1973-81 Gearshift Knob Button with Auto Trans ; Various Models
Correct OER® reproduction of the original gearshift knob button that inserts into the shift knob. Manufactured with injection molded ABS to exact factory specifications. Once button is installed and pressed, will allow...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
Turbo 350; Transmission Dipstick And Tube; 27" Long
This chrome plated dipstick with tube for the GM turbo hydromatic 350 transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper...
Universal Frame Mount Manual Brake Pedal Bracket Assembly; GM Booster Style; Under Floor Mount
Universal frame mount brake pedal assembly for GM style brake booster with 4 bolt 3-3/8? center. For automatic transmission equipped, left hand drive hot rod and truck models. Great for under the floor, frame mount...
1969-90 GM; Speedometer Cable Retainer Clip; Various Models
Reproduction of the original speedometer cable retainer clip designed for use with various for 1969-90 General Motors vehicles. This retainer clip is manufactured in stamped steel replicating the original design. Retains the...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...
Kickdown Cable; with TH350 Trans; Stainless Braided; 55" long
Stainless steel transmission kick-down cable that fits TH350 transmissions with carburetor kick-down cable. Designed for 4 barrel-type carburetors and small block Chevrolet engines. Includes extender for more versatility in...
Reproduction speedometer cable for various 1958-68 GM applications with automatic transmission including Impala, GTO, Camaro, Skylark. This cable is a screw on type at both ends and is 57" long. If the speedo isnt working or...
1966-90 Buick, Chevrolet, GMC, Pontiac, Oldsmobile; Speedometer Cable; 66"; Push-On Style; OER
Reproduction of the original speedometer cable designed for use with various 1966-1990 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. This reproduction speedometer cable is manufactured to original GM specifications...
Reproduction speedometer cable and casing for various 1966-91 models including Camaro, Firebird, Skylark, Cutlass plus Chevrolet & GMC trucks. Each cable is manufactured to correct factory specifications for proper fitment...
1967-90 Buick, Chevrolet, GMC, Pontiac, Oldsmobile; Speedometer Cable; 83"; Push-On Style; OER
Quality reproduction of the original speedometer cable designed for use with various 1967-90 GM applications including Regal, Impala, GTO, Camaro and Chevrolet & GMC Truck models. This complete speedometer cable assembly is...
GM TH350/400 Transmission Dipstick; Flexible Firewall Mount; 27" Long
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
1973-81 Gearshift Knob with Console and Auto Trans ; Various Models
Correct OER® reproduction of the original gearshift control knob installed on all 1973-81 Camaros with automatic transmissions. Each gearshift knob is manufactured to correct factory specifications and designed for use on...
1967-1979 GM; Torque Converter Cover; Turbo 350; For Starter Mounted on RH Driver Side
Reproduction torque converter cover (also called a flexplate/flywheel cover) for various 1967-79 GM vehicles with TH350 transmissions and a 153 tooth flex plate. Each cover is manufactured in injection molded ABS replicating...
OER® reproduction of the original transmission control cable bracket that holds the transmission control cable for 1973-81 models with automatic transmissions and a center console. This steel bracket mounts to the drivers...
Reproduction torque converter cover for 1976-87 GM models with a TH200 (MV9) or TH200-4R (MW9) transmission. Each torque converter cover is manufactured in stamped steel to original factory specifications featuring correct...
1962-79 GM; Flywheel Clutch Housing Cover; for 10-1/2" Bellhousing; Manual Trans; OER
Correct flywheel / clutch cover plate designed for various 1962-79 GM models. Each cover is manufactured in quality stamped steel for an authentic replacement. This cover is located on the bellhousing and is used to cover the...
1965-83 Buick, Chevy, Pontiac, Olds; Clutch Fork Ball Stud; Each
Replacement clutch fork ball stud for various 1965-83 Buick, Chevrolet, Pontiac, and Oldsmobile models. This stud attaches inside the clutch bellhousing to provide a pivot point for the clutch fork. Measures 13/16" -16 x...
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
1967-81 Camaro, Firebird, Nova; Brake & Clutch Pad Trim Plate; Manual, Transmission; Various Models
Correct reproduction brake and clutch pedal pad trim plate for various 1967-81 GM models with manual transmission. Each steel pedal trim plate is designed to replicate the original in fit, appearance and design. {specs}...
1962-83 GM Clutch Fork Boot; 3-1/2" x 2-5/8"
OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...
1969-86 Buick, Chevrolet, Pontiac, Oldsmobile; Shift Knob Attachment Clip; Auto Trans; with Console
OER® reproduction of the original clip for use with automatic transmissions shift levers. Attaches the shift knob to the lever on vehicles equipped with factory GM auto trans console shifter. A necessary clip required to...
1970-81 Camaro, Firebird, Nova, Ventura; Upper Clutch Push Rod Boot; Various Models
OER® reproduction upper clutch push rod boot for various 1970-81 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each boot is manufactured using high-quality EPDM automotive-grade rubber to replicate the original in...
1975-81 Camaro, Nova, Corvette, Firebird; Clutch Flywheel Housing Cover; Manual Trans; T10; OER
Reproduction of the original clutch flywheel housing cover designed for use on various 1975-81 GM vehicles with Borg Warner T-10 manul transmissions. This cover is used to protect the clutch flywheel housing for vehicles with...
1953-2010 GM; Rear Axle/Transmission Ventilator; for 3/8" Hole
OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...
1961-79 GM; Transmission Control Cable Grommet; OER
OER® reproduction of the original GM transmission control cable grommet for all 1961-79 GM models. Designed to factory specifications in the correct configuration for a perfect fit and manufactured in rubber as original....