1956-80 General Motors / Mopar Truck Power Steering Return Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1970-74 Chevrolet, Pontiac; Chrome Power Steering Pump; with "A-Style" Reservoir; 6 or 8 Cylinder
Dress up your engine compartment with this all new OER® Authorized chrome power steering pump with a banjo style reservoir. This all new pump is a great replacement for 6 or 8 cylinder models. This power steering pump...
1973-79 C10, 1975-79 Multiple GM; Small Block Power Steering Pump with "A-Style" Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
1973-74 Power Steering Pump with "Banjo Style" Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
3/8" X 48" Power Steering Return Hose; Without Fittings; Cut to Fit
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1961-99 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap
Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...
1967-74 Camaro, Impala, Nova, El Camino; Power Steering Pulley; Deep Groove
Reproduction of the original style deep single groove power steering pulley designed for use with various 1967-74 Chevrolet models as listed. Each pulley is manufactured in stamped steel replicating the original dimensions...
Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...
Power Steering Pump or Smog Pump Bracket Spacer; 3/4" O.D. x 3/8" wide
This spacer is used between the power steering pump and mounting bracket or the smog pump and the mounting bracket on various GM models. Use as required. 3/8" width 27/64" inside dia 3/4" outside dia
1965-81 Buick, Chevy, Olds, Pontiac; Power Steering Return Hose
Reproduction of the original power steering return hose for use with various 1971-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific factory dimensions replicating the original in...
3/8" x 24" Power Steering Return Hose; Without Fittings; Cut to Fit
Service replacement power steering hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn out or cracked power...
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style
Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...
1973-74 6-Cylinder Power Steering Pump with "A-Style" Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
1969-72 Chevrolet, GMC; Power Steering Adjust Bracket; Small Block; Car & Truck; Various Models
Correct reproduction of the original power steering bracket designed for use with various 1969-1972 Chevrolet models wirh small block engines. Each bracket is manufactured in stamped steel replicating the original...
1969-86 Chevrolet; Power Steering Bracket Set; Small Block; with Long Water Pump; with Hardware
This convenient aluminum power steering bracket set is designed for 1969-86 small block Chevy engines with long water pump. Mounts the power steering pump on the LH or drivers side of the vehicle using the long style water...
1960-75 Camaro, Impala, Nova, Truck; Power Steering Pump Pulley; Single Groove
OER® reproduction of the original power steering pump pulley designed for use with for various 1960-75 Chevrolet models as listed. Manufactured from formed and machined steel with the correct key way fit design and...
Reproduction power steering pump bracket which is required when mounting the power steering pump on Big Block applications.
This is a quality OER® reproduction of the original power steering pump pulley designed for use on various GM applications..This pulley is manufactured to exact factory specifications and stamped with the original GM part...
Power Steering Return Hose; 3/8" I.D. X 36"; Cut to Fit
Reproduction of the original style power steering return hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn...
1961-74 GM, 1968-74 AMC, 1963-74 Mopar; Saginaw Type Power Steering Pump; without Reservoir; New
OER Authorized power steering pump for use with various 1961-74 AMC, GM, and Mopar models with a Saginaw style power steering pump. Each pump is manufactured to correct OEM standard of quality. This new power steering pump is...
1973-75 Buick Regal Remanufactured Power Steering Pump with Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
5/16"-24 Grade 8 Hex Nut Zinc; Each
5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...
1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit
Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...
1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...