1969-87 Chevrolet, Pontiac; Door Hinge Repair Set; Except with 15mm OD Bushings
Reproduction of the original door hinge components for use on various GM models. Repair the broken door hinges with this comprehensive repair set. Each repair kit includes 4 properly hardened shoulder pivot pins and 8...
1976-81 Camaro, Impala, Firebird; Chrome Outer Door Handle; Passenger Side
Reproduction of the original style outer door handle designed for use with various 1976-81 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each handle features a smooth chrome finish and replaces the old or worn out...
1970-81 Camaro, Firebird, Impala; Upper Front Door Hinge; RH Passenger Side; Various Models
This OER® reproduction door hinge restores proper door operation on 1970-81 models. The factory doors were extremely heavy and often caused the original hinges to wear or sag over time. Replacing them with this...
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1976-88 Buick, Chevy, Pontiac Olds; Exterior Door Handle; Black; LH Driver Side; Various Models
Reproduction of the original style exterior door handle designed for use with various 1976-88 Buick, Chevrolet, Pontiac, and Oldsmobile models. This door handle is produced in die-cast metal featuring a glossy black finish...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Bright Finish
Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with bright finish face finish, two generic logo keys, cylinder...
1969-81 Buick, Chevy, Pontiac, Olds; Lower Door Hinge; RH or LH; Each; Various Models
OER® reproduction of the original lower door hinge designed for use on various GM A, B, and F-Body models. Each hinge is manufactured from heavy-duty stamped steel, providing long-lasting strength and reliability....
1976-81 Camaro, Impala, Firebird; Chrome Outer Door Handle; LH Drivers Side
Reproduction of the original style outer door handle designed for use with various 1976-81 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each handle features a smooth chrome finish and replaces the old or worn out...
1970-81 Camaro, Firebird, Impala; Upper Front Door Hinge; LH Drivers Side; Various Models
This OER® reproduction door hinge restores proper door operation on 1970-81 models. The factory doors were extremely heavy and often caused the original hinges to wear or sag over time. Replacing them with this...
1969-2002 Nylon Rod Clip, Fits 5/32" Rod Diameter; 1/4" Hole Size; LH Driver Side; Varius Models
Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
1968-81 GM; Door Glass Roller Washer; Various Models
Reproduction plastic washer that pushes through the door glass on various 1968-81 GM models. Exact reproduction of the original door glass roller washer. Sold individually. Use as required. Replaces OE # 4491087. {fitment}
1976-88 Buick, Chevy, Pontiac Olds; Exterior Door Handle; Black; 5-5/8" Long; RH; Various Models
Reproduction of the original style exterior door handle designed for use with various 1976-88 Buick, Chevrolet, Pontiac, and Oldsmobile models. This door handle is produced in die-cast metal featuring a glossy black finish...
1964-87 Buick, Chevy, Pontiac, Olds; Door Lock Striker Washer; Various Models; Pair
Reproduction of the original door striker plate washers designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each washer is manufactured in quality injection molded ABS to factory...
1967-86 GM; Door & Quarter Window Roller Bushing; Glass to Cam; Each
Reproduction of the original style window regulator guide roller to glass bushing for use with various 1967-86 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. This bushing is manufactured in...
Door Lock Striker Bolt Washer Shim ; 2.00MM Thick ; Each
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Black
Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with black face finish, two generic logo keys, cylinder retainers,...
1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models
Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...
1962-91 Door Lock Cylinder Retainer; Each
Reproduction of the original type lock cylinder retainer required on various 1962-91 GM models. If you're replacing your lock cylinder, it will probably be necessary to replace the cylinder retainer. Manufactured in spring...
Door Lock Striker Bolt Shim - 4.00MM Thick ; Each
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1970-88 Buick, Chevrolet, Oldsmobile, Pontiac; Outer Door Handle Gasket; LH or RH ; Each
Reproduction door handle gasket for 1970-81 GM F-Body and 1973-88 G-Body models. This gasket inserts on the back of the outer door handle and acts as protection between the handle and the paint. Sold individually. 2 gaskets...
1971-87 GM Passenger Car and Truck; Door Lock Striker; for Front or Rear Door; Various Applications
Replacement style door lock striker plate designed to replace worn out or damaged originals. Worn out striker plates can interfere with the correct operation of the door. Replacing the original striker will help maintain...
OER Reproduction of the original quarter window guide roller designed for use on various GM models including 1971-76 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile Full Size passenger 2-door models. Installs on the...
1947-87 GM; Car and Truck; Window Crank Handle Washer Plate; Each; Various Models
OER® reproduction interior handle washer plate for most 1947-87 GM models without power windows. Manufactured in injection molded ABS plastic material as original, this plate prevents the window crank handle from damaging...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1959-1993 GM; Door Inside Locking Rod Clip; Various Models; Each
This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...