blazer, Jimmy, Suburban; Zinc Coated Fuel Tank; 31 Gallon
This high quality replacement fuel tank for 1982-91 Jimmy, Blazer, and Suburban models measures 28-3/4" x 28-1/8" x 12-3/4" with a 1-5/8" I.D. fuel filler neck is manufactured in zinc coated steel to replace the original...
1989-96 Corvette; Fuel Sending Unit; with Filler Pipe, Gasket & Filter; Stainless Steel
Reproduction fuel sender for 1989-96 Corvette. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel level. Comes with filler pape, filter...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1982-92 Camaro, Firebird; Fuel Filler Neck Pocket Sleeve
Reproduction of the original style fuel filler neck pocket sleeve designed for use with all 1982-92 Camaro and Firebird models. Each sleeve is anufactured in injection-molded ABS to correct factory specifations offering an...
1996 Chevrolet S10, GMC S15, Jimmy; Fuel Tank; without Filler Neck; 19 Gallon
Correct reproduction of the original fuel tank designed for 1996 Chevrolet S10, S10 Blazer and GMC S15 Jimmy models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
1987-91 Chevrolet, GMC Truck; Fuel Sending Unit; RH Mounted Tank; 3 Outlets, with Fuel Injection
Reproduction fuel tank sending unit for 1987-91 Chevrolet and GMC pickup truck models with 3 outlets and passenger side fuel tank. After years of use, your fuel sending unit can wear out or stop working. When that happens, it...
1987-91 Chevrolet, GMC Truck; Fuel Sending Unit; LH Mounted Tank; 3 Outlets, with Fuel Injection
Reproduction of the original fuel tank sending unit designed for use with 1987-91 Chevrolet and GMC pickup truck models with 3 outlets and drivers side fuel tank. After years of use, your fuel sending unit can wear out or...
1973-91 Blazer, Jimmy; Fuel Filler Neck Cover
Reproduction stamped steel cover to seal the passenger compartment where the fuel filler neck protrudes through the quarter panel on 1973-91 BVlazer and Jimmy models. This cover was designed by the factory to improve the...
1982-92 Camaro, Firebird; Fuel Tank Filler Door
Reproduction fuel tank filler door for all 1982-92 Camaro & Firebird models as listed below. This fuel tank door is manufactured in injection molded ABS and replicates the original design, appearance, and fitment. Offered in...
1982-91 Chevy Blazer, GMC Jimmy, Suburban; Fuel Filler Neck; Unleaded Gasoline Models
Reproduction fuel tank filler neck for 1982-91 unleaded gasoline powered Chevrolet and GMC SUV Models including Blazer, Jimmy, Suburban. Filler necks are manufactured using heavy duty steel replicating the original design,...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...