Electric Vacuum Pump Set For Power Brakes - Universal Fit
It takes 16" of Hg vacuum to properly activate your vehicle's power brake booster. Sometimes, big-cammed or supercharged engines don't create enough vacuum to operate the booster, making it more difficult to stop. This vacuum...
Universal HydroBoost Unit; Short Pedal Rod Style
Our universal HydroBoost unit features the common 3-3/8" square bolt pattern and generates up to 1800psi of line pressure to the brake calipers. This unit is powered by hydraulic line pressure from the power steering pump...
1979-85 GM; Rear Caliper Set; Metric Style; With Emergency Brake; Loaded With D154 Brake Pads
Reproduction calipers based on the 1979-up factory GM-style metric calipers that accept either original GM or Lokar type emergency brake cables. Fluid inlets are tapped to accept 7/16-20 banjo fittings. Each caliper includes...
Reproduction single piston Metric calipers like those that were standard equipment on 1978-88 GM mid-size vehicles. Features a 2.375" single piston, shielded bottom inlet, and 5-1/2" mounting bolt spacing. The compact size...
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1965-77 GM; Disc, Disc Brake Combination Valve; with 4/Wheel Disc Brake Conversions; Various Models
If you need a new disc brake metering valve or prefer the cleaner, updated appearance of a modern brake combination valve for your 1955-57, 1967-1972 model, or require a replacement for a 1971-1977 application, this precision...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1975-81 Camaro, Firebird; Rear Park Brake Cable; with Drum Brake; LH Drivers Side
This reproduction rear parking brake cable is designed for the LH (driver side) of 1975-1981 Camaro and Firebird models. Manufactured to original GM specifications, it features the correct overall length, factory style outer...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1974-78 Ford Mustang II; Caliper Bracket Set; Cast Iron; for Stock Height or 2" Drop Spindles; Pair
Our Mustang II caliper brackets are built from cast iron for superior strength. Designed to install on Stock or 2" drop spindles from a 1974-1978 Mustang II coupled with 1978 and newer GM calipers, sold separately. Will fit...
Improve stopping power or replace the brake rotors on the rear of your disc brake equipped vehicle with these brand new 11" diameter performance brake rotors. Each vented rotor features dual 5 x 4.75" and 5x4.5" lug pattern...
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
These brackets are engineered for installing an aftermarket master cylinder and brake booster combo onto the firewall of 1970-1981 Camaro and Firebird models. Each bracket is precision stamped from durable steel and zinc...
1964-81 GM; Park Brake Release Handle; Chrome; Various Models
Reproduction parking brake release handle in chrome for various 1964-81 General Motors vehicles. These chrome handles are manufactured to OE specifications that replicate the original in quality and fitment. Will install on...
1970-73, 1977-81 Camaro, Firebird; Front Brake Hose Brackets; 2 Piece Set
This reproduction front brake hose bracket set is designed specifically for 1970-1973 and 1977-1981 models and is manufactured to factory specifications for an authentic fit. Each bracket features the correct hexagon shaped...
Proportioning Valve Bracket; Bottom Mount; Chrome Plated
Universal fit proportioning valve/combination valve mounting brackets mount your combination valves either to the frame or directly under the master cylinder, providing access to lines and fittings. Each stamped steel bracket...
These brackets are designed for mounting aftermarket 4-bolt master cylinder/booster combinations to the firewall of almost any vehicle that has a flat area for mounting a booster. Universal fit for most aftermarket 7", 8",...
1968-81 GM Pedal Pad Kit; Auto Trans; 3 Piece Kit; Various Models
Reproduction of the original pedal pads to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission. Replacing the pedal pads...
Universal Residual Pressure Valve; Blue; 2 psi
Residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...
9/16" & 1/2" lines for left side mount prop valve. Sold as a pair. Specifications: For use with 9/16" & 1/2" Ports Master Cylinders Use For Left Side Mounting Silver Zinc Plated Steel Lines
Reproduction style proportioning valve lines for use with various models. Measures 1/2" & 3/8" lines for most Ford dual reservoir master cylinders and 3/8" & 3/8" lines for bottom mount proportioning valve. Each line features...
1967-81 Buick, Chevrolet, Pontiac, Oldsmobile; Brake Pad Trim Plate; with Auto Trans
Correct reproduction of the original chrome brake pad trim bezel designed for use with various GM 1967-81 F, Y, and X body models with automatic transmission brake pads. Manufactured in stampled aluminum featuring a bright...
1964-81 Buick, Chevrolet, Oldsmobile, Pontiac; Park Brake Release Handle
OER® reproduction parking brake release handle featuring the correct factory configuration, lettering, and surface grain. Unlike the later GM service replacement versions sold elsewhere, this premium reproduction is an...
1969-87 GM; Park Brake Pedal Pad; Various Models; OER
Correct reproduction of the original style park brake pad designed for use on various 1969-81 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each park brake pad is manufactured in quality EPDM rubber to factory dimensions....
1964-82 Buick, Chevy, Pontiac, Oldsmobile; Brake Pedal Pad; with Auto Trans; Drum Brakes
Reproduction of the original brake pedal pad for use on various 1964-82 GM models with automatic transmissions. Manufactured in quality EPDM flexible rubber that makes installation easy when appplying to the brake pedal....
