1973-80 Chevy Pickup, Blazer, Jimmy, Suburban; Front Bumper; Chrome; w/o Impact Strip Holes
OER® Authorized reproduction of the original chrome front bumper designed for use with 1973-80 Chevrolet and GMC truck models. This quality reproduction ftont bumper is manufactured to factory specifications featuring a...
OER Authorized sliding rear window to fit 1973-86 Chevrolet/GMC C/K and 1987-91 R/V pickup truck models. Features a three panel design, self-locking latch, and a slim line frame to enhance visibility. Aluminum frames feature...
1967-87 Chevrolet, GMC Stepside Pickup Truck; Chrome Rear Bumper
Reproduction of the original chrome rear bumper designed for use with 1967-87 Chevrolet and GMC Stepside pickup truck models. Each bumper is manufactured to original factory specifications replicating the original in design,...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1973-84 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Windshield Wiper Arm; RH or LH; Each
OER® Authorized reproduction bayonet style windshield wiper arm for all 1973-84 Chevrolet & GMC truck models including Suburban, Crew Cab, Blazer, and Jimmy. Each wiper arm is manufactured to OE factory specifications in...
1967-87 Chevy, GMC Stepside Pickup; Rear Bumper; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome rear bumper designed for use on 1967-1987 Chevrolet and GMC Pickup truck models. This reproduction bumper is designed exclusively for the restorer who demands the best...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Spring; Each; Made in the USA!
Correct reproduction of the original hood hinge spring designed for use on 1973-80 Chevrolet and GMC truck models. Each spring is manufactured to OE specifications and features the correct tension ratio, offering the highest...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1973-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Exterior Door Handle; Chrome; LH; Drivers Side
Reproduction outer door handle for 1973-86 Chevrolet and GMC C/K and 1987-91 R/V pickup, Blazer, Jimmy, and Suburban models. This beautiful, chrome plated reproduction is perfect for any early restoration. Includes door...
1973-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Exterior Door Handle; Chrome; RH; Passenger Side
Reproduction outer door handle for 1973-86 Chevrolet and GMC C/K and 1987-91 R/V pickup, Blazer, Jimmy, and Suburban models. This beautiful, chrome plated reproduction is perfect for any early restoration. Includes door...
1973-80 Fleetside, Suburban, Blazer, Jimmy; Rear Bumper; Black Powdercoat; w/o Impact Strip Holes
Reproduction of the original chrome rear bumper designed for use with 1973-80 Chevrolet and GMC Fleetside pickup trucks, Chevy Blazer, GMC Jimmy, and all Suburban models. Each bumper is manufactured to original factory...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; LH Driver Side
Reproduction of the original hood hinge assembly for 1973-80 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Each hood hinge is manufactured from quality stamped steel assuring a quality replacement. This hood...
1954-87 Chevy, GMC Stepside; Rear Roll Pan; with License Plate Pocket; without License Lamps
Customize the rear end of your classic Chevrolet or GMC stepside pickup truck with a sleek looking steel rear roll pan. This all steel roll pan is just what you need to add a cutom appearance. Manufactured in stamped steel...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
Reproduction of the original style low mount outer door mirror for 1973-87 Chevrolet and GMC Pickup, Blazer, Jimmy and Suburban models. The stainless steel mirror head measures 9" x 6-1/2". Fits left hand (driver side) or...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models without a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models without a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
1976-91 Chevy, GMC Pickup Truck; Back Window Glass; Large; Tinted; 16" x 64" x 1/8"
Reproduction of the original back window glass designed for use with 1976-91 Chevrolet and GMC pickup models with large back window glass. This glass measures approximately 16" x 64" x 1/8". Each rear window glass is...
1973-87 Chevrolet, GMC; Bed Angle Strips; Short Bed; Stepside; Stainless Steel; Polished
Reproduction of the original angle strips that attach the side boards on 1967-72 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...
1954-87 Chevrolet/GMC Truck; Tail Gate Trunnions; Stepside
Reproduction lower trunnions designed for 1954-1987 Chevrolet and GMC stepside pickup truck models. Each trunnion is manufactured to original factory specifications and plated for long lasting dependability. The trunnions...
1967-91 Chevy, GMC Pickup, Blazer, Suburban; Bracket; License Plate; Rear; Chrome Plated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
1973-87 Chevrolet, GMC Stepside Pickup; Long Bed; Angle Strips; Stainless Steel; Unpolished
Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Black
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Blue
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Saddle
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Buckskin
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Oxblood
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Blue
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Dark Gray
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Maple / Canyon
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Willow Green
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Caramel
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Mandrin Orange
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1974-87 Chevrolet/GMC Truck; Regular Cab; Rear Wall Carpet; Cutpile; Almond
Manufactured to replicate the original style cut pile, this premium, 100% nylon carpet is made using 40% more top quality nylon than standard cut pile and is 50% heavier in weight for greater durability and a more luxurious...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1973-80 C/K Pickup with Small 12" x 38" Window Clear Back Window Glass
Replace scratched, damaged or missing original glass with our OEM quality replacement. Each glass is professionally packed with extra care to avoid damage during shipping.
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1973-80 C/K Pickup with Small 12" x 38" Window Tinted Back Window Glass
Replace scratched, damaged or missing original glass with our OEM quality replacement. Each glass is professionally packed with extra care to avoid damage during shipping.
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Zinc plated tapping screw is needed. Sold individually.
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
1967-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear License Plate Bracket; EDP Coated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1977-81 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Power Door Window Regulator; RH Passenger Side
Reproduction power door window regulator for 1977-81 Chevrolet & GMC truck, Blazer, Jimmy, and Suburban models. Each regulator is manufactured in quality stamped steel to factory specifications replicating the original...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...