1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green
This reproduction nylon molding clip will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
1980-87 GM; Molding Clip; For Rear Window Molding; Nylon; 7/8" X 1-1/5"; White; 24 pcs
Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green; 24 pcs
This reproduction nylon molding clip set will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
1980-87 GM; Molding Clip; Back Window; Nylon; 7/8" X 1-1/5"; White
Reproduction back window glass molding installation clip for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding. This clip...
1969-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...