1978-81 El Camino, Caballero, Malibu; Fender; LH
Reproduction LH fender for 1978-81 Chevrolet El Camino, GMC Caballero, and Chevrolet Malibu models. Manufactured in stamped steel to factory specifications, this fender replicates the original GM design for proper fit,...
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Skin; LH
Reproduction LH door skin for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door skin replicates the original...
Reproduction LH rear frame rail section for 1978-88 Monte Carlo, Cutlass, Regal, and Grand Prix, and 1978-83 Malibu 2-door models. Each frame rail section is manufactured from quality stamped steel to factory specifications...
Reproduction floor pan half for various 1978-88 A-Body and G-Body 2 door models. Manufactured to factory specifications, featuring original style contours and stiffening ribs for added support matching the factory design....
Reproduction T-top header panel with weatherstrip retainer channels designed for 1978-87 Buick Regal, Type T, Limited, Grand National, and other GM G-Body models equipped with factory T-tops. Each panel is manufactured from...
Reproduction front floor pan repair panel for 1978-87 Regal and various other 1978-88 GM A-Body and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the...
1978-88 Regal, GM G-Body; Lower A Pillar; RH Passenger Side
Reproduction lower A pillar repair panel for various 1978-88 G-Body models. Manufactured to factory specifications for proper fitment and appearance. Comes EDP coated for rust prevention. Replaces the often rusted out lower...
1978-88 GM A-Body, G-Body; Lower B-Pillar Panel; RH Passenger Side
Reproduction lower B-Pillar panel for 1978-88 GM A-Body, and G-Body models including Buick Regal. Replace the damaged or rusted panel on your classic GM vehicle with this quality reproduction panel. Each panel is manufactured...
1978-88 Chevrolet; Oldsmobile, A & G Models; Floor Hump Panel; with Manual Trans; Various GM Models
Reproduction manual transmission floor hump for 1978-88 GM A/G-Body models. This part is a direct replacement for manual transmission models and very useful for manual transmission conversions. Features and Benefits: Stamped...
1974-92 Buick, Chevrolet, Pontiac, Oldsmobile; Front Floor Pan Plug; 3-3/4" x 3-1/2"; Various Models
Reproduction original style floor pan plug designed for use on various 1974-92 GM models. Each floor pan plug is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"
Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...
1974-92 GM; Floor & Trunk Pan Floor Plug; 5" x 4"; Stamped Steel; Various Models
Reproduction original style floor/trunk pan plug designed for various 1974-92 GM models. Each floor plug is manufactured in stamped steel to factory specifications featuring correct contours for an authentic appearance and...
Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Shell; RH
Reproduction RH door shell for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door shell replicates the original...
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Shell; LH
Reproduction LH door shell for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door shell replicates the original...
1978-88 Regal, Monte Carlo, Cutlass, Grand Prix, G Body; Complete Floor Pan; 2 Door; EDP Coated
Reproduction of the original complete floor pan designed for use with 1978-87 Buick Regal, Chevrolet, Oldsmobile, and Pontiac G-body 2 door models. Each panel is manufactured in quality stamped steel to original factory...
1978-83 Malibu, 1978-87 El Camino; Cowl Induction Hood; Steel; 2" Rise
Add a high-performance appearance to your 1978-83 Malibu 1978-87 El Camino or Caballero with this cowl induction performance steel hood. Developed for the enthusiast who's seeking a high performance look, this steel cowl hood...
1978-81 El Camino, Caballero, Malibu; Fender; RH
Reproduction RH fender for 1978-81 Chevrolet El Camino, GMC Caballero, and Chevrolet Malibu models. Manufactured in stamped steel to factory specifications, this fender replicates the original GM design for proper fit,...
1978-85 El Camino, Caballero; 1978-83 Malibu 2 Door Hardtop; Door Skin; RH
Reproduction RH door skin for 1978-85 Chevrolet El Camino, GMC Caballero, and 1978-83 Chevrolet Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this door skin replicates the original...
Reproduction RH rear frame rail section for 1978-88 Monte Carlo, Cutlass, Regal, and Grand Prix, and 1978-83 Malibu 2-door models. Each frame rail section is manufactured from quality stamped steel to factory specifications...
