1962-77 Buick, Chevrolet, Pontiac, Oldsmobile, A, X Body; Trunk Weatherstrip; Various Models
This reproduction trunk weatherstrip is designed for a wide variety of GM models and is a great solution for replacing worn, cracked, or flattened original trunk seals that can allow water, dust, and exhaust fumes into the...
OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...
1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER
Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...
1963-64 Impala, GM Full-Size; Roof Rail Weatherstrip; 2 Door Hardtop; Pair; Various Models
Correct reproduction of the original roof rail weatherstrips designed for use on 1963-64 Impala and GM Full Size 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...
Reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1965-66 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile Full Size 2 door hardtop or convertible models. Manufactured in...
1963-64 Impala, Electra, Wildcat; Door Frame Weatherstrip Seal; 2-Door Hardtop; Convertible, Pair
Quality reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1963-64 Impala and GM full size 2 door hardtop and convertible models. Manufactured in the correct configuration...
Reproduction back glass weatherstrip seal designed for various GM 2-door hardtop models including 1962-64 Impala, and Buick, Oldsmobile, and Pontiac 2-door pillarless coupe (non-post) cars. Will not fit sedan models with...
1961-2002 Buick, Chevy, Pontiac, Oldsmobile; Inner & Outer Door Handle Bumper; Each; Various Models
Reproduction door handle bumper manufactured to factory specifications from correct rubber material to fit and function as original. This rubber bumper is designed to protect the sheet metal of the door where the outer door...
1969-70 Impala Custom, Caprice, LeSabre, Wildcat; Molded Roof Rail Weatherstrip; 2-Door Coupe; Pair
Correct reproduction of the original roof rail weatherstrips designed for use on 1969-70 Impala Custom/Caprice models. Eliminate water or other elements from entering the passenger area by replacing these essential seals....
Reproduction of the original door frame weatherstripping designed for use on 1965-66 Chevrolet Impala Bel Air, Biscayne, Caprice, and Pontiac Catalina, and Bonneville 2-Door Sedan models. Each weatherstrip is designed to...
1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)
Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...
1958-73 GM; Door Frame Weatherstrip Plug Set; 26 Piece Set
Reproduction weatherstrip clip receiver for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert into. 26 required per door. 52 required...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models
Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...
1957-70 Buick, Cadillac, Chevy, Pontiac, Oldmobile; Trunk Weatherstrip; Various Full Size Models
Reproduction of the original trunk weatherstrip manufactured in the correct configuration. Prevent water damage in your trunk area by replacing the worn and damaged weatherstrip with this authentic reproduction. The soft...
1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models
Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...
Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural
This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...
Correct reproduction of the original roof rail weatherstrips designed for use on 1965-66 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...
Quality reproduction of the original quarter window weatherstrip designed for use on 1965-66 Impala and full size GM models. Manufactured with OEM type molded rubber material that replicates the original in authenticity and...
High quality reproduction of the original quarter window vertical weatherstripping manufactured with OEM style rubber material. Each weatherstrip includes a steel spine allowing an authentic appearance and fit. Installs...
1961-83 GM; Seat Back Rubber Bumper Stopper; Various Uses & Models; Each
Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. 1-3/16" long, diameter of...
1982-04 GM; Hood Adjustment Rubber Bumper & Bolt; 1" Diameter; Each; Various Models
Replace your original rubber hood adjuster stoppers with a correctly configured reproduction hood adjustment bumper. This part replace the adjuster bolt and the rubber bumper for a complete bolt-on replacement of the...
1967-68 Impala / Full Size Quarter Window Weatherstrip, Convertible, Pair
Quality reproduction of the original weatherstripping designed for use on 1967-1968 Impala convertible models. Each strip is manufactured with OEM type rubber material for authenticity and fit. Installs vertically on the side...
1959-73 GM; Door Frame Weatherstrip Plug Set; 52 Piece Set
Reproduction weatherstrip clip receiver for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert into. 26 required per door. 52 required...
