1970-81 Camaro, Firebird, GM X-Body; Side Hood Rubber Stopper; Each
Correct reproduction of the original hood rubber stopper for use with 1970-81 Camaro & Firebird models. Each stopper is manufactured in quality EPDM rubber and features the correct configuration and design. Sold individually....
OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...
1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER
Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...
1970-81 Camaro; Weatherstrip Kit; w/Outer Door Reveal Molding, w/OEM Window Felts; w/o T-Tops
Reproduction of the original style weatherstripping designed for use with 1970-81 Camaro models without the optional T-Tops. Keep your interior protected from the elements and reduce cabin noise by replacing your dried-out,...
1970-81 Camaro / Firebird; Heater Pipe Grommet; with AC
Reproduction heater pipe grommet for vehicles originally equipped with air conditioning. Each grommet is manufactured to replicate the original in quality and design. Features a rubber outer body with a metal base ensuring an...
1978-81 Camaro, Firebird; Fisher T-Top Panel Weatherstrips, Pair
Reproduction of the original Fisher style T-top panel weatherstripping designed for use on 1978-81 Camaro and Firebird models. These weatherstrips attach to the removable roof glass to eliminate rattles and noise and keep out...
1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)
Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models
Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...
1958-84 GM; Outer Rear Hood Rubber Stoppers; Pair; Various Models
Reproduction outer rear hood bumpers for various GM models. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment. Sold in pairs. Use as required Buick...
1978-81 Camaro, Firebird; Fisher T Top Body Weatherstrip Seal; Pair; OER
Reproduction of the original Fisher T-top roof panel weatherstrip designed for use on 1978-81 models. The weatherstripping attaches to the removable glass roof panels and the roof surrounding the glass. Each weatherstrip unit...
1970-81 Camaro without Outer Door Reveal Molding or T-Tops Weatherstrip Kit with OEM Style Felts
Keep your interior protected from the elements and reduce cabin noise by replacing your dried-out, cracked or just plain missing original weatherstrip with this reproduction weatherstrip kit. Each weatherstrip component is...
Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural
This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...
1970-81 Camaro / Firebird Roof Rail Weatherstrip Blow Out Clips
These rubber dipped spring steel clips are used to properly retain your roof rail weatherstrips to the roof rail strip. This part is manufactured from die formed steel and features a rubberized coating as original. Each clip...
1955-81 Chevrolet, GMC, Pontiac; Air Cleaner Lid Rubber Seal; 59" Long x 5/16" Wide
Reproduction air cleaner lid seal for a variety of GM car and truck models as listed. Designed to seal the area between the lid and the base offering a tight seal for the air cleaner on models that required this seal. {specs}...
1970-81 Chevrolet Camaro; Rubber Stopper Kit; 20 Piece Set
OER® reproduction of the original rubber stoppers and bumpers originally installed on all 1970-81 Camaro models. The rubber stopper set includes all the correct stoppers and rubber bumpers required for the driver's and...
1978-81 Camaro; Weatherstrip Kit; OE Style Felt; w/o Reveal Molding; with Fisher T-Tops
Reproduction of the original style weatherstripping designed for use with 1976-78 Firebird models with the optional Fisher T-Tops. Keep your interior protected from the elements and reduce cabin noise by replacing dried-out,...
1978-81 Camaro; With Reveal Molding; With Fisher T-Top; Weatherstrip Kit; Black Felt
Keep your interior protected from the elements and reduce cabin noise by replacing dried-out, cracked, or missing original weatherstrip with this quality reproduction weatherstrip kit by OER. Each weatherstrip component is...
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models
Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...
1970-81 Camaro, Firebird; Door Frame Weatherstrip Seals; with Molded Ends; Pair
Reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1970-81 Camaro and Firebird models. Manufactured in the correct configuration which allows easy installation when replacing...
1970-81 Camaro, Firebird; Roof Rail Weatherstrip, Coupe, Pai; OER
Reproduction of the original roof rail weatherstrip designed for use on 1970-81 Camaro and Firebird coupe models. These quality weatherstrips are manufactured to the correct factory configuration and seal the area between the...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1978-81 Chevy Camaro; Tail Light Housing to Body Gasket; Molded Rubber; RH Passenger Side
Reproduction of the original tail lamp gasket designed for use on all 1978-81 Camaro models. The gasket is manufactured in molded rubber ensuring a quality replacement. The gasket acts as a cushion between the tail light...
