1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1955-81 GM; Leaf Spring U-Bolts; 3-1/4" wide x 6-3/4" long; Fits 3-1/4" Axle Tubes; Pair
Replacement OE style U bolts and nuts for rear leaf springs from OER. Designed to secure the leaf spring pack to the rear axle with factory correct strength and reliability. Each set includes heat treated Grade 8 nuts and...
1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body
Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
Replace the sagging leaf springs on your classic GM vehicle with this high quality set produced by OER. These replacement rear leaf springs are engineered to directly replace the original multi leaf spring set while...
1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1968-74 Nova, Ventura, Apollo, Omega; Front End Suspension Rebuild Kit; Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
Reproduction rear leaf spring shackle for 1970-79 Chevy II/Nova, GM X-Body, and 1970-81 Camaro, Firebird models. Each shackle eplaces the old or worn out original hardware and bushings with a quality reproduction. Includes...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; RH Passenger Side
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova, and X-body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1970-81 Rear Sway Bar Bracket ; 1970-81 F-Body, 1970-79 X-Body ; Various Models
This OER® reproduction of the original rear sway bar bracket manufactured from high grade stamped steel to original specifications. Sway bar brackets hold the sway bar bushings to the frame and secures the rear sway bar...
1968-69 Camaro, Firebird, 1968-79 Nova; Multi Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, preventing metal to metal contact that can lead to noise, vibration, and premature wear. These pads help maintain proper...
1962-87 Buick, Chevrolet, Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set; Various Models
This rivet style bolt set attaches the ball joint to the upper control arm while providing the authentic appearance of factory installed rivets. Each bolt features a serrated locking rivet style head that prevents spinning...
Includes all the components needed to replace the original bushings and hardware. One set services only one side of the vehicle, with two sets required per vehicle. Features a 2" spacer for proper installation and alignment....
1967-81 Camaro, Firebird, Nova, GM X-Body; Rear Spring Eye Bracket Bolt Set; 6 Piece Set
Quality reproduction rear spring eye bracket bolts designed to mount the leaf spring front eye bracket. Each bolt is case hardened for exceptional durability, strength, and long lasting performance. An ideal replacement for...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
1967-81 Camaro Z/28, Firebird, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-1969 Camaro Z28 (302), 1968-1981 Firebird 400 and other performance models, as well as Chevy II, Nova, and various GM X body models originally...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Bolt and nut designed to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened fastener measures 7/16"-20 x 1-15/16" and is engineered specifically for models equipped with the...
Replacement sway bar designed to reduce body roll, under steer, and over steer during cornering, resulting in improved vehicle handling, control, and driving confidence. Engineered to enhance stability without negatively...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1967-74 Camaro, Firebird, Nova, Omega, Ventura, Apollo; Front End Bushing Kit
The control arm bushings are a critical component in maintaining proper vehicle control and overall suspension performance. Worn or deteriorated bushings can negatively affect handling, ride quality, and steering response,...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Sway Bar; OE Design ; 7/8"; Silver Zinc Plating
Reproduction of the original design rear sway bar set for various 1968-74 GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II Nova, and 1973-74 GM X-body models. Features a gold zinc plated finish similar to the...
Rear Leaf Spring U-Bolts; 3-1/2" Wide X 7-1/4" Long; Fits 3-1/2" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; LH Driver Side; EDP Coated
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova, and X-body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-69 Camaro, Firebird, 1962-74 Chevy II, Nova; Mono Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, reducing metal to metal contact, vibration, and noise. These pads help protect the spring assembly, maintain proper suspension...
1967-81 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Pinion Bumper; Each; Various Models
This reproduction rear axle pinion bumper is designed for various GM models and manufactured from high quality molded rubber with an integrated steel bracket formed in the correct OE configuration. Built to replicate the...
1967-74 Camaro, Firebird, Nova; Front Sway Bar Sleeve Brackets; Pair
Reproduction of the correct front sway bar sleeve brackets designed for use with various 1967-74 Chevrolet, Buick, Oldsmobile, and Pontiac models. These sleeve brackets mount on the front sway bar next to the sway bar bracket...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4" to 4" inclusive. These heat treated washers are for general purpose and structural use. For use...
1967-81 Camaro, Firebird, Nova, GM X-Body; Rear Spring Eye Bracket Nut; Each
This is a quality reproduction of the original style spring eye bracket nut used to mount the leaf spring front eye bracket. Manufactured to high strength specifications, each nut is designed to provide secure, long lasting...