1969-76 Buick Skylark, Electra, LeSabre; Rear Cowl Hood Stop Stud/Bolt; Rubber Coated; GM# 1237800
Rear cowl hood stop bolts for various 1969-76 Buick models including Skylark, Riviera, LeSabre and Electra models.This is the rubber coated hood stop bolt. It mounts on the cowl panel by the windshield when you close the...
1982-2012 GM Fuel Door; Door Pull Handle; Hood Stop; Sunroof. Rubber Bumper; Each; Various Models
Reproduction of the original style rubber bumper that fits a wide variety of 1982-2012 GM models and applications. Can be used for the fuel door, front and rear door pull handle, hood stop bumper, and sunroof control arm....
1987-2016 GM; Rear Trunk Lid Access Hole Plug; Each; Various Models
Reproduction trunk lid drain hole plug for 1987-2016 GM vehicles including 1991-96 Impala and Caprice models. Manufactured from molded rubber as original, these install on the underside of the trunk lid. Measures 9/165"...
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
Reproduction weatherstrip clip receiver seal for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert into. Sold individually. 26...
1961-79 GM; Bucket Seat Back Rubber Stopper Set; Round; w/Mounting Screws; Pair
Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models
Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...
Reproduction of the original style door frame weatherstripping designed for use on various GM full size models including 1967-68 Buick, Chevy, Cadillac, Pontiac,Oldsmobile Full Size passenger cars for 2 door hardtop or 2 door...
Reproduction quarter window U-shape rubber weatherstrip for 1967-68 Caprice or 1968 Impala Custom 2-door hardtop models and 1967-68 Impala convertible models. This seal attaches to the door jamb area under the quarter window...
Correct reproduction of the original U-shape rubber molded weatherstrip seal originally installed on 1969-70 Buick, Chevy, Pontiac, and Oldsmobile Full Size hardtop & convertible passenger car models. This seal attaches to...
Sealstrip Glass Setting Tape; 10 Foot Roll; 1/32" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1962-70 Buick, Chevy; Pontiac, Oldsmobile; Control Arm Bumper; Rubber; Each; Various Models
Reproduction of the original control arm bumper designed for use on various GM models. Each bumper is manufactured to factory specifications in the correct configuration and includes a built in stud ensuring a perfect fit....
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
Door, Vent, Quarter Glass; Sealstrip Glass Setting Tape;10 Foot Roll; 1/16" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1967-68 Impala, Wildcat, Delta 88; Roof Rail Weatherstrip Seal, 2-Door Fastback; Pair
Reproduction of the original roof rail weatherstrip designed for use on 1967-68 Impala 2 door Fastback, Wildcat, Le Sabre, and various GM models as listed below. This quality reproduction weatherstripping is manufactured in...
Correct reproduction of the original roof rail weatherstrips designed for use on 1967-68 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...
Sealstrip Glass Setting Tape ; 10 Foot Roll ; 3/64" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1941-76 Mohair Window Channel Liner ; 2-5/8" wide x 8" long
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...
Quality reproduction of the original weatherstripping designed for use on 1965-66 Impala, Caprice, Electra, Wildcat, Calais, DeVille, Bonneville, Catalina 4 door hardtop models. Each weatherstrip is manufactured with OEM type...
1977-2005 Buick, Chevy, Olds, Pontiac; Compartment Lid Rubber Bumper; Front or Rear; Each
Reproduction of the original rear compartment lid rubber stopper needed to prevent the rear compartment lid from slamming against the body. Each rubber bumper is manufactured in quality EPDM rubber that replicates the...
1982-98 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac; Door Jamb Switch Seal
Reproduction door jamb switch seal for the door jamb switch on a wide variety of GM models. Manufactured in rubber like the original, this accordian style seal prevent the elements from entering into the door jamb switch...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...
1961-79 GM; Transmission Control Cable Grommet; OER
OER® reproduction of the original GM transmission control cable grommet for all 1961-79 GM models. Designed to factory specifications in the correct configuration for a perfect fit and manufactured in rubber as original....
1941-76 Mohair Window Channel Liner ; 1-5/8" Wide x 8" Long x 1/16" Thick
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...