Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1981-87 Chevrolet Truck; Scottsdale 20; Front Fender Emblem ; Each; GM Licensed
OER reproduction of the original "Scottsdale 20" emblem that mounts to the front fender of a 1981-86 Chevrolet C20/K20 OR 1987-88 R20/V20 pickup or Suburban. This was a high end trim option in 1981-87. Each emblem is...
1983-88 Chevy Pickup, Blazer, Suburban,1983-91 Van; Bow Tie Grill Emblem; GM Licensed
Reproduction of the original Bow Tie grill emblem for 1983-86 C/K and 1987-88 R/V pickup, 1983-88 Chevy Blazer, Suburban, crew cab and 1983-91 Chevy van models. Manufactured to factory specifications featuring chrome plating...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1981-91 Chevrolet Pickup, Blazer, Suburban; Hood Ornament Emblem; with Hardware; GM Licensed
Reproduction hood ornament emblem for 1981-86 Chevrolet C/K and 1987-91 R/V pickup trucks, as well as 1981-91 Chevrolet Blazer, and Suburban models. Each hood emblem is manufactured to correct factory specifications featuring...
Reproduction header panel/hood ornament for 1981-86 C/K and 1987-91 R/V Chevrolet and GMC truck and SUV models with a 6.2 litre diesel. This is an exact reproduction that is spring loaded and mounts to the hood. Replaces GM#...
1981-87 Chevy Blazer, Pickup, Suburban; SILVERADO 20 Front Fender Emblem ; Each; GM Licensed
OER reproduction of the "Silverado 20" emblem that mounts to the front fender of a 1981-88 Chevrolet C20 pickup. This was a high end trim option in 1981-88. Original emblems are obsolete and extremely hard-to-find. Each...
1981-87 Chevrolet Truck; CUSTOM DELUXE 20; Front Fender Emblem
OER reproduction of the "CUSTOM DELUXE 20" emblem that mounts to the front fender of a 1981-87 Chevrolet C20 pickup. Each emblem is injection molded ABS as original, chrome plated, and painted with correct colored accents....
1975-88 Chevrolet Suburban, "Suburban" Rear Barn Door Emblem; with Hardware; Each; GM Licensed
Reproduction rear barn door emblem for 1975-86 C/K and 1987-88 R/V Suburban models with barn door style rear cargo doors. Each emblem is designed and manufactured to replicate the original for an authentic appearance and fit....
1981-87 Chevrolet; Silverado; Dash Emblem; GM Licensed
Reproduction "Silverado" dash emblem for 1981-87 Chevrolet Silverado models. Each emblem is designed to replicate the original exactly with chrome lettering and the Bow Tie emblem. Includes speed nuts for easy installation.
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
Injection-molded plastic reproduction emblem spacer that installs behind the Bow Tie emblem on some Chevrolet truck models. The spacer fills the void between the Bow Tie emblem and the grill center molding providing a clean...
1981-86 C/K, 1987-91 R/V Chevrolet and GMC Truck; Hood Emblem Gasket
Chevrolet Truck Hood Ornament Emblem Gasket Only. This gasket fits between the emblem and the hood on select Chevrolet and GMC trucks. If your vehicle has the optional hood ornament, this part is essential to ensure a secure...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
1981-91 Chevrolet; Pickup, Blazer; "Chevrolet" Tailgate Emblem
Reproduction of the original tailgate emblem designed for use with 1981-87 Chevrolet C/K pickup fleetside models, and 1981-91 Chevrolet R/V Series fleetside, Blazer, and Suburban models. Manufactured in injection molded...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...