1968-79 Camaro, Firebird, Nova, X Body; Rear Leaf Spring Pad; Multi Leaf; Upper & Lower; Each
Reproduction of the original multi leaf, upper and lower rear leaf spring pad designed for use on various GM models. Each pad is manufactured to OE specifications in EPDM rubber compound. Always replace the rear leaf spring...
1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each
Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Leaf Spring Installation Kit; Multi Leaf; with Sway Bar
Reproduction of the original and complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro, Firebird, and 1968-74 Nova models....
1967-69 Camaro, Firebird, 1962-74 Chevy II, Nova; Rear Leaf Spring Pad; Upper; with Mono Leaf
Reproduction of the original mono leaf upper rear spring pad designed for use on various GM models. Each pad is manufactured to OE specifications using quality EPDM rubber compound for long lasting dependability. Always...
1955-74 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bushing; Each; Various Models
1958-1970 Chevrolet Biscayne 1958-1970 Chevrolet Bel Air 1966-1970 Chevrolet Caprice 1970-1972 Chevrolet Monte Carlo 1968-1968 Chevrolet Chevy II 1968-1974 Chevrolet Nova 1955-1957 Chevrolet Bel Air 1955-1957 Chevrolet One...
1962-81 GM; Rear Leaf Spring Front Eye Bracket Bolt ; Each; Various Models
Quality reproduction of the original rear spring eye bracket bolt designed to mount the leaf spring front eye bracket. Each bolt is case hardened for exceptional durability, strength, and long lasting performance. An ideal...
1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each
Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Leaf Spring Installation Kit; Multi-Leaf; w/o Sway Bar
Complete rear leaf spring installation kit engineered for 1967-1974 GM vehicles originally equipped with multi-leaf rear springs, including 1967-1969 Camaro and Firebird models. Each kit delivers all essential components for...
1962-74 Camaro, Firebird, Nova ; X body; Rear Leaf Spring Pad; Lower; with Mono Leaf; Each
Reproduction of the original lower mono leaf spring pad designed for use on various GM models. Each pad is manufactured to OE specifications using high quality EPDM rubber for long lasting durability and proper cushioning....
1969 Camaro, Firebird, 1968-74 Nova; Rear Sway Bar Links; Pair
Reproduction rear sway bar links for 1969 Camaro and Firebird and 1968-1974 Chevy II and Nova models. These links attach to the upper rear frame rails and sway bar, restoring proper factory rear suspension function. Designed...
1967-74 Camaro, Firebird, Nova, GM X-Body; Rear Leaf Spring Front Eye Bolts & Nuts ; Pair
Original style reproduction rear spring front eye bolt and nut set for 1967-1974 Camaro and Firebird, 1968-1974 Nova, 1971-1974 Ventura, and 1973-1974 Apollo and Omega models. Manufactured to factory specifications for...
1970-81 Camaro, Firebird, 1970-79 Nova, GM X-Body; Rear Spring Shackle Bushing Set; 8 Piece Set
This reproduction rear spring shackle bushing set is designed for 1967-1969 GM models and manufactured in high quality EPDM hard rubber to replicate the factory originals in both fit and performance. These bushings restore...
1967-69 Camaro, Firebird; 1968-81 Nova, GM X-Body; Leaf Spring Liner Set ; 5 Leaf; 8 Piece Set
These leaf spring liners promote smooth, friction free operation once installed, reducing metal to metal contact between the spring leaves. This helps quiet the ride, improve overall driving comfort, and extend the life of...
Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head
3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
1967-69 Camaro, Firebird, 1968-79 Nova, GM X-Body; Rear Mono-Leaf Spring Installation Kit
Complete rear leaf spring installation kit engineered for 1967-1979 GM vehicles originally equipped with mono-leaf rear springs. This all-in-one solution includes correctly detailed shackles, high quality hardware, spring...
1968-79 Camaro, Firebird, Nova; Leaf Spring & Shock Anchor Plate; w/Sway Bar; Drivers Side
Reproduction of the original rear spring and shock anchor plate mount designed for use with 1968-69 Camaro and Firebird, and 1968-79 Chevy II Nova, and GM X-body models as listed below. For use on vehicles with multi-leaf...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...