1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
This stock replacement spindle set is designed for a variety of GM vehicles and is manufactured to match the original GM spindles in every critical dimension. Constructed from durable cast iron and finished in black for an...
This drop spindle set is designed to provide a full 2 inch drop on a variety of GM vehicles while preserving factory ride quality, suspension geometry, and handling characteristics. Each spindle is manufactured from durable...
New performance upper and lower rear control arms for 1978-87 Buick Regal and various 1978-88 GM G Body models. Constructed from heavy gauge square boxed steel tubing, these control arms deliver a significant strength upgrade...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/8" diameter bar. This versatile sway bar fits a wide range of GM vehicles including Buick Skylark and Special,...
1954-05 GM; Front Sway Bar End Link; 3-3/8" Spacer; LH or RH; 2 Required; GK8988
Complete replacement set designed to restore proper suspension performance by replacing the original worn bushings and hardware. Manufactured to factory specifications for durability and precise fit. Features and Benefits:...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/4" diameter bar. Engineered to significantly reduce body roll, under steer, and over steer during cornering, this...
This stock replacement spindle is designed for a variety of GM applications and is engineered to match the original GM spindle in design, fit, and function. Manufactured from durable cast iron and finished in black for an...
1978-88 Buick, Chevrolet, Olds, Pontiac A, G-Body; Rear Trailing Arm Set; Lower
Reproduction rear lower trailing arms for 1978-88 A & G-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Reproduction front sway bar bushing and mounting bracket set for 1964-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a 1-1/4" sway bar. Manufactured to factory specifications, this set includes two...
1978-05 GM; Lower Control Arm Bushing; Rearward
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
Stock style upper and lower rear control arms for 1978-87 Buick Regal and various 1978-88 GM G Body models. Manufactured from heavy gauge steel and finished in durable black powdercoating, these control arms provide an...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
These sway bars are engineered to reduce body roll, under steer, and over steer during cornering, resulting in noticeably improved handling, stability, and overall vehicle control. Designed to deliver better road feel without...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
This stock replacement spindle is designed for a variety of GM vehicles and is manufactured to replicate the original GM spindle in both fit and function. Constructed from durable cast iron and finished in black for an...
1978-88 Buick, Chevrolet, Olds, Pontiac A, G-Body; Rear Trailing Arm Set; Upper
Reproduction rear upper trailing arms for 1978-88 A & G-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4" to 4" inclusive. These heat treated washers are for general purpose and structural use. For use...
1978-98 GM Cars & Trucks; Lower Control Arm Bushing; (Toward Front of Car)
Reproduction control arm bushing for the front position in the lower control arm on various Gm vehicles as listed. Rubber bushing is encased in steel sleeve as original. Sold individually. Specifications Material: Steel Clad...
1982-2003 GM; Upper Control Arm Bushing; Pair; Varuous Models
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...