Electric Vacuum Pump Set For Power Brakes - Universal Fit
It takes 16" of Hg vacuum to properly activate your vehicle's power brake booster. Sometimes, big-cammed or supercharged engines don't create enough vacuum to operate the booster, making it more difficult to stop. This vacuum...
1978-87 Regal, 1978-88 GM A, G-Body; Rear Disc Brake Kit; Drilled/Slotted Rotors; Black Calipers
Convert your 1978-88 GM A or G-Body model to powerful rear disc brakes for performance, safety, and reliability ? all at a cost comparable to overhauling your old, inefficient drum brakes. This complete kit delivers improved...
Universal HydroBoost Unit; Short Pedal Rod Style
Our universal HydroBoost unit features the common 3-3/8" square bolt pattern and generates up to 1800psi of line pressure to the brake calipers. This unit is powered by hydraulic line pressure from the power steering pump...
1979-85 GM; Rear Caliper Set; Metric Style; With Emergency Brake; Loaded With D154 Brake Pads
Reproduction calipers based on the 1979-up factory GM-style metric calipers that accept either original GM or Lokar type emergency brake cables. Fluid inlets are tapped to accept 7/16-20 banjo fittings. Each caliper includes...
Reproduction single piston Metric calipers like those that were standard equipment on 1978-88 GM mid-size vehicles. Features a 2.375" single piston, shielded bottom inlet, and 5-1/2" mounting bolt spacing. The compact size...
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1965-77 GM; Disc, Disc Brake Combination Valve; with 4/Wheel Disc Brake Conversions; Various Models
If you need a new disc brake metering valve or prefer the cleaner, updated appearance of a modern brake combination valve for your 1955-57, 1967-1972 model, or require a replacement for a 1971-1977 application, this precision...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
Reproduction of the original style brake pedal pad for use with various 1973-2002 GM vehicles. Manufactured in quality EPDM rubber to factory specifications featuring the correct shape, size and horizontal pattern for a...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1974-78 Ford Mustang II; Caliper Bracket Set; Cast Iron; for Stock Height or 2" Drop Spindles; Pair
Our Mustang II caliper brackets are built from cast iron for superior strength. Designed to install on Stock or 2" drop spindles from a 1974-1978 Mustang II coupled with 1978 and newer GM calipers, sold separately. Will fit...
1982-92 Camaro, Firebird; Brake Pedal Pad, with Automatic Transmission
Reproduction of the original brake pedal pad for various Camaro and Firebird models with automatic transmission. The brake pedal pad is manufactured as original including the correct honeycomb style pattern. Will fit and...
Improve stopping power or replace the brake rotors on the rear of your disc brake equipped vehicle with these brand new 11" diameter performance brake rotors. Each vented rotor features dual 5 x 4.75" and 5x4.5" lug pattern...
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
This reproduction early style single bail master cylinder cover is designed for units with a 3 inch x 5-5/8 inch lid and brings a bright custom touch to your engine compartment. Manufactured from stamped steel and finished in...
1982-92 Camaro,1988-92 Firebird; Brake Pedal Pad, with Manual Transmission
Reproduction of the original brake pedal pad for various Camaro and Firebird models with manual transmission. The brake pedal pad is manufactured as original including the correct honeycomb style pattern. Will fit and...
Proportioning Valve Bracket; Bottom Mount; Chrome Plated
Universal fit proportioning valve/combination valve mounting brackets mount your combination valves either to the frame or directly under the master cylinder, providing access to lines and fittings. Each stamped steel bracket...
1967-84 Master Cylinder Cover; Single Bail; Chrome Plated; without Diaphragm;
This reproduction single bail master cylinder cover measures 4-7/8 inches x 2-3/8 inches and is manufactured from stamped steel for an authentic fit and feel. Finished in bright chrome plating, it delivers a clean, custom...
These brackets are designed for mounting aftermarket 4-bolt master cylinder/booster combinations to the firewall of almost any vehicle that has a flat area for mounting a booster. Universal fit for most aftermarket 7", 8",...
1984-91 Chevrolet, GMC Pickup; Rear Park Brake Cable; 2WD, 4WD; 1/2 Ton, 3/4 Ton
Reproduction rear parking brake cable for 1984-91 2WD and 4WD, Chevrolet and GMC 1/2 ton and 3/4 ton pickup models. This will replace a rusted or missing cable to properly operate the parking brake.
Universal Residual Pressure Valve; Blue; 2 psi
Residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...
1970-91 GM; Single Bail Chrome Master Cylinder Cover; 5-5/8" X 3"; With Bail and Diaphragm
Reproduction of the early model single bail 3" x 5-5/8" master cylinder cover. Add that extra dash of chrome to your engine compartment's appearance. Manufactured in stamped steel and finished in bright chrome plating. Comes...
9/16" & 1/2" lines for left side mount prop valve. Sold as a pair. Specifications: For use with 9/16" & 1/2" Ports Master Cylinders Use For Left Side Mounting Silver Zinc Plated Steel Lines
Reproduction style proportioning valve lines for use with various models. Measures 1/2" & 3/8" lines for most Ford dual reservoir master cylinders and 3/8" & 3/8" lines for bottom mount proportioning valve. Each line features...
1964-90 Buick, Chevrolet, Pontiac, Oldsmobile; Park Brake Pedal Pad ; Various Models; OER
Reproduction park brake pedal pad for various 1964-90 Buick, Chevrolet, Pontiac, and Oldsmobile models. Manufactured in quality EPDM rubber and replaces the original pad exactly. Features correct horizontal ribbed design with...
