1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1978-81 Chevrolet Camaro; Rear Fuel Door; w/ Hinge Spring and Bracket; Standard, Z28
Reproduction rear fuel door and hinge assembly for 1978-81 standard and Z28 Camaro models. Manufactured to exact factory specifications, this fuel door features correct mounting holes for application of the fuel filler door...
1975-79 Nova, Apollo, Ventura, Omega; NiTerne Fuel Tank; 21 Gallon
Correct reproduction of the original fuel tank designed for with 1975-79 Chevrolet Nova and GM X-body models as listed below. This reproduction fuel tank is manufactured in Niterne steel. This is a 21 gallon fuel tank that...
1978-81 Camaro; 1979-81 Firebird; Fuel Tank; Zinc Coated; 21 Gallon Tank
Reproduction of the original style 21 gallon fuel tank designed for use with 1978-81 Camaro and 1979-81 Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc...
1975-79 Nova, Apollo, Ventura, Omega; Fuel Tank; Zinc Coated; 21 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1975-79 Chevrolet Nova and GM X-body models as listed below. This reproduction fuel tank is manufactured in zinc coated steel and includes the fuel sender...
Reproduction fuel tank for carbureted gasoline powered or diesel powered 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon, El Camino and Caballero models. This fuel tank is manufactured in zinc-coated...
1974-81 Chevrolet, GMC Suburban; Zinc Coated Fuel Tank; 40 Gallon Tank
Reproduction of the original fuel tank designed for various 1974-81 Chevrolet and GMC Suburban models. This fuel tank is made of zinc coated steel and measures 35" x 28 3/4" x 13 1/8". This fuel tank has a capacity of 40...
1973-81 Chevrolet, GMC Pickup Truck; Short Bed; Fuel Tank; Zinc Coated; 16 Gallon Tank
Reproduction of the original fuel tank assembly designed for use with 1973-81 Chevrolet and GMC short bed pickup truck models. Comes complete with the locking ring for the fuel sender and the fuel sender's sealing O-ring....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1973-81 Chevy, GMC Blazer, Jimmy, Suburban; Zinc Coated Fuel Tank; 31 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1973-81 Chevrolet and GMC Blazer, Jimmy, and Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for...
1973-91 Chevrolet, GMC Pickup Truck; Rear Fuel Tank Support Hanger; Bracket with Strap; Each
Reproduction fuel tank support hanger, bracket and strap for 1973-87 Chevrolet and GMC truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an original appearance...
1973-91 Chevrolet, GMC Pickup; Front Fuel Tank Support Hanger; Bracket with Strap; Each
Reproduction of the original rear fuel tank support hanger, bracket and strap designed for use with for 1973-87 Chevrolet and GMC truck models. Each support hanger is manufactured in quality stamped steel to original factory...
Reproduction fuel tank sending unit for 1978-87 Chevrolet El Camino and GMC Caballero models equipped with a 17.5-gallon fuel tank. Manufactured to factory specifications, this sending unit accurately measures the fuel level...
1978-81 Chevrolet Corvette; Fuel Tank Sending Unit; with Dual 1/4", 3/8" Outlets; Stainless Steel
Reproduction fuel sending unit for 1978-81 Chevrolet Corvette. Each sending unit is manufactured in stainless steel to correct factory specifications to replace the old, or non working original exactly. This is a dual 1/4"...
Reproduction of the original style fuel tank mounting straps designed for use with 1976-81 Camaro, Firebird, and 1976-79 Nova, and X-body GM models. Each strap is manufactured in quality stainless steel to original factory...
1973-79 Chevrolet, GMC Pickup; Fuel Tank Sending Unit; 3-Line; with Drivers Side Fuel Tank
Reproduction of the original fuel tank sending unit designed for use with 1973-79 Chevrolet and GMC pickup truck models with 3 line driver side fuel tank. After years of use, your fuel sending unit can wear out or stop...
1973-79 Chevrolet, GMC Pickup Truck; Fuel Sending Unit; 3-Line; Passenger Side Tank
Reproduction fuel tank sending unit for 1973-79 Chevrolet and GMC pickup truck models with 3 line passenger side tank. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause...
1973-79 Chevrolet, GMC Truck; Fuel Tank Sending Unit; LH Mounted Tank; 2 Outlets
Reproduction of the original fuel tank sending unit designed for use with 1973-79 Chevrolet and GMC pickup truck models with 2 outlets and drivers side fuel tank. After years of use, your fuel sending unit can wear out or...
1976-81 Camaro, Firebird; 1976-79 Nova; Fuel Tank Mounting Straps; Pair
Reproduction fuel tank mounting straps produced using heavy duty zinc-plated pre-formed steel for an original appearance. If you are replacing your gas tank or restoring your classic, you may want to replace your old gas tank...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet, GMC truck models as listed. For use on all 1973-86 C/K truck models, and 1987-91 R/V series with 16 gallon or 20 gallon saddle...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction fuel tank mounting strap set for various 1977-1988 Buick, Chevrolet, Pontiac, and Oldsmobile full size models as listed (except station wagon). Each strap is manufactured in quality stamped steel, galvanized and...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1973-78 Chevrolet, GMC C/K Fleetside Truck; Vent Pipe Upper Hose; 5/8" I.D.
Reproduction vent pipe hose for 1973-78 Chevrolet and GMC C/K fleetside trucks. Measures 5/8" inside diameter, made of rubber, and fits on the LH side on 1973-78 models and the RH side on 1973-76 models. Replaces OE #'s...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet Blazer, Suburban, and, GMC Jimmy, Suburban models with 31 gallon fuel tank. Each strap is manufactured in quality stamped steel,...
