3/8" X 48" Power Steering Return Hose; Without Fittings; Cut to Fit
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1961-99 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap
Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...
Power Steering Pump or Smog Pump Bracket Spacer; 3/4" O.D. x 3/8" wide
This spacer is used between the power steering pump and mounting bracket or the smog pump and the mounting bracket on various GM models. Use as required. 3/8" width 27/64" inside dia 3/4" outside dia
1965-81 Buick, Chevy, Olds, Pontiac; Power Steering Return Hose
Reproduction of the original power steering return hose for use with various 1971-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific factory dimensions replicating the original in...
3/8" x 24" Power Steering Return Hose; Without Fittings; Cut to Fit
Service replacement power steering hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn out or cracked power...
1968-74 Chevrolet; Power Steering Pump Pulley; For V8 With AC; Double Groove
Reproduction power steering pump pulley for 1969-74 V8 models with AC. Fits Chevrolet 307 / 350 / 400 / 454 engines. Number stamped on pulley is 3941107DE. Application Summary: 1968-74 with V8 with AC {fitment} {specs}
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style
Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...
1969-74 GM; Power Steering Pump; "OE-Style" Reservoir; New; 6 cyl, 327, 350,
Reproduction of the original style power steering pump for use with various Buick, Chevrolet, Pontiac, and Oldsmobile 6 cylinder, 327, and 350 models as listed. If you're looking for a power steering pump for your classic...
1969-74 GM 6-Cylinder; Remanufactured Power Steering Pump; with "OE-Style" Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
Power Steering Return Hose; 3/8" I.D. X 36"; Cut to Fit
Reproduction of the original style power steering return hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn...
1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style
Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...
1961-74 GM, 1968-74 AMC, 1963-74 Mopar; Saginaw Type Power Steering Pump; without Reservoir; New
OER Authorized power steering pump for use with various 1961-74 AMC, GM, and Mopar models with a Saginaw style power steering pump. Each pump is manufactured to correct OEM standard of quality. This new power steering pump is...
1973-75 Buick Regal Remanufactured Power Steering Pump with Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
5/16"-24 Grade 8 Hex Nut Zinc; Each
5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1970-81 GM; Motor Mount Bolt; 7/16"-14 x 4-5/8"; Stamped "RSC"; Each
Reproduction bolt used to mount the steering box to the frame. Will work on both power or manual steering boxes. This is a 7/16" bolt that is 4-5/8" long. The bolts are made from high strength grade 8 steel which as been...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...
1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit
Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...
1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...