1970-81 Camaro, Firebird, GM X-Body; Side Hood Rubber Stopper; Each
Correct reproduction of the original hood rubber stopper for use with 1970-81 Camaro & Firebird models. Each stopper is manufactured in quality EPDM rubber and features the correct configuration and design. Sold individually....
OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1967-69 Camaro, Firebird, 1968-79 Nova; Front Door Bumper; Each
Correct replacement front door rubber bumper for 1967-1969 Camaro, Firebird, 1967-70 Impala, Full Size, 1968-79 Nova, X body 4 door models. Each bumper is replicated to the original OE specifications and fits the door...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models
Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...
1958-84 GM; Outer Rear Hood Rubber Stoppers; Pair; Various Models
Reproduction outer rear hood bumpers for various GM models. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment. Sold in pairs. Use as required Buick...
1968-74 Nova, Apollo, Omega, Ventura; Rubber Stopper Set; 14 Piece Set
Reproduction of the original common rubber bumpers and stoppers used in 1968 Chevy II and 1968-72 Nova and X body models. Each stopper kit includes a variety of rubber bumpers and stoppers that will replace the commonly...
1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models
Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...
1968-81 Nova, Apollo, Omega, Phoenix, Ventura; Outer Door Rubber Stopper Set ; 4 piece set
Reproduction of the original style rubber bumpers designed for use on 1968-79 Chevy II, Nova, and GM X-body models. The rubber stoppers on your door will wear out or detereriate over time. These reproduction stoppers will...
1970-81 Chevrolet Camaro; Rubber Stopper Kit; 20 Piece Set
OER® reproduction of the original rubber stoppers and bumpers originally installed on all 1970-81 Camaro models. The rubber stopper set includes all the correct stoppers and rubber bumpers required for the driver's and...
1970-77 Chevrolet El Camino, Monte Carlo, 1970-73 Chevelle; Hood Stop Stud; Pair
New hood stop studs for 1970-73 Chevrolet Chevelle and 1970-77 Monte Carlo that mount on cowl firewall. 2 are used per car. These lock the hood in back. Sold as pair only. These have the special head with "C".
1974-79 Corvette; Hood Alignment Rubber Bumper; Each
Replacement hood alignment bumper for 1974-79 Corvette models. This bumper is needed to properly align the hood. Some modifications to bumper may be necessary. Simply shave the bumper down if hood is still to high after...
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1961-79 GM; Bucket Seat Back Rubber Stopper Set; Round; w/Mounting Screws; Pair
Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1955-1976 Glove Box Door Arm Rubber Stopper
Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...
Lower Control Arm Bumper / Rear Axle Bumper
Replacement rear axle bumper / lower control arm bumper for models listed below. 1962-67 Chevy II/Nova rear axle bumper. 2 required. 1963-87 Chevrolet/GMC Truck lower control arm bumper. 2 required.
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1973-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Side Rubber Bumper; Each
OER® reproduction of the original hood side bumper designed to keep the hood aligned on 1973-91 Chevrolet and GMC models including Blazer, Jimmy and Suburban. This bumper is manufactured from extruded rubber and fit on...
1962-81 GM; Glove Box Door Arm Rubber Bumper
OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1967-1969 Camaro, Firebird, 1969-1979 Nova, Ventura; Dash Ash Tray Rubber Bumpers, Pair
Reproduction of the original style rectangular ash tray to dash rubber bumpers designed for use with various 1967-1979 models as listed. Each rubber bumper is manufactured in quality EPDM rubber compound replicating the...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1970-81 ChevyCamaro; Rear Hood Rubber Stopper; Each
Correct reproduction rubber bumper for 1970-81 Camaro models. This bumper is manufactured in quality EPDM rubber replicating the original in quality and design. Fits on the rear outer section. The hood rests on the bumper...
1970-87 Buick, Chevrolet, Olds, Pontiac; Upper Control Arm Bumper; Various Models; Each
Reproduction control arm bumper for Buick, Chevrolet, Oldsmobile, and Pontiac models. This upper control arm bumper is designed to replicate the factory original and is essential for proper suspension travel and ride control....
1964-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Door Rubber Bumper Set, 4 Piece Set
OER® reproduction of the original door rubber bumpers designed for use on 1964-1986 C/K and 1987-91 R/V model Chevrolet and GMC pickup trucks. Each rubber stopper is designed to exact factory specifications for a perfect...
1971-82 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Rubber Bumper, Various Models
Features and Benefits: Direct replacement for the second design rear axle compression bumper Prevents rear axle from bottoming out under full suspension compression Hard rubber construction for durability and long service...
1973-81 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Bumpers; 8 Piece Set
Reproduction of the original hood bumpers for 1973-81 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Manufactured in quality EPDM rubber to factory dimensions for an authentic appearance and fitment. Set...