1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green
This reproduction nylon molding clip will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
1981-91 Chevy, GMC Pickup, Fleetside, Blazer, Suburban; Rear Tailgate Band Molding; without Emblem
Reproduction rear tailgate molding for 1981-91 Chevrolet and GMC pickup models with the deluxe exterior trim package. Each molding is manufactured in quality stamped aluminum, replicating the original in design, fitment, and...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
Reproduction of the original cab molding set designed for use with 1981-1986 Chevrolet C/K, and 1987-88 R/V pickup truck models. Each molding is manufactured in quality stamped aluminum to exact factory specifications...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1981-91 Chevy, GMC; Pickup Fleetside, Blazer, Jimmy; Chrome Body Side Molding; 25" Foot Roll
Original style body side molding designed for use on 1981-91 Chevrolet and GMC pickup truck, Suburban, Blazer, and Jimmy models. Manufactured like originals but not pre-cut, this molding set features the correct chrome finish...
1982-84 Camaro Z28; Front Grill; LH Driver Side
Reproduction of the original front grill designed for use with 1982-84 Camaro Z28 models. Each grill is manufactured in injection molded ABS to original factory specifications. Includes 3 hols to mount grill. Hardware not...
1974-86 Chevy, GMC C/K Pickup, 1987-91 R/V; Drip Rail Retainer and Molding Kit; 4 Piece Set
Reproduction roof drip moldings and retainers for various Chevrolet and GMC C/K and R/V truck models. The drip rails on the cab of the 1973 and later pickup models initially began as optional equipment and only later (after a...
1980-90 Impala, Caprice; Front Wheel Opening Molding; 2 Door & 4 Door; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1980-85 Impala and 1986-90 Caprice models. Each molding is stamped in quality aluminum with correct countours for an authentic appearance and original...
1983-88 Chevrolet, GMC Truck; Grill Side Molding; LH
OER® Authorized reproduction of the original grill side molding designed for use on 1983-86 Chevrolet and GMC Pickup Trucks and 1983-88 Blazer, Jimmy and Suburban models. This quality reproduction is manufactured in...
1983-88 Chevrolet, GMC Truck; Upper Grill Molding ; Upper
Reproduction upper grille molding for 1983-86 Chevrolet and GMC Pickup Trucks and 1983-88 Blazer, Jimmy and Suburban models. This quality reproduction is manufactured in stamped stainless steel to OE factory specifications...
1983-88 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Lower Front Grill Molding
Reproduction lower grill molding for 1983-86 Chevrolet and GMC Pickup Trucks and 1983-88 Blazer, Jimmy and Suburban models. This quality reproduction is manufactured in stamped stainless steel to OE factory specifications and...
1981-85 Chevrolet Caprice; Front Grill; Chrome Argent Silver
Quality reproduction of the original front grill assembly for use with 1981-85 Chevrolet Caprice models. Each grill is manufactured to original factory specifications replicating the original in appearance and fitment....
1983-84 Chevy Pickup, Blazer, Suburban; Front Grill Emblem Delete Panel; Dual Headlamps; Dark Gray
OER® Authorized reproduction of the plastic grill for 1983-84 Chevrolet pickup, Blazer or Suburban models. Designed as a service replacement for the original grill, this reproduction does not feature a mounting area for a...
1974-91 Chevrolet, GMC Pickup Truck; Roof Rail Molding; Stainless Steel; LH Drivers Side
Reproduction roof drip molding for 1974-1986 Chevrolet and GMC C/K pickup trucks and 1987-91 R/V truck models. Each molding is stamped to replicate the original design and configuration using quality stainless steel. This...
1974-91 Chevrolet, GMC Pickup; Roof Drip Rail Molding Retainer; Black; RH Passenger Side
Reproduction roof drip rail molding retainer for 1974-1986 Chevrolet, GMC pickup trucks and 1987-91 R/V pickup truck models. Each retainer is stamped to replicate the original design and configuration using quality steel....
OER® Authorized reproduction of the original door edge molding designed for use on 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Each stainless steel molding is stamped to exact factory...
1983 All Makes All Models Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
1975-90 GM, 1977-79 Nova; GM X-Body; Glass Molding Clip Set; Nylon; 14 Piece Set
Replacement style window glass molding installation clips for 1977-1979 Nova and GM X-body. Fits a wide variety of applications on other GM models, too. Each clip is designed to replicate OE style clips providing a snug fit...
1975-90 GM, 1977-79 Nova / X-Body; Windshield Molding Clip Set; Nylon Type; 14 Piece Set
Replacement style front window glass molding installation clips for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
1980-87 GM; Molding Clip; For Rear Window Molding; Nylon; 7/8" X 1-1/5"; White; 24 pcs
Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1981-91 Blazer, Jimmy; Rear Tailgate Band Molding; for Models with Removable Hardtop
Reproduction rear tailgate molding without emblem for 1981-91 Chevrolet and GMC pickup models with removeable hardtop. Each molding is manufactured in quality stamped alumimum replicating the original in design, fitment and...
