Product#: RL7

Leaf Spring U-Bolts; 3-1/4" Wide X 6-3/4" Long; Fits 3-1/4" Axle Tubes

Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...


Product#: 499473

1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body

Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...


Product#: *RL5

5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style

Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: K550

1970-81 Camaro, Firebird, 1970-79 Chevy II, Nova and X-Body; Rear Spring Shackle Bushing Set

Reproduction rear leaf spring shackle for 1970-79 Chevy II/Nova, GM X-Body, and 1970-81 Camaro, Firebird models. Each shackle eplaces the old or worn out original hardware and bushings with a quality reproduction. Includes...


Product#: 12297

1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each

Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...


Product#: 748600

1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each

Reproduction of the lower rear shock mounting bolt for 1968-69 Camaro, Firebird, and 1968-79 Nova, 1971-77 Ventura, 1973-80 Omega, 1973-75 Apollo, 1975-80 Skylark models with multi-leaf springs. This essential bolt was...


Product#: RL6

Rear Shock Extension Fine Thread

Extends shock 2" allowing shocks to reach the shock mount on body. (For use on mono to multi-leaf conversions). 1 pair required


Product#: A8500301

1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"

Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....


Product#: A8500300

1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6

Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...


Product#: 480913

1970-81 Camaro, Firebird; Rear Outer Sway Bar Bushing; Each

OER reproduction of the rear outer sway bar bushings for 1970-81 Camaro models with a hi perfpmance 350, hi perfomance/heavy duty suspension and Z28 models. Also used by Pontiac for 1977-81 Trans Am and Formula models....


Product#: 3982300

1970-81 Rear Sway Bar Bracket ; 1970-81 F-Body, 1970-79 X-Body ; Various Models

This OER® reproduction of the original rear sway bar bracket manufactured from high grade stamped steel to original specifications. Sway bar brackets hold the sway bar bushings to the frame and secures the rear sway bar...


Product#: A8500200

1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set

This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...


Product#: *R654

1970-81 Camaro / Firebird Rear Leaf Spring Pad Set

Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs.


Product#: SU1111Z

1969-82 Rear Stabilizer Bar Link; Upper Bracket GM#485336

Reproduction rear stabilizer/swaybar bar link upper bracket for 1969-81 Chevrolet Camaro, Pontiac Firebird and 1969-1970 Chevrolet Nova models. This is the upper bracket that mounts the rear stabilizer/sway bar link to the...


Product#: SU2461Z

1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"

We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...


Product#: SU0078Z

1958-13 Various GM Vehicles Including Chevelle, Skylark, Cutlass, GTO; Front Sway Bar/Stabilizer Bar; Bushing WS6; 7/8"

New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...


Product#: *K3614

1967-81 Rear Spring Eye Bracket Bolt Set (6 piece)

Quality reproduction of the original rear spring eye bracket bolt designed to mount the leaf spring front eye bracket. Each bolt is case hardened for durability and long lasting performance. 6 bolts included in each set....


Product#: SU2266Z

1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"

New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...


Product#: SU1316Z

1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"

New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....