1986-87 El Camino, Caballero; Door Shell; LH
Reproduction LH door shell for 1986-87 Chevrolet El Camino and GMC Caballero models. Manufactured in stamped steel to factory specifications, this door shell replicates the original design for proper fit, strength, and OE...
1978-81 El Camino, Caballero, Malibu; Fender; LH
Reproduction LH fender for 1978-81 Chevrolet El Camino, GMC Caballero, and Chevrolet Malibu models. Manufactured in stamped steel to factory specifications, this fender replicates the original GM design for proper fit,...
1978-87 El Camino, Caballero; Bed Side Panel; Inner; LH
Reproduction LH inner bed side panel for 1978-87 Chevrolet El Camino and GMC Caballero models. Manufactured in stamped steel to factory specifications, this panel replicates the original inner bed side for proper fit and OE...
1978-87 El Camino, Caballero; Front Bed Panel
Reproduction front bed panel for 1978-87 Chevrolet El Camino and GMC Caballero models. Manufactured in stamped steel to factory specifications, this panel replicates the original design for proper fit, strength, and OE...
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Skin; LH
Reproduction LH door skin for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door skin replicates the original...
1978-87 El Camino, Caballero; Lower Rear Quarter Patch Panel; RH
This patch panel replaces the lower section of the rear quarter panel behind the rear wheel. These patch panels are a great way to replace rusted out areas without purchasing an entire quarter panel. Measures approximately...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"
Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...
Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Shell; RH
Reproduction RH door shell for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door shell replicates the original...
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Shell; LH
Reproduction LH door shell for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door shell replicates the original...
1978-83 Malibu, 1978-87 El Camino; Cowl Induction Hood; Steel; 2" Rise
Add a high-performance appearance to your 1978-83 Malibu 1978-87 El Camino or Caballero with this cowl induction performance steel hood. Developed for the enthusiast who's seeking a high performance look, this steel cowl hood...
1978-83 Malibu, 1978-87 El Camino; Cowl Induction Hood; 2" Tall; Steel
Replacement steel 2" tall cowl induction hood for 1978-83 Malibu and 1978-87 El Camino models. Each hood panel is manufactured in stamped steel to factory specifications featuring correct contours and underhood bracing. This...
1978-81 El Camino, Caballero, Malibu; Fender; RH
Reproduction RH fender for 1978-81 Chevrolet El Camino, GMC Caballero, and Chevrolet Malibu models. Manufactured in stamped steel to factory specifications, this fender replicates the original GM design for proper fit,...
1978-87 El Camino, Caballero; Bed Side Panel; Inner; RH
Reproduction RH inner bed side panel for 1978-87 Chevrolet El Camino and GMC Caballero models. Manufactured in stamped steel to factory specifications, this panel replicates the original inner bed side for proper fit and OE...
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Skin; RH
Reproduction RH door skin for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door skin replicates the original...
1978-87 El Camino, Caballero; Frame Rail; Rear Section; LH
Reproduction LH rear frame rail section for 1978-87 El Camino and Caballero models. Each frame rail section is manufactured from quality stamped steel to factory specifications and replicates the original design for proper...
1978-87 El Camino, Caballero; Frame Rail; Rear Section; RH
Reproduction RH rear frame rail section for 1978-87 El Camino and Caballero models. Each frame rail section is manufactured from quality stamped steel to factory specifications and replicates the original design for proper...
1978-87 El Camino, Caballero; Lower Rear Quarter Patch Panel; LH
This patch panel replaces the lower section of the rear quarter panel behind the rear wheel. These patch panels are a great way to replace rusted out areas without purchasing an entire quarter panel. Measures approximately...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"
Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
OER® Professional Grade; Black Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER Professional Grade; Weld-Thru Galvanizing Spray Coating; Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz)
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). Perfect for...
OER® Gray Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Gloss Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Flat Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Gray High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade Gray Weld-Thru Galvanizing Spray Coating Case of 6 - 16 Oz Aerosol Cans
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Perfect for application on the inside of newly installed panels...
OER® Dark Gray High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® High Solids Stainless Steel Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER Professional Grade Red Oxide Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 17...
OER® Gloss Black High Solids Detail Coating 16oz Net Weight
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Green Zinc Phosphate Primer; 16 Oz. Aerosol Can (Net Wt 12 Oz)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER® Professional Grade; Red Oxide High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Red Oxide Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade; Gray Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 15 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 15...
1978-88 Regal, GM G-Body; Lower A Pillar; LH Driver Side
Reproduction lower A pillar repair panel for various 1978-88 G-Body models. Manufactured to factory specifications for proper fitment and appearance. Comes EDP coated for rust prevention. Replaces the often rusted out lower...
OER® Professional Grade Green Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Professional Grade Yellow Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Gray Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Red Oxide Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Wrinkle Finish Paint Case of 6 - 16 Oz Aerosol Cans
Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...
OER® Aluminum High Solids Detail Coating Case of 6- 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® High Solids Stainless Steel Detail Coating 16 Oz Net Weight Aerosol Can
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Yellow Zinc Phosphate Primer; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER High Solids Coating Aerosol; Aluminum; 20 Oz Aerosol Can (Net Wt. 16 Oz.)
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...
Ford, Lincoln, Mercury; Floor Pan Metal Plug; Each; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Can be used as a...
Nylon Retainer Clip; Push-In; 11/16" Head Diameter; 5/16" Stem Diameter; 13/16" Stem Length; Black
Black nylon retaing clip that pushes into a 5/16" hole to install and secure various components OEM Part Number Cross Reference: GM: 11569768, 15958694, 1605396 Chrysler: 6030441 Ford: 388577S, W705589-S300 Specifications:...
OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
OER® Rubberized Undercoating Case of 6 - 20 Oz Aerosol Can
This OER® black rubberized undercoating is for use on automotive under surfaces. Sprays evenly, dries completely to a smooth consistency and can be top-coated with any type of automotive finish. Benefits: Prevents rust...
OER High Solids Detail Coating; Dark Gray; 20 Oz Aerosol Can (Net Wt. 16 Oz.)
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...
Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER
After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...
OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...
OER Gray and White Trunk Refinishing Kit with Standard Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....
OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
OER High Solids Coating Aerosol; Flat Black; 20 Oz Aerosol Can (Net Wt. 16 Oz.)
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...
OER® Rubberized Undercoating; 20 Oz Aerosol Can (Net Wt. 18 Oz.)
This OER® black rubberized undercoating is for use on automotive under surfaces. Sprays evenly, dries completely to a smooth consistency and can be top-coated with any type of automotive finish. Comes in a 20 Oz. Aerosol...
Black OER® Wrinkle Finish Paint; 16 Oz. Aerosol Can (Net Wt. 12 Oz.)
Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...
OER Underhood Detail Paint; Dark Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Underhood Detail Paint is a durable underhood coating used for detailing underhood items like hood hinges, safety and hood latch assembly, carburetors, pulleys, accelerator and transmission linkage, nuts, bolts,...