Reproduction of the original windshield A-pillar designed for use with 1978-87 GM G-Body models with the t-top roof option. Each A-pillar is manufactured to correct factory specifications replicating the original design,...
Reproduction of the original windshield A-pillar designed for use with 1978-87 GM G-Body models with the t-top roof option. Each A-pillar is manufactured to correct factory specifications replicating the original design,...
Reproduction T-top header panel with weatherstrip retainer channels designed for 1978-87 Buick Regal, Type T, Limited, Grand National, and other GM G-Body models originally equipped with factory T-tops. Each panel is...
1978-88 Buick, Olds, Pontiac, Olds G-Body; Inner Rocker Panel; LH Driver Side
Reproduction inner rocker panel for various 1978-87 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each rocker panel is manufactured to factory specifications featuring original style contours replicating the...
1978-88 Buick, Olds, Pontiac, Olds G-Body; Inner Rocker Panel; Passenger Side
Reproduction inner rocker panel for various 1978-87 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each rocker panel is manufactured to factory specifications featuring original style contours replicating the...
Reproduction rear floor pan repair panel for 1978-87 Regal and various 1978-88 GM A-Body and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the complete...
1978-87 Regal, Grand National, 1978-88 GM A, G-Body; Front Floor Repair Panel; RH; EDP Coated
Reproduction front floor pan repair panel for 1978-87 Regal and various other 1978-88 GM A-Body and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the...
1978-88 GM A-Body, G-Body; Lower B-Pillar Panel; LH, Driver Side
Reproduction lower B-Pillar panel for 1978-88 GM A-Body, and G-Body models including Buick Regal. Replace the damaged or rusted panel on your classic GM vehicle with this quality reproduction panel. Each panel is manufactured...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"
Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
OER® Professional Grade; Black Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER Professional Grade; Weld-Thru Galvanizing Spray Coating; Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz)
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). Perfect for...
OER® Gray Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Gloss Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Flat Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Gray High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade Gray Weld-Thru Galvanizing Spray Coating Case of 6 - 16 Oz Aerosol Cans
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Perfect for application on the inside of newly installed panels...
OER® Dark Gray High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
Reproduction of the original B-Pillar T-Top Corner repair panel for 1978-88 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each roof corner panel is manufactured in stamped steel to factory specifications for a...
OER® High Solids Stainless Steel Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER Professional Grade Red Oxide Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 17...
OER® Gloss Black High Solids Detail Coating 16oz Net Weight
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Green Zinc Phosphate Primer; 16 Oz. Aerosol Can (Net Wt 12 Oz)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER® Professional Grade; Red Oxide High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Red Oxide Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade; Gray Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 15 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 15...
1978-88 Regal, GM G-Body; Lower A Pillar; LH Driver Side
Reproduction lower A pillar repair panel for various 1978-88 G-Body models. Manufactured to factory specifications for proper fitment and appearance. Comes EDP coated for rust prevention. Replaces the often rusted out lower...
Reproduction of the original B-Pillar T-Top Corner repair panel for 1978-88 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each roof corner panel is manufactured in stamped steel to factory specifications for a...
OER® Professional Grade Green Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Professional Grade Yellow Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Gray Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Red Oxide Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Wrinkle Finish Paint Case of 6 - 16 Oz Aerosol Cans
Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...
OER® Aluminum High Solids Detail Coating Case of 6- 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® High Solids Stainless Steel Detail Coating 16 Oz Net Weight Aerosol Can
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Yellow Zinc Phosphate Primer; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER High Solids Coating Aerosol; Aluminum; 20 Oz Aerosol Can (Net Wt. 16 Oz.)
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...
Ford, Lincoln, Mercury; Floor Pan Metal Plug; Each; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Can be used as a...
Nylon Retainer Clip; Push-In; 11/16" Head Diameter; 5/16" Stem Diameter; 13/16" Stem Length; Black
Black nylon retaing clip that pushes into a 5/16" hole to install and secure various components OEM Part Number Cross Reference: GM: 11569768, 15958694, 1605396 Chrysler: 6030441 Ford: 388577S, W705589-S300 Specifications:...