1969-81 Camaro, Firebird, Nova; Park Brake Pedal Pad Trim Plate
Correct OER® reproduction of the original stainless steel park brake trim plate installed in various GM models from 1969-81 including 1969-81 Camaro models. Each plate is manufactured to original factory specifications...
1967-81 Camaro, Firebird, 1968-74 Nova; Brake Pedal Pad; with Auto Trans & Disc Brakes
This correct OER® reproduction of the original brake pedal pad is designed for use on various GM models including 1968-70 Camaros equipped with both an automatic trans and disc brakes. The reproduction features the...
Universal HydroBoost Unit; Long Pedal Rod Style
Our universal HydroBoost unit features the common 3-3/8" square bolt pattern and generates up to 1800psi of line pressure to the brake calipers. This unit is powered by hydraulic line pressure from the power steering pump...
Brand new reproduction (not rebuilt) brake caliper that was factory-installed for many years on a wide variety of GM mid-size vehicles including the 1969-72 Chevelle, 1973-77 GM A-Body, 1969-81 Camaro, S-10 pickups, and more....
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
Universal Frame Mount Manual Brake Pedal Assembly
Frame mount brake pedal assembly for power brake applications. Powder coated in black, each kit comes with pedal pad to complete the assembly. Includes black powder coated brake pedal rod, brake pedal pad and hardware. For...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1967-69 Rear Drum Backing Plate LH
Reproduction of the original rear brake backing plates for various Gm Models models with 9-1/2" rear drum brakes including Malibu, 442, Chevelle, GTO. Stamped to exact factory specifications featuring the correct thickness...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
1975-81 Camaro, Firebird; Front Parking Brake Cable; OE Specifications; OER
This OER reproduction front parking brake cable is designed specifically for 1975-1981 Camaro and Firebird models. Manufactured to precise factory specifications, this cable features the correct length, factory style casing,...
1975-81 Camaro, Firebird; Rear Park Brake Cable; with Drum Brake; RH Passenger Side
This reproduction rear parking brake cable is designed for the RH (passenger side) of 1975-1981 Camaro and Firebird models equipped with rear drum brakes. Manufactured to original GM specifications, it features the correct...
Improve stopping power or replace the brake rotors on the rear of your disc brake equipped vehicle with these brand new 11" diameter performance brake rotors. Each drilled and slotted rotor features dual 5 x 4.75" and 5x4.5"...
3/8"-24 Brake Pedal Clevis; Zinc Plated
Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is zinc...
This correct double push type line clip is a factory style replacement for various GM models and is designed to secure multiple steel lines to the underside of the vehicle. Stamped to original dimensions, this clip can...
These mounting brackets are designed specifically for installing an aftermarket master cylinder and brake booster combo onto the firewall of 1970-1981 Camaro and Firebird models. Each bracket is precision formed from stamped...
Improve stopping power or replace the brake rotors on the rear of your disc brake equipped vehicle with these brand new 11" diameter performance brake rotors. Each vented rotor features dual 5 x 4.75" and 5x4.5" lug pattern...
1970-73, 1977-81 Camaro, Firebird; Front Brake Hose Bracket; RH Passenger Side
Reproduction passenger side front brake hose bracket designed for use on 1970-73 and 1977-81 Camaro and Firebird models. Reproduced to exact specifications with original markings, this bracket attaches to the frame rail and...
Brake Pedal Rod Extension; 4-3/4"; Zinc Plated; Universal Fit
Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod can be cut to your desired length if necessary. Rod measures 4-3/4"...
Proportioning Valve Bracket; LH Mount; Chrome Plated; Universal Fitment
Universal fit bracket to mount the proportioning valve on the LH side of the master cylinder towrds the driver side fender. Each valve bracket is manufactured in quality stamped steel and chrome plated. Will fit most...
1968-81 GM Pedal Pad Kit; Disc Brake; Auto Trans; 3 Piece Kit; Various Models
Reproduction of the original pedal pads to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission. Replacing the pedal pads...
Universal fit GM style master cylinder push rod kit that includes the parts necessary to install on the 10 most common combinations. This 10-piece adjustable master cylinder push rod kit works with power and non-power...
These brackets are designed for mounting aftermarket 4-bolt master cylinder/booster combinations to the firewall of almost any vehicle that has a flat area for mounting a booster. Universal fit for most aftermarket 7", 8",...
These brackets are designed for mounting aftermarket 4-bolt master cylinder/booster combinations to the firewall of almost any vehicle that has a flat area for mounting a booster. Universal fit for most aftermarket 7", 8",...
Brake Pedal Rod Extension; 1-1/2" with 3/8" hole; Zinc Plated
Brake pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 1-1/2" overall, hole size is 3/8" on the end, 3/8'-24 threads. Comes...
Brake Pedal Clevis; Chrome Plated; 3/8"-24
Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is chrome...
Chevy, GM, Ford, Mopar; Proportioning Valve Bracket Bottom Mount; Zinc Plated;
Universal fit proportioning valve/combination valve mounting brackets mount your combination valves either to the frame or directly under the master cylinder, providing access to lines and fittings. Each stamped steel bracket...
Residual Pressure Valve; Red; 10 psi
Residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...