Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Correct reproduction of the original fuel tank designed for with 1971-1976 Dart, Duster, Scamp, Valiant, Swinger models. This reproduction fuel tank is manufactured in stainless steel replicating the original Mopar tank...
1970-75 Dodge, Plymouth A, B, E Body; Fuel Tank Filler Neck Grommet
Reproduction fuel tank to filler neck rubber grommet to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction grommet to eliminate vapor or fuel...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1960-1976 Chrysler, Dodge, Plymouth; Fuel Tank Mounting Studs ; Pair; OER
Reproduction of the original style fuel tank mounting studs designed for use on various 1960-1976 Mopar models. Fuel tank mounting studs, also known as J-bolts, are required when replacing your fuel tank straps. Manufactured...
Reproduction of the original fuel tank designed for use with 1971-1976 Dodge Dart, Plymouth Duster, Scamp, Demon, Special, Swinger, and all A Body models with EEC (evaporative emission control). This reproduction fuel tank is...
Reproduction of the original style 18-gallon fuel tank designed for use with 1971-76 Dodge Dart, Plymouth Duster, Valiant, Scamp, and Demon models with single vent EEC (evaporative emission control). Each fuel tank is...
1962-76 Dodge, Plymouth; Fuel Sending Unit Ground Strap; 3-3/4" Steel
Reproduction of the original fuel tank sending unit ground strap designed for use with most 1962-76 Dodge and Plymouth A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1962-76 Dodge, Plymouth A, B, E Body; Fuel Sending Unit Rubber Seal; 2-1/4" ID
Reproduction of the original rubber fuel sending unit seal designed for use with 1962-76 Dodge and Plymouth A, B, and E Body models. Replaces original Mopar part number # 1948757. We suggest replacing this seal every few...
1967-76 Dart, Barracuda, Valiant, Duster; Vented Fuel Cap
Reproduction of the original fuel cap designed for use with 1967-76 Dodge Dart and Plymouth Barracuda, Valiant, Duster, Scamp, and Swinger models. Each cap is manufactured to factory specifications featuring a primer coating...
1968-76 Dodge, Plymouth A Body; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1968-76 Dodge and Plymouth A-Body models as listed below. Each strap is manufactured in quality stainless steel to original factory dimensions...
Reproduction of the original fuel tank mounting strap designed for use with 1968-1976 Dodge Dart, Dart Sport Plymouth Duster, Demon, Twister, Swinger, Barracuda, and Valiant models. Each strap is manufactured in quality...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1964-74 Dodge, Plymouth; Fuel Tank Filler Neck Grommet; Various Models
Reproduction fuel filler neck grommet for various 1964-74 Dodge & Plymouth models. Eliminate vapor or fuel leaks by replacing the fuel filler neck grommet. Manufactured from OE materials for long lasting fit and funcionality....
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
1963-76 Dodge, Plymouth; A-Body; Fuel Tank Sending Unit ; 5/16" Outlet
After years of use, your fuel sending unit can wear out or stop working which can cause significant issues with your fuel gauge. Ensure you always know how much fuel you actually have in the tank by replacing your worn out...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1963-76 Dodge, Plymouth A-Body; Fuel Tank Sending Unit; 3/8" Outlet with 1/4" Fuel Return
After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1962-76 Dodge, Plymouth A, B, E Body; Fuel Tank Sender Lock Ring and Rubber Gasket
Reproduction of the original style fuel sending unit lock ring and gasket designed for use with various 1962-1976 Dodge and Plymouth models as listed. Install the sending unit on your vehicle with the quality replacement...
1963-74 Dodge, Plymouth; Fuel Sending Unit; with 1/2" Outlet; 1/4" Fuel Return; Stainless Steel
Reproduction of the original fuel sending unit designed for use with 1963-74 Dodge and Plymouth A-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
1960-76 Mopar Fuel Tank Mounting Lock Nuts ; Pair
Reproduction fuel tank mounting lock nuts for various 1960-76 Mopar models. Sold in pairs. Zinc plated, 3/8" - 16, 9/16" outer. Fuel tank mounting studs (J bolts) sold separately. Use part# MM8271 fuel tank mounting studs....
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1971-74 Mopar Accelerator Pedal Pad Bezel ; Various Models ; Stainless Steel
Reproduction of the original accelerator pedal bezel designed for use on various 1971-72 Reproduction of the original accelerator pad bezel designed for use on Mopar A,B,C-Body and E-Body models. Each accelerator pedal bezel...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
1960-76 Chrysler, Dodge, Plymouth; Fuel Tank Stud and Lock Nut Set
Reproduction of the original style fuel tank mounting studs and lock nuts designed for various 1960-1976 Mopar models. Fuel tank mounting studs, also known as J-bolts, are required when replacing your fuel tank straps....
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1967-74 Dodge, Plymouth A-Body; Accelerator Throttle Cable; 383, 440; 18"; OER
Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth A body models with 383, 440 engines. Each cable is manufactured to correct factory specifications replicating the original...
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}