Reproduction of the original rear tailgate filler band panel molding for 1981-86 Chevrolet C/K and 1987-88 Chevrolet R/V pickup models. Each reproduction tailgate band is manufactured to correct factory specifications and...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1982-84 Camaro Z28; Front Grill; RH Passenger Side
Reproduction of the original front grill designed for use with 1982-84 Camaro Z28 models. Each grill is manufactured in injection molded ABS to original factory specifications. Includes 3 hols to mount grill. Hardware not...
1983-84 Chevy Pickup, Blazer Suburban; Front Grill; w/Emblem Pad; Single Headlamp; w/o Molding Hole
Reproduction plastic grill for 1983-84 Chevrolet C/K Pickup, Blazer & Suburban models. Each grill is manufactured to original specifications with the correct center grill emblem, and will bolt in using factory mounting...
OER® Authorized reproduction of the original front wheel opening molding for 1981-86 C/K-Series and 1987-91 R/V-Series Chevrolet and GMC pickup and SUV models. Each molding is manufactured in stamped aluminum to factory...
OER® Authorized reproduction of the original front wheel opening molding for 1981-86 C/K-Series and 1987-91 R/V-Series Chevrolet and GMC pickup and SUV models. Each molding is manufactured in stamped aluminum to factory...
1982-87 El Camino, Caballero; 1982-83 Malibu; Grill; Chrome/Argent Silver
Reproduction grill for 1982-87 El Camino and Caballero, and 1982-83 Malibu models. Manufactured in injection-molded ABS to factory specifications, this grill replicates the original design with the correct chrome and argent...
Reproduction Chevrolet and GMC perimeter grill molding set for 1983-86 C/K, and 1987-88 R/V Series pickup, Blazer, Jimmy, and Suburban. This quality polished stainless steel reproduction set is manufactured to factory...
1983-88 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Grill Side Molding; RH Passenger Side
Reproduction grill side molding for 1983-86 Chevrolet and GMC Pickup Trucks and 1983-88 Blazer, Jimmy and Suburban models. This quality reproduction is manufactured in stamped stainless steel to OE factory specifications and...
1983-84 Chevy Pickup, Suburban, Blazer; Front Grill; Single Headlamp; Argent Silver
Reproduction of the front grill for 1983-84 Chevrolet Blazer and Suburban models with single headlamps. Grills are manufactured in injection-molded ABS replicating the original in design, appearance, and fitment. This...
1974-91 Chevrolet, GMC Pickup; Roof Drip Rail Molding; Stainless Steel; RH Passenger Side
Reproduction roof drip molding for 1974-1986 Chevrolet and GMC C/K pickup trucks and 1987-91 R/V truck models. Each molding is stamped to replicate the original design and configuration using quality stainless steel. This...
1973-86 Chevy, GMC C/K, 1987-91 R/V; Stainless Steel Drip Rail Molding Set; 2 Piece Set
Reproduction of the original stainless steel roof drip molding set for 1974-1986 C/K truck and 1987-91 R/V truck models. Each molding set is stamped to replicate the original design and configuration using quality stainless...
1973-91 Chevy, GMC Pickup Truck; Roof Drip Molding Retainer Kit; Stampled Steel; 2 Piece Set
Reproduction of the original black roof drip rail molding retainer kit for 1974-1986 Chevrolet C/K truck and 1987-91 R/V truck models. Each retainer kit is stamped to replicate the original design and configuration using...
1983-86 Monte Carlo; Grill; Chrome/Argent Silver; All Models Except SS & LS
Reproduction grill for 1983-86 Monte Carlo models, all except SS and LS. Manufactured in injection-molded ABS to factory specifications, this grill replicates the original design with the correct chrome and argent silver...
1983-88 Monte Carlo; Headlight Opening Filler Panels; Stainless Steel; LH and RH
Custom stainless steel headlight opening filler panels for 1983-88 Monte Carlo SS models. Designed as a custom upgrade, these panels install between the headlamp bezels and grill area to provide a clean, finished look....
1974-91 Chevrolet, GMC Pickup; Roof Drip Rail Molding Retainer; Black; LH Driver Side
Reproduction roof drip rail molding retainer for 1974-1986 Chevrolet, GMC pickup trucks and 1987-91 Chevy / GMC R/V pickup truck models. Each retainer is stamped to replicate the original design and configuration using...
1980-90 Impala, Caprice, Cutlass, Lower Side Molding Clip; Each
Reproduction of the original lower side molding clip designed for use with various 1980-90 Caprice, Cutlass, Impala, and Parisienne models as listed. Each clips ia manufactured in quality injection molded nyton replicating...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
OER® Authorized reproduction of the original door edge molding designed for use on 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Each stainless steel molding is stamped to exact factory...
Reproduction front wheel opening molding, smooth style, without black stripe, for 1989-91 Chevrolet and GMC SUV models. Each molding is stamped to original factory specifications featuring correct contours and a bright finish...
Reproduction rear wheel opening molding, smooth style, without black stripe, for 1989-91 Chevrolet and GMC SUV models. Each molding is stamped to original factory specifications featuring correct contours and a bright finish...
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green; 24 pcs
This reproduction nylon molding clip set will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1980-87 GM; Molding Clip; Back Window; Nylon; 7/8" X 1-1/5"; White
Reproduction back window glass molding installation clip for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding. This clip...
1969-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....