1969-87 GM; Park Brake Pedal Pad; Various Models; OER
Correct reproduction of the original style park brake pad designed for use on various 1969-81 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each park brake pad is manufactured in quality EPDM rubber to factory dimensions....
Universal HydroBoost Unit; Long Pedal Rod Style
Our universal HydroBoost unit features the common 3-3/8" square bolt pattern and generates up to 1800psi of line pressure to the brake calipers. This unit is powered by hydraulic line pressure from the power steering pump...
Brand new reproduction (not rebuilt) brake caliper that was factory-installed for many years on a wide variety of GM mid-size vehicles including the 1969-72 Chevelle, 1973-77 GM A-Body, 1969-81 Camaro, S-10 pickups, and more....
1982-92 Camaro, 1982-84 Firebird; Park Brake Lever Grip Handle; with Leather Option; Black
This OER reproduction leather wrapped park brake handle is designed to fit a wide range of 1982-1992 Camaro models and 1982-1984 Firebird models, offering an authentic upgrade in both appearance and feel. Each handle is...
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
1978-87 Regal, Monte Carlo, Cutlass, Grand Prix; Clutch & Brake Pedal Assembly; Various Models
Reproduction of the original clutch and brake pedal assembly designed for use with various GM applications including 1978-87 Pontiac Grand Prix, Chevrolet Monte Carlo, and Oldsmobile Cutlass. These perfectly constructed brake...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
These reproduction front disc brake backing plates are designed for 1978-1987 Buick Regal and 1981-1988 Chevrolet El Camino, Malibu, and Monte Carlo models equipped with single piston front disc brakes. Manufactured from...
Universal Frame Mount Manual Brake Pedal Assembly
Frame mount brake pedal assembly for power brake applications. Powder coated in black, each kit comes with pedal pad to complete the assembly. Includes black powder coated brake pedal rod, brake pedal pad and hardware. For...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1967-69 Rear Drum Backing Plate LH
Reproduction of the original rear brake backing plates for various Gm Models models with 9-1/2" rear drum brakes including Malibu, 442, Chevelle, GTO. Stamped to exact factory specifications featuring the correct thickness...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
These reproduction front disc brake backing plates are designed for 1971-1986 Chevrolet and GMC Truck C/K models and 1987-1991 R/V models. Manufactured to correct OE specifications, each plate provides the proper fit and...
Improve stopping power or replace the brake rotors on the rear of your disc brake equipped vehicle with these brand new 11" diameter performance brake rotors. Each drilled and slotted rotor features dual 5 x 4.75" and 5x4.5"...
3/8"-24 Brake Pedal Clevis; Zinc Plated
Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is zinc...
This correct double push type line clip is a factory style replacement for various GM models and is designed to secure multiple steel lines to the underside of the vehicle. Stamped to original dimensions, this clip can...
Improve stopping power or replace the brake rotors on the rear of your disc brake equipped vehicle with these brand new 11" diameter performance brake rotors. Each vented rotor features dual 5 x 4.75" and 5x4.5" lug pattern...
Brake Pedal Rod Extension; 4-3/4"; Zinc Plated; Universal Fit
Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod can be cut to your desired length if necessary. Rod measures 4-3/4"...
1978-2000 GM; Chrome Master Cylinder Cover; for 3-1/2" x 6" Cap
Enhance your engine compartment with this high quality chrome master cylinder cover designed to fit over the stock reservoir cap on many late model GM cars and trucks. Built to provide a clean, custom appearance, this slip...
Proportioning Valve Bracket; LH Mount; Chrome Plated; Universal Fitment
Universal fit bracket to mount the proportioning valve on the LH side of the master cylinder towrds the driver side fender. Each valve bracket is manufactured in quality stamped steel and chrome plated. Will fit most...
Universal fit GM style master cylinder push rod kit that includes the parts necessary to install on the 10 most common combinations. This 10-piece adjustable master cylinder push rod kit works with power and non-power...
These brackets are designed for mounting aftermarket 4-bolt master cylinder/booster combinations to the firewall of almost any vehicle that has a flat area for mounting a booster. Universal fit for most aftermarket 7", 8",...
These brackets are designed for mounting aftermarket 4-bolt master cylinder/booster combinations to the firewall of almost any vehicle that has a flat area for mounting a booster. Universal fit for most aftermarket 7", 8",...
1967-1991 GM; Master Cylinder Diaphragm; Various Models
This reproduction master cylinder cover diaphragm is designed for vehicles equipped with a Delco Moraine style master cylinder featuring a 3 inch by 5-3/4 inch cover. Manufactured to replicate the original in fit and...
1964-88 GM; Brake Pedal Pad Trim Plate; Automatic Trans; Stainless
Reproduction of the original brake pedal pad stainless steel trim plate designed for use with a variety of 1964-90 Buick, Chevrolet, Oldsmobile, and Pontiac models with automatic transmission. Each trim plate is manufactured...
Brake Pedal Clevis; Chrome Plated; 3/8"-24
Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is chrome...
Chevy, GM, Ford, Mopar; Proportioning Valve Bracket Bottom Mount; Zinc Plated;
Universal fit proportioning valve/combination valve mounting brackets mount your combination valves either to the frame or directly under the master cylinder, providing access to lines and fittings. Each stamped steel bracket...
Residual Pressure Valve; Red; 10 psi
Residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...