Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1963-72 Chevrolet; "572 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
"Objects In Mirror Are Losing " Exterior Side Mirror Decal; 4" x 5/8"
This is a crack up and a must have. Decal reads "OBJECTS IN MIRROR ARE LOSING".
1982-90 Chevrolet Camaro; Tail Lamp Applique; with Horizontal Center Accent Stripe; RH
Authentic reproduction of the original tail lamp filler panel for 1982-90 Z28, LT, Sport, and standard Camaro models as listed. Each filler is manufactured in injection molded ABS and painted black with the correct original...
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1985-87 Camaro Z28 Rocker Panel Emblem ; Tri-Color Silver; Each; GM Licensed
Bring back the original appearance of your Camaro by replacing the faded OE emblems! Reproduction of the original Z28 rocker panel emblems are manufactured in quality injection molded ABS featuring a clear insert that...
1985-87 Camaro; "Z28" Rocker Panel Emblem; Tri-Color Dark Red/Black; GM Licensed
Bring back the original appearance of your Camaro by replacing the faded OE emblems! Reproduction of the original Z28 rocker panel emblems are manufactured in quality injection molded ABS featuring a clear insert that...
1985-87 Camaro Z28; Rocker Panel Emblem ; Tri-Color Gray/Black; Each; GM Licensed
Bring back the original appearance of your Camaro by replacing the faded OE emblems! Reproduction of the original Z28 rocker panel emblems are manufactured in quality injection molded ABS featuring a clear insert that...
1985-87 Camaro;"Z28" Rear Panel Emblem; Tri-Color Red; Each; GM Licensed
OER® reproduction of the original rear panel emblem designed for use on 1985-1987 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...
1985-87 Camaro;"Z28" Rear Panel Emblem; Tri-Color Blue Metallic; Each; GM Licensed
OER® reproduction of the original rear panel emblem designed for use on 1986-1987 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...
1985-87 Camaro IROC-Z Wheel Center Cap With Emblem; Red
Reproduction of the center cap emblem that snaps into place in the center of the 1985-87 IROC-Z wheels. Manufactured using injection molded plastic, this black emblem has a Mylar domed center emblem with a clear polyester...
1985-90 Camaro Z28; Wheel Center Cap Decal; Black Z28 Logo; 2 1/2" Diameter; Each
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a black Z28 logo on a silver background. Each emblem measures 2-1/2"...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
1986-92 Camaro; Header Panel Emblem; with Hardware; GM Licensed
OER® reproduction header panel emblem for 1986-87 Camaro IROC, 1987 Camaro RS & 1988-92 Camaro standard models. Manufactured to factory specifications in injection molded ABS featuring red, white and blue stripes with...
1985-87 Camaro; "Z28" Rocker Panel Emblem; Dark Gold; Each; GM Licensed
Bring back the original appearance of your Camaro by replacing the faded OE emblems! Reproduction of the original Z28 rocker panel emblems are manufactured in quality injection molded ABS featuring a clear insert that...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
1985-87 Camaro;"Z28" Rear Panel Emblem; Tri-Color Gray; Each; GM Licensed
OER® reproduction of the original rear panel emblem designed for use on 1985-1987 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...
1986-87 Camaro; "Z28" Rocker Panel Emblem; Dark Blue Metallic; Each; GM Licensed
Bring back the original appearance of your Camaro by replacing the faded OE emblems! Reproduction of the original Z28 rocker panel emblems are manufactured in quality injection molded ABS featuring a clear insert that...
1985-87 Camaro;"Z28" Rear Panel Emblem; Tri-Color Dark Gold; Each; GM Licensed
OER® reproduction of the original rear panel emblem designed for use on 1985-87 Camaro Z28 models. Each emblem is manufactured to factory specifications in clear lens applique featuring Z28 lettering with the Chevrolet...
1985-90 Camaro IROC Z; Wheel Center Cap Decal; Silver Logo; 2 1/2" Diameter; Each
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a silver IROC-Z logo on a black background. Each emblem measures...
1985-90 Camaro IROC Z; Wheel Center Cap Decal; Silver with Black Logo; 2 1/2" Diameter; Each
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a black IROC-Z logo on a silver background. Each emblem measures...
1985-90 Camaro Z28; Wheel Center Cap Decal; Black with Silver Logo; 2 1/2" Diameter; Each
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a silver Z28 logo on a black background. Each emblem measures 2-1/2"...
1967-2002 Camaro; Wheel Center Cap Decal; Chrome Camaro Logo; 2 1/2" Diameter
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a chrome Camaro logo on a black background. Each emblem measures...
1967-2002 Camaro; Wheel Center Cap Decal; Silver with Black Logo; 2 1/2" Diameter; Each
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a black Camaro logo on a silver background. Each emblem measures...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
1983-1988 Chevrolet; "Chevrolet" Wheel Center Cap Emblem; with N90 Option; Each
Reproduction wheel center cap emblem for various 1983-88 Chevrolet models originally equipped with the N90 wheel option. Each emblem is a correct style replacement to refresh the factory appearance. Measures 2-1/4" in...