Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models
Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...
1970-81 Camaro, Firebird; Door Frame Weatherstrip Seals; with Molded Ends; Pair
This reproduction door frame weatherstrip set installs on the outer frame of the door on 1970-1981 Camaro and Firebird models. Manufactured in the correct configuration for an easy, factory style installation, it is the...
1970-81 Camaro, Firebird; Roof Rail Weatherstrip, Coupe, Pair; OER
These reproduction roof rail weatherstrips are designed for 1970-81 Camaro and Firebird coupe models and are manufactured to the correct factory configuration to seal the area between the roof rail and the door glass....
1964-79 Camaro, Chevelle, Firebird, Nova, X-Body; Outer Door Handle Gasket Set; Various Models
Reproduction of the original outer door handle gasket set designed to properly seal the exterior door handles on various classic vehicle applications. Each set includes precision die-cut gaskets manufactured to factory...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1973-91 Chevrolet, GMC Pickup; Rear Window Weatherstrip Seal; without Trim Groove
Reproduction rear window weatherstrip seal for the large back window equipped 1973-86 C/K-Series and 1987-91 R/V-Series Chevrolet and GMC Pickup models. Manufactured from ozone resistant EPDM rubber, in the same OE specs as...
1973-93 Chevrolet, GMC C/K, R/V Pickup; Cargo Lamp Mounting Pad Gasket
Reproduction cargo lamp mounting pad gasket for 1973-93 pickup models with cargo lamp mounted on the back of the cab above the rear window. Installs in between the housing and the truck cab to seal the elements out of the cab...
1967-81 Camaro, Firebird; Trunk Weatherstrip Seal; OER
Reproduction trunk weatherstrip for 1967-81 Camaro and Firebird models. Each rubber weatherstrip measures 13-1/2 feet in length, and is manufactured with correctly configured extruded rubber. The weatherstrip is extruded to...
1970-81 Camaro, Firebird, 1973-74 Nova; Outer Door Bullet Mirror Gasket; RH or LH; Each
Correct reproduction of the original outer door bullet mirror gasket designed for use on various GM models as listed. This gasket separates the mirror base from the outer door metal. For use with bullet style mirrors in the...
1962-81 Trunk Lock Cylinder Gasket ; Die-Cut Replacement
Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...
1970-81 Camaro / Firebird Standard Mirror Gasket ; with Chrome Mirror
Correct reproduction of the original standard outer door mirror gasket originally installed on all 1970-81 models with chrome mirrors. Manufactured in injection molded ABS to factory specifications. Fits left or right hand...
1958-75 Clutch Bellcrank Felt Seals ; Pair
OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...
1970-81 Camaro, Firebird, Nova, Ventura; Upper Clutch Push Rod Boot; Various Models
OER® reproduction upper clutch push rod boot for various 1970-81 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each boot is manufactured using high-quality EPDM automotive-grade rubber to replicate the original in...
1970-81 Camaro, Firebird; Front Fender Skirt Splash Apron Set; RH & LH; Pair
Replace worn or missing splash aprons with this factory-style reproduction set and restore proper protection to your engine bay. Each apron is manufactured to original specifications, designed to seal the space between the...
1968-76 Remote Outer Door Mirror Gasket ; Various Models
Reproduction of the original outer door remote mirror mounting gasket for use with the various applications listed. Each gasket is manufactured to replicate the original is fitment and design. Can be used with the original...
1955-79 Outer Door Handle Push Button O-Ring Gasket ; Each
This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1967-74 Upper Clutch Push Rod Boot - Various Models
This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1970-81 Camaro, Firebird; Fender and Spoiler Welting Seal ; 32" ; Various Models
This special front fender and front spoiler welting is designed to help to seal fender flares or front spoiler extensions to the body. Although the configuration can vary from model to model, this welting can be used...
1970-81 Camaro, 1977-81 Firebird; Hood To Cowl Seal ; 3 Piece Set
Correct reproduction of the original style weatherstripping which attaches to the cowl top vent grill and seals the area between the hood and the cowl panel. This is a correct reproduction of the original seal that includes...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1964-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Door Rubber Bumper Set, 4 Piece Set
OER® reproduction of the original door rubber bumpers designed for use on 1964-1986 C/K and 1987-91 R/V model Chevrolet and GMC pickup trucks. Each rubber stopper is designed to exact factory specifications for a perfect...
1955-76 Chevrolet Bel Air, 150, 210, Impala, Caprice; Fender Skirt Rubber Seal ; 120" Long; OER
Reproduction fender or quarter panel skirt rubber seal for various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment and appearance. Measures 120"...
1973-81 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Bumpers; 8 Piece Set
Reproduction of the original hood bumpers for 1973-81 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Manufactured in quality EPDM rubber to factory dimensions for an authentic appearance and fitment. Set...
Reproduction of the original outer door handle and door lock gasket set designed to properly seal and protect the exterior door handle and lock areas on various vehicle models. Each gasket is precision die-cut to factory...