Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
1982-91 Chevy, GMC Suburban; Zinc Coated Fuel Tank; Gas or Diesel; 40 Gallon
Correct reproduction of the original fuel tank designed for with 1982-91 Chevrolet and GMC Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and corrosion...
1982-87 Blazer, Jimmy, Suburban; Fuel Tank; Zinc Coated; Gas/Diesel; 25 Gallon
Correct reproduction of the original fuel tank designed for with 1973-81 Chevrolet and GMC Blazer, Jimmy, and Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1982-91 Blazer, Jimmy, Suburban; Fuel Filler Hose
Reproduction fuel tank filler hose for 1982-91 Chevrolet and GMC Blazer, Jimmy, and Suburban models. Chevrolet Applications: 1982-1991 Chevrolet Blazer 1982-1991 Chevrolet Suburban GMC Applications: 1982-1991 GMC Jimmy...
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet Blazer, Suburban, and, GMC Jimmy, Suburban models with 31 gallon fuel tank. Each strap is manufactured in quality stamped steel,...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
Reproduction of the original OE rubber bumper for use with 1979-86 Chevrolet and GMC C/K pickup truck models, and 1987-91 Chevrolet and GMC R/V models. Also fits other areas of the vehicle including the heat exhaust shield,...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1982-91 Blazer, Jimmy, Suburban; Zinc Coated Fuel Tank; 31 Gallon
This high quality replacement fuel tank for 1982-91 Jimmy, Blazer, and Suburban models measures 28-3/4" x 28-1/8" x 12-3/4" with a 1-5/8" I.D. fuel filler neck is manufactured in zinc coated steel to replace the original...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1982-91 Chevy Blazer, GMC Jimmy, Suburban; Fuel Filler Neck; Unleaded Gasoline Models
Reproduction fuel tank filler neck for 1982-91 unleaded gasoline powered Chevrolet and GMC SUV Models including Blazer, Jimmy, Suburban. Filler necks are manufactured using heavy duty steel replicating the original design,...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1987 Chevrolet and GMC pickup truck models with 25 gallon rear mounted fuel tank. Each strap is manufactured in quality stamped steel,...
1974-91 Chevrolet, GMC Suburban; Fuel Tank Mounting Straps; with 40 Gallon Tank; Pair
Reproduction of the original fuel tank mounting straps designed for use with 1974-1991 Chevrolet, GMC Suburban models with 40 gallon fuel tank. Each strap is manufactured in quality galvanized stamped steel. If you are...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1974-91 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Accelerator Pedal Pad
Reproduction pedal for 1974-86 C/K and 1987-91 R/V Chevrolet and GMC models. Each accelerator pad is manufactured in injection molded ABS that replicates the original in fit and design. Features correct horizontal ribbed...
1977-91 Chevrolet, GMC Blazer, Jimmy, Suburban; Fuel Tank Vent Hose; 5/8" ID x 18" Long
5/8" ID x 18" long fuel tank vent hose for 1977-91 Chevrolet and GMC Blazer, Jimmy, and Suburban models with late style 5/8" diameter vent tube. {fitment}
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}