Sealstrip Glass Setting Tape; 10 Foot Roll; 1/32" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1967-81 Camaro, Firebird; Trunk Weatherstrip Seal; OER
Reproduction trunk weatherstrip for 1967-81 Camaro and Firebird models. Each rubber weatherstrip measures 13-1/2 feet in length, and is manufactured with correctly configured extruded rubber. The weatherstrip is extruded to...
Outer Door Bullet Mirror Gasket ; 1970-81 Camaro / Firebird, 1973-74 Nova
Correct reproduction of the original outer door bullet mirror gasket designed for use on various GM models. This gasket separates the mirror base from the outer door metal. For use with bullet style mirrors in the various...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1970-88 Buick, Chevrolet, Oldsmobile, Pontiac; Outer Door Handle Gasket; LH or RH ; Each
Reproduction door handle gasket for 1970-81 GM F-Body and 1973-88 G-Body models. This gasket inserts on the back of the outer door handle and acts as protection between the handle and the paint. Sold individually. 2 gaskets...
1962-81 Trunk Lock Cylinder Gasket ; Die-Cut Replacement
Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...
1978-81 Chevy Camaro; Tail Lamp Housing To Body Gasket; Molded Rubber; LH Drivers Side
Reproduction of the original tail lamp gasket designed for use on all 1978-81 Camaro models. The gasket is manufactured in molded rubber ensuring a quality replacement. The gasket acts as a cushion between the tail light...
1970-81 Camaro, 1977-81 Firebird; Hood To Cowl Seal Clip Set; 18 Piece Set
Reproduction clips designed to install the hood to cowl seal on 1970-81 Camaro and 1977-81 Firebird models. The hood to cowl weatherstrip seal attaches to the cowl top vent grill area between the hood and cowl panel. Each set...
1970-81 Camaro / Firebird Standard Mirror Gasket ; with Chrome Mirror
Correct reproduction of the original standard outer door mirror gasket originally installed on all 1970-81 models with chrome mirrors. Manufactured in injection molded ABS to factory specifications. Fits left or right hand...
1962-81 GM; Glove Box Door Arm Rubber Bumper
OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
Door, Vent, Quarter Glass; Sealstrip Glass Setting Tape;10 Foot Roll; 1/16" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1970-81 Camaro, Firebird, Nova, Ventura; Upper Clutch Push Rod Boot; Various Models
OER® reproduction upper clutch push rod boot for various 1970-81 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each boot is manufactured using high-quality EPDM automotive-grade rubber to replicate the original in...
1970-81 Camaro, Firebird; Front Fender Skirt Splash Apron Set; RH & LH; Pair
Replace worn or missing splash aprons with this factory-style reproduction set and restore proper protection to your engine bay. Each apron is manufactured to original specifications, designed to seal the space between the...
Sealstrip Glass Setting Tape ; 10 Foot Roll ; 3/64" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1970-81 Camaro, Firebird; Fender and Spoiler Welting Seal ; 32" ; Various Models
This special front fender and front spoiler welting is designed to help to seal fender flares or front spoiler extensions to the body. Although the configuration can vary from model to model, this welting can be used...
1970-81 Camaro, 1977-81 Firebird; Hood To Cowl Seal ; 3 Piece Set
Correct reproduction of the original style weatherstripping which attaches to the cowl top vent grill and seals the area between the hood and the cowl panel. This is a correct reproduction of the original seal that includes...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1941-76 Mohair Window Channel Liner ; 2-5/8" wide x 8" long
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1970-81 ChevyCamaro; Rear Hood Rubber Stopper; Each
Correct reproduction rubber bumper for 1970-81 Camaro models. This bumper is manufactured in quality EPDM rubber replicating the original in quality and design. Fits on the rear outer section. The hood rests on the bumper...
1970-87 Buick, Chevrolet, Olds, Pontiac; Upper Control Arm Bumper; Various Models; Each
Reproduction control arm bumper for Buick, Chevrolet, Oldsmobile, and Pontiac models. This upper control arm bumper is designed to replicate the factory original and is essential for proper suspension travel and ride control....
1978-81 Camaro, Firebird; T-Top A Pillar Weatherstrip Channels; Pair
Reproduction A-pillar post weatherstrip channels for 1978-81 Camaro and Firebird models with T Tops. These weatherstrip channels attach to the A-pillar and act as a mounting point for the pillar post weatherstrip. Includes RH...
Reproduction rear axle compression bumper which attaches to the body and keeps the rear axle from bottoming out. Manufactured using hard rubber material with molded in stud for mounting. This is the second design bumper that...
1941-76 Mohair Window Channel Liner ; 1-5/8" Wide x 8" Long x 1/16" Thick
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...