1975-78 Chevrolet, GMC C/K Fleetside; Vent Pipe Hose; Auxiliary Tank; Upper, RH
Reproduction vent pipe hose for 1975-78 Chevrolet and GMC C/K fleetside trucks. Made of rubber, and fits on the RH side on 1975-78 models with auxiliary tank. Replaces OE # 359871. Fitment Notes: 1975-1978 RH Side Aux Tank
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1978-82 Corvette; Gas Tank Filler Neck Seal
Replace your damaged or missing gas tank filler neck seal with this quality reproduction for 1978-82 Corvette models.
1968-81 Corvette; Fuel Pump Return Hose
Replacement return hose for 1968-81 Corvette models. This 1/4" hose goes between the fuel pump and the tank.
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1978-1981 Camaro, 1979-1981 Firebird; Fuel Tank; with Fuel Neck; Stainless Steel; 21 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1978-1981 Camaro and 1979-1981 Firebird models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering...
1978-81 Camaro; 1979-81 Firebird; Ni-Terne Coated Fuel Tank; 21 Gallon
Reproduction of the original style fuel tank designed for use with 1978-81 Camaro, and 1979-81 Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring an original Niterne...
1978-82 Chevrolet Corvette; Fuel Tank; Zinc Coated; 24 Gallon Capacity
Reproduction fuel tank for 1978-1982 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a 18...
1977-79 Impala / 1977-80 GM Full Size (Except Wagon); Fuel Tank With Neck; 19 Gallon; Niterne
Reproduction of the original fuel tank for 1977-79 Impala/Caprice and various GM Full Size models except station wagon. Manufactured in authentic niterne steel. Note: Shipped Truck Freight. Chevrolet Applications: 1977-1979...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1976-81 Camaro, Firebird, 1973-79 Nova, X-Body; Fuel Tank Sending Unit; with Return Line; 3/8" Line
Reproduction fuel tank sending unit for a variety of GM models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send...
Replacement fuel tank without filler neck for carbureted gasoline powered 1977-79 Chevrolet passenger models (except wagon). This fuel tank measures 39-3/4" x 26-1/2" x 9-1/4" and has a capacity of 19 gallons. Includes the...
Reproduction fuel tank for 1977-79 Impala, Caprice, 1977-80 Delta 88, Bonneville, Catalina models (except station wagon). Each fuel tank is manufactured in quality stamped steel and zinc plated matching the original OE...
Reproduction of the original style fuel tank designed for use with 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon models. This fuel tank is manufactured in zinc-coated stamped steel to original...
1976-81 Buick, Chevy, Olds, Pontiac; Fuel Tank Sending Unit; 3/8" Single Line
After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...
1973-81 Chevrolet, GMC Long Bed Pickup; Zinc Coated Fuel Tank; 20 Gallon
Reproduction of the original fuel tank assembly designed for use with 1973-81 Chevrolet and GMC long bed pickup truck models. Complete replacement gas tank assembly for 1973-81 Chevrolet and GMC trucks. The fuel tank is...
Reproduction of the original fuel tank assembly designed for use with 1973-81 Chevrolet, GMC Blazer, Jimmy, Suburban, and 1975-80 Pickupo truck models. Each tank is manufactured in stamped steel and zinc coated for long...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1975-78 Chevrolet, GMC; Fleetside Pickup Truck; C/K;; Fuel Filler Neck Hose
Reproduction fuel filler neck hose for 1975-78 Chevy and GMC C/K fleetside pickup truck models. Each hose is manufactured to correct factory dimensions and features correct size, shape, and contours. Replaces your cracked or...
1975-81 Camaro, Firebird; Accelerator Cable; 267, 305U, 305, 350L
Factory service replacement accelerator cable for use with 1975-81 Camaro models with 267, 305, 350 V8 engines, and 1976-80 Firebird models with 305U, 350L, 1980 267, 350H NM6 Canadian emissions (export). This cable extends...
1973-78 Chevrolet, GMC Fleetside Truck; Fuel Filler Neck
Reproduction fuel filler neck for 1973-78 Chevrolet and GMC Fleetside truck models. Each filler neck is manufactured to original factory specifications for an authentic appearance and functionality. Comes complete with the...
1973-79 Chevrolet. GMC Pickup; Fuel Sending Unit; 2-Line; 16/20 Gallon Tank"; Passenger Side
Reproduction of the original fuel tank sending unit designed for use with 1973-79 Chevrolet and GMC pickup truck models with 2 line. 16-20 gallon tank. After years of use, your fuel sending unit can wear out or stop working....
1973-78 Chevrolet, GMC Stepside Pickup; Fuel Filler Neck Hose; LH Driver Side
Reproduction fuel filler neck hose for various 1973-78 GMC/Chevy models. Featurse correct size and contours. The dimensions are: 17.5" long X 1-3/8" ID hole X 1-5/8" OD hole. Applications: 1973-78 Chevy/GMC Stepside Trucks -...
1973-91 Blazer, Jimmy; Fuel Filler Neck Cover
Reproduction stamped steel cover to seal the passenger compartment where the fuel filler neck protrudes through the quarter panel on 1973-91 BVlazer and Jimmy models. This cover was designed by the factory to improve the...
Reproduction fuel tank sending unit for 1978-88 Chevrolet Malibu, Monte Carlo, Buick Regal, Oldsmobile Cutlass, Pontiac Grand Prix, and Grand Am models. Manufactured to factory specifications, this sending unit accurately...