Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1974-78 Camaro; Interior Door Panel Emblems ; Type LT
OER® reproduction of the original interior door panel emblems and bezels designed for use with 1974-78 Chevrolet Camaro Type LT models. Manufactured to original OE specifications featuring a textured chrome finish with...
1974-79 Camaro; Interior Door Panel Emblems ; Red / White / Blue Badge; Pair
OER® reproduction of the original interior door panel emblems and bezels designed for use with 1974-79 Camaro models. Each bezel is manufactured as original featuring a textured chrome finish with an injection molded...
1974-81 Camaro Interior Door Panel Emblems ; SS
OER® reproduction of the original interior door panel emblems and bezels designed for use with 1974-81 Camaro SS models. Each bezel is manufactured as original featuring a textured chrome finish with an injection molded...
1974-81 Camaro Interior Door Panel Emblems ; with Black Bow Tie Logo
OER® reproduction of the original interior door panel emblems and bezels designed for use with 1974-81 Camaro models. Each bezel is manufactured as original featuring a textured chrome finish with an injection molded Bow...
1963-72 Chevrolet; "572 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1964-81 GM; Rear End Positraction Tag; Red; 12 Bolt; 1" Tag
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-81 Chevrolet; "Cowl Induction" Hood Emblem Set; Pair
Reproduction of the original "Cowl Induction" hood emblem originally designed for use with 1970-72 Chevelle. El Camino and Monte Carlo models, but can be used on Camaro hoods as well. Manufactured in quality die-cast zinc...
1975-77 Camaro; "Camaro" Front Fender Emblem; Each; GM Licensed
OER® reproduction of the original Camaro lower case block lettered fender emblem originally installed on 1975-77 Camaro models. Manufactured in zinc die-cast metal to factory specifications replicaing the original in...
1963-72 Chevrolet; "502 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
"Objects In Mirror Are Losing " Exterior Side Mirror Decal; 4" x 5/8"
This is a crack up and a must have. Decal reads "OBJECTS IN MIRROR ARE LOSING".
1964-89 GM; Rear Axle ID Tag; Various Models
Reproduction limited slip rear axle ID tag that ensures the correct type of gear oil is added to the rear end. This tag was mainly used with 1964-89 GM models indicating the proper lubrication requirement. Attaches to the...
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1971-81 Camaro, 1971-79 Nova; Horn Cap Emblem; Bow Tie
Reproduction Bowtie horn cap emblem for 1971-81 Camaro and 1971-79 Nova models equipped with the optional NK4 4-spoke sport steering wheel. The emblem features a black background with a white Bow Tie insignia. Refer to part...
1974-79 Camaro; Horn Cap Emblem; Badge
OER® reproduction horn cap emblem for 1974-79 Camaro models equipped with the optional NK4 4-spoke steering wheel. This emblem features the red, white and blue Camaro "shield" logo on a black background with red border....
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
1971-81 Camaro, Nova; SS Horn Cap Emblem
OER® reproduction of the original SS horn cap emblem designed for use on 1971-81 Camaro Super Sport models. This emblem features the classic "SS" letter logo on a black background with silver border. This emblem is...
1971-81 Camaro, Nova; Horn Cap Emblem; Bow Tie with Silver Circle
Reproduction steering shroud emblem for 1971-81 Camaro and 1971-79 Nova models equipped with the optional NK4 4-spoke sport steering wheel. Manufactured in quality injection molded ABS to factory dimensions. The emblem...
1974-76 Camaro; "Type LT" Sail Panel / Rear Panel Emblem; 3 Pin Design; Each; GM Licensed; OER
Reproduction of the original "Type LT" exterior roof panel and sail panel emblem for use with 1974-76 Camaro Type LT models. This emblem was originally installed on the sail panel (b-pillar) of 1974-76 Camaro Type LT models,...
1973-78 Camaro; Horn Cap Emblem; Type LT
Reproduction horn cap emblem for 1973-78 Camaro Type LT models equipped with the optional NK4 4-spoke steering wheel. This horn cap emblem features the TYPE LT logo on a black, blue and white background. Refer to part number...
Wheel Center Cap Decal; Black IROC-Z Logo; 2 1/2" Diameter
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a black IROC-Z logo on a silver background. Each emblem measures...
Wheel Center Cap Decal; with Chrome Camaro Logo; 2 1/2" Diameter
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a chrome Camaro logo on a black background. Each emblem measures...
Wheel Center Cap Decal; Black Camaro Logo; 2 1/2" Diameter
This distinctive domed wheel center cap decal is manufactured with a poured polyurethane coating to provide an upscale 3-dimensional appearance and features a black Camaro logo on a silver background. Each emblem measures...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
1974-81 Camaro; Interior Door Panel Emblem Bezel; Each
Reproduction of the interior door panel emblem bezel designed for 1974-81 Camaro models. Manufactured in quality injection-molded ABS plastic featuring a bright chrome finish, this bezel, along with the emblem of your choice...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Thread Cutting Pal Nut, 5/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...