1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Reproduction of the original fuel tank designed for use with 1974 Chevrolet Impala, Bel Air, and Caprice models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1973-77 Chevelle, Regal, Cutlass, LeMans; 19 Gallon Fuel Tank; w/o Filler Neck;
Reproduction fuel tank for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion...
Reproduction fuel tank for 1970-1974 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes filler...
1974-81 Chevrolet, GMC Suburban; Zinc Coated Fuel Tank; 40 Gallon Tank
Reproduction of the original fuel tank designed for various 1974-81 Chevrolet and GMC Suburban models. This fuel tank is made of zinc coated steel and measures 35" x 28 3/4" x 13 1/8". This fuel tank has a capacity of 40...
1973-81 Chevy, GMC Blazer, Jimmy, Suburban; Zinc Coated Fuel Tank; 31 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1973-81 Chevrolet and GMC Blazer, Jimmy, and Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for...
1973-91 Chevrolet, GMC Pickup Truck; Rear Fuel Tank Support Hanger; Bracket with Strap; Each
Reproduction fuel tank support hanger, bracket and strap for 1973-87 Chevrolet and GMC truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an original appearance...
1973-91 Chevrolet, GMC Pickup; Front Fuel Tank Support Hanger; Bracket with Strap; Each
Reproduction of the original rear fuel tank support hanger, bracket and strap designed for use with for 1973-87 Chevrolet and GMC truck models. Each support hanger is manufactured in quality stamped steel to original factory...
1973-79 Chevrolet, GMC Pickup; Fuel Tank Sending Unit; 3-Line; with Drivers Side Fuel Tank
Reproduction of the original fuel tank sending unit designed for use with 1973-79 Chevrolet and GMC pickup truck models with 3 line driver side fuel tank. After years of use, your fuel sending unit can wear out or stop...
1973-79 Chevrolet, GMC Pickup Truck; Fuel Sending Unit; 3-Line; Passenger Side Tank
Reproduction fuel tank sending unit for 1973-79 Chevrolet and GMC pickup truck models with 3 line passenger side tank. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause...
1973-79 Chevrolet, GMC Truck; Fuel Tank Sending Unit; LH Mounted Tank; 2 Outlets
Reproduction of the original fuel tank sending unit designed for use with 1973-79 Chevrolet and GMC pickup truck models with 2 outlets and drivers side fuel tank. After years of use, your fuel sending unit can wear out or...
1973-75 Chevrolet, GMC Truck; Fuel Tank Sending Unit; RH Mounted Tank; 1 Outlet
Reproduction of the original fuel tank sending unit designed for use with 1973-75 Chevrolet and GMC pickup truck models with a passenger side mounted fuel tank. After years of use, your fuel sending unit can wear out or stop...
Reproduction of the original fuel tank mounting straps designed for use with 1974-75 Camaro, Firebird, and 1973-75 Nova and GM X-Body models. Each strap is produced using heavy duty pre-formed steel for an original...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet, GMC truck models as listed. For use on all 1973-86 C/K truck models, and 1987-91 R/V series with 16 gallon or 20 gallon saddle...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1973-77 Chevelle, Regal, Cutlass, LeMans; Fuel Tank Filler Neck; 13-1/4" Long, 2" Diameter
Reproduction of the original fuel tank filler neck designed for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans models. Each neck is manufactured to factory dimensions and replaces the original...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1973-78 Chevrolet, GMC C/K Fleetside Truck; Vent Pipe Upper Hose; 5/8" I.D.
Reproduction vent pipe hose for 1973-78 Chevrolet and GMC C/K fleetside trucks. Measures 5/8" inside diameter, made of rubber, and fits on the LH side on 1973-78 models and the RH side on 1973-76 models. Replaces OE #'s...
1973-76 Chevrolet, GMC Stepside Truck; Fuel Filler Hose; RH Passenger Side
Reproduction fuel filler hose for 1973-76 Chevrolet and GMC Stepside truck models with RH side filler location. Each hose is manufactured to correct factory dimensions and replaces the old or corroded original hose. For use...
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet Blazer, Suburban, and, GMC Jimmy, Suburban models with 31 gallon fuel tank. Each strap is manufactured in quality stamped steel,...
1968-74 Chevrolet Corvette; Fuel Tank Mounting Straps; EDP Coated; Galvanized Steel; Pair
Reproduction fuel tank mounting straps for 1968-1974 Chevrolet Corvette models. Each strap is manufactured in stamped steel to original to factory specifications. Produced in zinc plated steel with a black EDP coating for...
Reproduction of the original fuel tank mounting straps designed for use with various 1973-77 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured with high strength corrosion-resistant stamped steel to factory...
1968-81 Corvette; Fuel Pump Return Hose
Replacement return hose for 1968-81 Corvette models. This 1/4" hose goes between the fuel pump and the tank.
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
1973-77 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Fuel Tank Vent Hose; 1/2" ID x 18" Long
Reproduction fuel tank vent hose for 1973-77 Blazer, Jimmy, and Suburban. This hose measures 18" long with a 1/2" inside diameter to fit the first design fuel filler necks with 1/2" vent pipe.
