1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green
This reproduction nylon molding clip will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
1981-91 Chevy, GMC Pickup, Fleetside, Blazer, Suburban; Rear Tailgate Band Molding; without Emblem
Reproduction rear tailgate molding for 1981-91 Chevrolet and GMC pickup models with the deluxe exterior trim package. Each molding is manufactured in quality stamped aluminum, replicating the original in design, fitment, and...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
Reproduction of the original cab molding set designed for use with 1981-1986 Chevrolet C/K, and 1987-88 R/V pickup truck models. Each molding is manufactured in quality stamped aluminum to exact factory specifications...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1981-91 Chevy, GMC; Pickup Fleetside, Blazer, Jimmy; Chrome Body Side Molding; 25" Foot Roll
Original style body side molding designed for use on 1981-91 Chevrolet and GMC pickup truck, Suburban, Blazer, and Jimmy models. Manufactured like originals but not pre-cut, this molding set features the correct chrome finish...
1980-90 Impala, Caprice; Front Wheel Opening Molding; 2 Door & 4 Door; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1980-85 Impala and 1986-90 Caprice models. Each molding is stamped in quality aluminum with correct countours for an authentic appearance and original...
OER® Authorized reproduction of the original door edge molding designed for use on 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Each stainless steel molding is stamped to exact factory...
1975-90 GM, 1977-79 Nova; GM X-Body; Glass Molding Clip Set; Nylon; 14 Piece Set
Replacement style window glass molding installation clips for 1977-1979 Nova and GM X-body. Fits a wide variety of applications on other GM models, too. Each clip is designed to replicate OE style clips providing a snug fit...
1975-90 GM, 1977-79 Nova / X-Body; Windshield Molding Clip Set; Nylon Type; 14 Piece Set
Replacement style front window glass molding installation clips for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
1980-87 GM; Molding Clip; For Rear Window Molding; Nylon; 7/8" X 1-1/5"; White; 24 pcs
Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1981-91 Blazer, Jimmy; Rear Tailgate Band Molding; for Models with Removable Hardtop
Reproduction rear tailgate molding without emblem for 1981-91 Chevrolet and GMC pickup models with removeable hardtop. Each molding is manufactured in quality stamped alumimum replicating the original in design, fitment and...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
OER® Authorized reproduction of the original front wheel opening molding for 1981-86 C/K-Series and 1987-91 R/V-Series Chevrolet and GMC pickup and SUV models. Each molding is manufactured in stamped aluminum to factory...
OER® Authorized reproduction of the original front wheel opening molding for 1981-86 C/K-Series and 1987-91 R/V-Series Chevrolet and GMC pickup and SUV models. Each molding is manufactured in stamped aluminum to factory...
1980-90 Impala, Caprice, Cutlass, Lower Side Molding Clip; Each
Reproduction of the original lower side molding clip designed for use with various 1980-90 Caprice, Cutlass, Impala, and Parisienne models as listed. Each clips ia manufactured in quality injection molded nyton replicating...
OER® Authorized reproduction of the original door edge molding designed for use on 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Each stainless steel molding is stamped to exact factory...
Reproduction front wheel opening molding, smooth style, without black stripe, for 1989-91 Chevrolet and GMC SUV models. Each molding is stamped to original factory specifications featuring correct contours and a bright finish...
Reproduction rear wheel opening molding, smooth style, without black stripe, for 1989-91 Chevrolet and GMC SUV models. Each molding is stamped to original factory specifications featuring correct contours and a bright finish...
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green; 24 pcs
This reproduction nylon molding clip set will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1980-87 GM; Molding Clip; Back Window; Nylon; 7/8" X 1-1/5"; White
Reproduction back window glass molding installation clip for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding. This clip...
1969-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
1962-87 GM; Wheel Well Molding Screw Set; Phillips; 8-18 x 3/8" L; 3/8" Head; Silver; 36 Piece Set
Reproduction of the original style screws designed for use with various GM models. This screw set can be used for all four wheel opening moldings. Replace your missing or worn out wheel well molding screws with this 36 piece...
OER® Authorized reproduction of the original rear wheel opening molding for 1973-86 Chevrolet and GMC C/K and 1987-91 R/V pickup and SUV models. Each molding is manufactured in stamped aluminum to factory specifications...
1980-90 Impala, Caprice; Rear Wheel Opening Molding; 2 Door & 4 Door; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1980-85 Impala and 1986-90 Caprice models. Each molding is stamped in quality aluminum with correct countours for an authentic appearance and original...
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1981-91 Blazer/Jimmy/Suburban; Wheel Opening Molding; Front; Smooth Style; RH Passenger Side
Reproduction front wheel opening molding, smooth style, without black stripe, for 1989-91 Chevrolet and GMC SUV models. Each molding is stamped to original factory specifications featuring correct contours and a bright finish...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
OER® Authorized reproduction of the original rear wheel opening molding for 1973-86 Chevrolet and GMC C/K and 1987-91 R/V pickup and SUV models. Each molding is manufactured in stamped aluminum to factory specifications...
1963-91 GM, Mopar; Chrome Windshield Seal Lockstrip; 16" 10" Long x 1/2" Wide
Superb quality windshield lockstrip that replaces the old and worn out originals on various GM and Mopar vehicles. Produced with high grade rubber for long lasting dependability, each lock strip is designed to replicate the...
1980-90 Impala, Caprice; Front Wheel Opening Molding; 2 Door & 4 Door; RH Passenger Side
Reproduction of the original wheel opening molding designed for use on 1980-85 Impala and 1986-90 Caprice models. Each molding is stamped in quality aluminum with correct countours for an authentic appearance and original...
1980-90 Impala, Caprice; Rear Wheel Opening Molding; 2 Door & 4 Door; RH Passenger Side
Reproduction of the original wheel opening molding designed for use on 1980-85 Impala and 1986-90 Caprice models. Each molding is stamped in quality aluminum with correct countours for an authentic appearance and original...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
Reproduction rear wheel opening molding, smooth style, without black stripe, for 1989-91 Chevrolet and GMC SUV models. Each molding is stamped to original factory specifications featuring correct contours and a bright finish...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon, 10 Piece Set
Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...
Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-11/32" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...