1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1979-81 Firebird,Trans Am; Fuel Door Assembly; with Spring and Bracket; Smoke
Reproduction rear panel fuel door assembly for 1979-81 Firebird & Trans Am models. Features smoke lens and is produced with the recess area for models equipped with the Firebird emblem on the fuel door (emblem is not included...
1979-81 Firebird, Trans Am; Fuel Door Assembly; with Spring and Bracket; Smoke
Reproduction rear panel fuel door assembly for 1979-81 Firebird & Trans Am models. Features smoke lens and is produced without the recess area for models that did not include the Firebird emblem on the fuel door. Each...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1979-81 Firebird, Trans Am; Fuel Door; Smoked; without Logo
Reproduction of the original fuel door designed for use with 1979-81 Firebird and Trans Am models. Each fuel door is manufactured to correct factory specifications and features a smoke color with red reflector at the bottom...
1976-81 Camaro, Firebird; 1976-79 Nova; Fuel Tank Mounting Straps; Pair
Reproduction fuel tank mounting straps produced using heavy duty zinc-plated pre-formed steel for an original appearance. If you are replacing your gas tank or restoring your classic, you may want to replace your old gas tank...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1975-81 Camaro, Firebird; Accelerator Cable; 267, 305U, 305, 350L
Factory service replacement accelerator cable for use with 1975-81 Camaro models with 267, 305, 350 V8 engines, and 1976-80 Firebird models with 305U, 350L, 1980 267, 350H NM6 Canadian emissions (export). This cable extends...
1979-81 Firebird/Trans Am Fuel Door Bracket, Hinge, and Spring Assembly; with Hardware
Reproduction rear panel fuel door bracket, hinge and spring assembly for 1979-81 Firebird & Trans Am models. Each stamped steel fuel door bracket, hinge, and spring assembly is manufactured to original specifications and...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
1962-81 GM; Fuel Tank Sending Unit Lock Ring; Small; 1-15/16"; Various Models
Correct reproduction fuel tank sending unit locking ring which secures the fuel tank sending unit to the gas tank. Replaces the original ring which are commonly destroyed when being removed. This ring helps to seal the...
This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...
1969-81 Fuel and Brake Line Clip ; Dual Line 3/8" and 1/4"
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models
Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...
Fuel and Brake Line Clip Set ; Dual Line 3/8" and 1/4" ; 7 Piece Set
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1979-81 Firebird/Trans Am Fuel Door Assembly with Bracket and Emblem; Smoke With Silver Bird
Reproduction of rear panel fuel door assembly for 1979-81 Firebird and Trans Am models. Features smoke lens and includes a new silver and black Firebird emblem for the fuel door. Each injection molded fuel door is...
1979-81 Firebird/Trans Am Fuel Door Assembly with Bracket and Emblem; Smoke With Gold Bird
5Reproduction of rear panel fuel door assembly for 1979-81 Firebird and Trans Am models. Features smoke lens and includes a new gold and black Firebird emblem for the fuel door. Each injection molded fuel door is manufactured...
1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models
Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....
OER® reproduction of the original driver and passenger side tail lamp lens set with fuel door for 1979-81 Firebird Trans Am models with silver Firebird emblem. Meticulously manufactured to exact specifications, each...
1979-81 Pontiac Trans Am; Tail Lamp & Fuel Door Assembly Set; without Firebird Emblem
OER® reproduction of the original driver and passenger side tail lamp lens set with fuel door for 1979-81 Firebird Trans Am models. Meticulously manufactured to exact specifications, each injection molded lens is designed...
1972-81 GM Pedal Pad Kit; Manual Trans; 4 Piece Kit; Various Models
Reproduction of the original pedal pads designed for use on 1976-81 Camaro, Firebird and various other GM models. This pedal pad set is designed to replace the worn out original pads for models with disc brakes and manual...
OER® reproduction of the original driver and passenger side tail lamp lens set with fuel door for 1979-81 Firebird Trans Am models with gold Firebird emblem. Meticulously manufactured to exact specifications, each...
1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel
OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...