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1974-77 Camaro, 1974-1978 Firebird; Fuel Tank; with Fuel Neck; Stainless Steel; 21 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1974-77 Camaro and 1974-1978 Firebird models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering...
1974-77 Camaro; 1974-78 Firebird; NiTerne Coated Fuel Tank; 21 Gallon
Reproduction of the original style fuel tank designed for use with 1974-77 Camaro, and 1974-78 Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring an original Niterne...
Reproduction of the original style fuel tank designed for use with 1970-74 Impala, Bel Air, Biscayne, Catalina, Bonneville and GM full size station wagon models. This fuel tank is made of zinc-coated steel and has a capacity...
1973-1974 Apollo, Nova, Omega, Ventura; Ni-Terne Coated Fuel Tank; 21 Gallon Capacity
Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1973-74 Buick Apollo, Chevrolet Nova, Oldsmobile, Omega, Pontiac Ventura models. This OE-quality Ni-Terne coated reproduction stamped steel...
Reproduction of the original style fuel tank designed for use with 1974 Impala, Bel Air, and Caprice 2 and 4 door models (except station wagon). Each fuel tank is manufactured in quality stamped steel and zinc plated matching...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1973-74 Nova, Ventura, Omega, Apollo; Zinc Coated Fuel Tank; 21 Gallon
Reproduction of the original fuel tank designed for use with 1973-74 Chevrolet Nova, 1973-74 Pontiac Ventura, Olds Omega, and Buick Apollo models with Evaporative Emission Control (EEC). Each fuel tank is manufactured in...
1976-81 Camaro, Firebird, 1973-79 Nova, X-Body; Fuel Tank Sending Unit; with Return Line; 3/8" Line
Reproduction fuel tank sending unit for a variety of GM models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send...
1974-77 Camaro; 1974-78 Firebird; Zinc Coated Fuel Tank; 21 Gallon
Correct reproduction of the original fuel tank designed for with 1974-77 Camaro, and 1974-78 Firebird models. This reproduction fuel tank is manufactured in stamped steel featuring a zinc coating for dependability. Includes...
Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...
1973-75 Apollo, Nova, Omega, Ventura; Fuel Tank Sending Unit; 3/8" Single Fuel Line
Reproduction of the original fuel tank sending unit designed for use with 1973-75 Chevrolet Nova and GM X-body models with single 3/8 fuel line. After years of use, your fuel sending unit can wear out or stop working. When...
1973-81 Chevrolet, GMC Long Bed Pickup; Zinc Coated Fuel Tank; 20 Gallon
Reproduction of the original fuel tank assembly designed for use with 1973-81 Chevrolet and GMC long bed pickup truck models. Complete replacement gas tank assembly for 1973-81 Chevrolet and GMC trucks. The fuel tank is...
Reproduction of the original fuel tank assembly designed for use with 1973-81 Chevrolet, GMC Blazer, Jimmy, Suburban, and 1975-80 Pickupo truck models. Each tank is manufactured in stamped steel and zinc coated for long...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1963-74 Chevrolet Corvette; Fuel Tank Filler Neck; 1963-1967 Convertible; 1968-74 All
Reproduction of the original style fuel tank filler neck designed for use with 1963-1967 Corvette Convertible, and all 1968-1974 Chevrolet Corvette models. Features correct mounting holes that match the original GM neck....
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1973-78 Chevrolet, GMC Fleetside Truck; Fuel Filler Neck
Reproduction fuel filler neck for 1973-78 Chevrolet and GMC Fleetside truck models. Each filler neck is manufactured to original factory specifications for an authentic appearance and functionality. Comes complete with the...
1973-79 Chevrolet. GMC Pickup; Fuel Sending Unit; 2-Line; 16/20 Gallon Tank"; Passenger Side
Reproduction of the original fuel tank sending unit designed for use with 1973-79 Chevrolet and GMC pickup truck models with 2 line. 16-20 gallon tank. After years of use, your fuel sending unit can wear out or stop working....
1974-75 Camaro, Firebird ; Fuel Tank Sending Unit; 3/8" Single Line
After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...
1973-78 Chevrolet, GMC Stepside Pickup; Fuel Filler Neck Hose; LH Driver Side
Reproduction fuel filler neck hose for various 1973-78 GMC/Chevy models. Featurse correct size and contours. The dimensions are: 17.5" long X 1-3/8" ID hole X 1-5/8" OD hole. Applications: 1973-78 Chevy/GMC Stepside Trucks -...
1973-91 Blazer, Jimmy; Fuel Filler Neck Cover
Reproduction stamped steel cover to seal the passenger compartment where the fuel filler neck protrudes through the quarter panel on 1973-91 BVlazer and Jimmy models. This cover was designed by the factory to improve the...
1973-77 GM A-Body; Fuel Tank Sending Unit; with A/C; 3-Lines; Regal, Century, Chevelle, Laguna
Reproduction of the original fuel tank sending unit designed for use with 1973-77 GM A-body models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your...
Reproduction of the original fuel tank sending unit for use with various 1973-77 Regal, Century, Chevelle, Laguna, Malibu, Monte Carlo, etc. models as listed. These sending units will replace the old or worn out original...