Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1963-72 Chevrolet; "572 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1981-86 Chevrolet Monte Carlo; Header Panel Emblem
Replacement die-cast header panel ornament emblem for 1981-86 Chevrolet Monte Carlo models. This is the spring loaded ornament that mounts on the header panel. It has a red crest with chrome helmet black background and chrome...
1973-88 Chevrolet Monte Carlo; Crest Emblem; Tail Lamp
Replacement tail lamp shield crest emblem for 1973-88 Chevrolet Monte Carlo models. This is the red crest with chrome helmet with chrome border and black background trim. Sold individually.
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1978-90 Door Sill Plate Emblem; Body By Fisher; Each
Correct reproduction "B ody by Fisher" door opening sill plate emblem for various 1978-90 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each emblem is correctly stamped in aluminum material to exact specifications...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...