Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Reproduction side mount gas tank for 1969-78 Ford F-100, F-150, F-250, F-350 Pickup Trucks without EEC. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 60 in. x 14...
Reproduction side mount gas tank for 1973-79 Ford F-100, F-150, F-250, F-350 Pickup Trucks with EEC. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 60 in. x 14 in....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1948-86 Ford; Fuel Tank Sending Unit Brass Float; Various Models
Reproduction of the original style and correct brass float for use with various 1948-86 Ford and Mercury models as listed below. This sending unit brass float is desirable for its long-lasting dependability as it lasts much...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1973-79 Ford F100, F250, F350 Truck; Fuel Tank Sending Unit; Mid-Tank
Reproduction main gas tank fuel level sending unit for 1973-79 Ford F-100, F-250, F-350 truck models with mid-tank (Except 1974-79 Super Cab models). This sending unit installs in the original fuel tank mounted midship to the...
Reproduction rear fuel tank sending unit for 1973-84 Ford F100, F150, F250, F350 pickup truck models with aft fuel tank. This sending unit is designed and manufactured to factory specifications. Will replace the old or...
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction rear mount upper gas tank straps for 1973-1979 Ford F100, F150, F250, F350 trucks. Each strap is manufactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for rust and corrosion...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1966-96 Ford, Mercury; Lower Fuel Tank Filler Pipe Seal; Various Models
Reproduction of the original fuel tank to filler pipe seal designed for use on various1966-97 Ford and Mercury applications. Each seal is manufactured to correct factory specifications and replaces the old or missing original...
Reproduction rear mount lower gas tank straps for 1973-1995 Ford F100, F150, F250, F350 trucks. Each strap is manufactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for rust and corrosion...
1968-79 Ford ; Accelerator Pedal Trim; Stainless Steel; Various Models
Reproduction accelerator pedal pad trim manufactured to exact factory specifications featuring configuration and bright polished stainless steel finish. For various 1968-71 Ford car models and 1973-79 Ford truck models as...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Reproduction rear / aft mount gas tank for 1973-78 Ford F-100, F-150, F-250, F-350 Pickup Trucks. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 34-3/4 in. x 27...
Reproduction rear / aft mount gas tank for 1973-79 Ford F-100, F-150, F-250, F-350 Pickup Trucks. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 34-3/4 in. x 27...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1960-97 Ford, Mercury; Fuel Tank Sending Unit O-Ring; Various Models
Our synthetic rubber fuel sending unit oring gasket seal is produced to be resistant to heat, oil and chemicals. Features superb elasticity and bonding capabilities to ensure that it will not lose its shape over time. Will...
Reproduction side mount gas tank straps for 1973-1979 Ford F100, F150, F250, F350 trucks. Each strap is manufactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for rust and corrosion...
1960-97 Ford, Mercury; Fuel Tank Sending Unit Retaining Lock Ring; Three Tab Style
Reproduction fuel sending unit retaining lock ring for various 1960-97 Ford & Mercury models. Each ring is manufactured in quality stamped steel for an original fit. Twists into place in the fuel tank to secure the sending...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
1968-79 Ford Car & Truck; Accelerator Pedal Pad; Various Models
Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, and grip pattern. For various 1968-71 Ford car models and 1973-79 Ford truck models as listed. Replaces Ford part #...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1973-79 Ford F100, F250, F350 Super Cab Truck; Fuel Tank Sending Unit; Mid-Tank; 3/8" Inlet
Reproduction main gas tank fuel level sending unit for 1974-79 Ford F-100, F-250, F-350 Super Cab truck models with mid-tank. This sending unit installs in the original fuel tank mounted midship to the frame. Includes gasket,...
Reproduction fuel tank filler neck for in-cab tanks on 1973-76 Ford F100, F150, F250, F350 pickup truck models. Each filler neck is manufactured in quality stamped steel featuring zinc plating with black EDP coating for...
1973-79 Ford F-100, F-150, F-250, F350; Fuel Tank; 38 Gallons; With Roll-Over Valve Hole; F26B
Rear Mounted 38 Gallon Steel Gas Tank for Ford F-Series Pickup. This tank is the basis of a popular conversion. May require sending unit modifications to lengthen pick-up tube because of the added depth of the tank. Often...
1973-78 Ford F-100, F-150, F-250, F350; Fuel Tank; 38 Gallons; Without Roll-Over Valve Hole; F26A
Rear Mounted 38 Gallon Steel Gas Tank for Ford F-Series Pickup. This tank is the basis of a popular conversion. May require sending unit modifications to lengthen pick-up tube because of the added depth of the tank. Often...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1961-77 Ford F100, F150, F250, F350 Pickup Truck; Fuel Tank Sending Unit; with Gasket, Float
Reproduction of the original main gas tank fuel level sending unit designed for use with 1961-77 Ford F-100, F-250, F-350 truck models. This sending unit installs in the original fuel tank inside the cab. Includes gasket and...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}