Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
Reproduction side mount gas tank for 1969-78 Ford F-100, F-150, F-250, F-350 Pickup Trucks without EEC. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 60 in. x 14...
Reproduction side mount gas tank for 1973-79 Ford F-100, F-150, F-250, F-350 Pickup Trucks with EEC. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 60 in. x 14 in....
1971-1973 Ford Mustang; Fuel Tank; Zinc Coated; F32A; 20 Gallon Capacity
Reproduction of the original style fuel tank designed for with 1971-1973 Ford Mustang models. This reproduction fuel tank is manufactured in stamped steel featuring a Zinc coating for rust and corrosion prevention. Tank...
1971-75 Ford Maverick, 1971-77 Mercury Comet: Fuel Tank Sending Unit
Reproduction of the original fuel tank sending unit for use with 1971-75 Ford Maverick and 1971-77 Mercury Comet. Manufactured to correct factory specifications in stainless steel and includes the gasket and filler sock....
1948-86 Ford; Fuel Tank Sending Unit Brass Float; Various Models
Reproduction of the original style and correct brass float for use with various 1948-86 Ford and Mercury models as listed below. This sending unit brass float is desirable for its long-lasting dependability as it lasts much...
Reproduction rear mount upper gas tank straps for 1973-1979 Ford F100, F150, F250, F350 trucks. Each strap is manufactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for rust and corrosion...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Reproduction rear fuel tank sending unit for 1973-79 Ford F100, F150, F250, F350 pickup truck models with aft fuel tank. This sending unit is designed and manufactured to factory specifications. Will replace the old or...
1973-79 Ford F100, F250, F350 Truck; Fuel Tank Sending Unit; Mid-Tank
Reproduction main gas tank fuel level sending unit for 1973-79 Ford F-100, F-250, F-350 truck models with mid-tank (Except 1974-79 Super Cab models). This sending unit installs in the original fuel tank mounted midship to the...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction rear fuel tank sending unit for 1973-84 Ford F100, F150, F250, F350 pickup truck models with aft fuel tank. This sending unit is designed and manufactured to factory specifications. Will replace the old or...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1966-96 Ford, Mercury; Lower Fuel Tank Filler Pipe Seal; Various Models
Reproduction of the original fuel tank to filler pipe seal designed for use on various1966-97 Ford and Mercury applications. Each seal is manufactured to correct factory specifications and replaces the old or missing original...
1966-76 Ford Bronco; Rear Main Fuel Tank Mounting Strap; Each
Reproduction of the original style side mount gas tank strap designed for use with 1966-1976 Ford Bronco models. Each strap is manufafactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for...
Reproduction rear mount lower gas tank straps for 1973-1995 Ford F100, F150, F250, F350 trucks. Each strap is manufactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for rust and corrosion...
1968-79 Ford ; Accelerator Pedal Trim; Stainless Steel; Various Models
Reproduction accelerator pedal pad trim manufactured to exact factory specifications featuring configuration and bright polished stainless steel finish. For various 1968-71 Ford car models and 1973-79 Ford truck models as...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1971-73 Ford Mustang; Gas Tank Kit; With Fuel Sending Unit; Niterne
OER Authorized niterne steel reproduction gas tank kit comes with fuel tank, sending unit retaining lock ring and o-ring gasket, fuel sending unit, fuel filler neck, filler neck hose, hose clamps, filler neck screws, tank...
OER Authorized reproduction fuel tank for 1972-73 Thunderbird, Lincoln Mark IV, and Montego models. Each tank is manufactured in quality stamped steel featuring a galvanized zinc coating for rust and corrosion resistance....
1971-73 Ford Mustang; NiTerne Coated Fuel Tank; 20 Gallon; F32A
OER Authorized reproduction of the original fuel tank designed for use with 1970 Mustang, and Cougar models. Each fuel tank is manufactured in quality galvanized stamped steel offering a precise fit. Features a NiTerne...
Reproduction rear / aft mount gas tank for 1973-79 Ford F-100, F-150, F-250, F-350 Pickup Trucks. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 34-3/4 in. x 27...
1966-77 Ford Bronco; Main Fuel Tank; 14-1/2 Gallon Tank
Reproduction main gas tank for 1966-77 Ford Bronco models. Each gas tank is manufactured to original factory specifications replicating the original in design, appearance and fitment. This direct replacement steel tank...
1966-76 Ford Bronco; Gas Tank Pipe Filler Guard Set
Reproduction gas tank filler pipe guard set for 1966-76 Ford Bronco. These panels install in the driver side inner quarter area and cover the filler pipe that extend through the bedfloor and out the quarter panel. They are...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1965-73 Ford Mustang; Screw Set; Gas Tank Mounting; 13 Piece Set
This 13 piece set contains all the mounting hardware needed to install your gas fuel tank. Each piece is factory correct. Screws and bolts are all fabricated from heavy-duty steel and coated to prevent any corrosion. Ford...
1971-73 Mustang, Cougar; Fuel Tank Sending Unit; 3/8"; 250ci, 302ci, 351ci
Reproduction fuel tank sending unit for 1971-73 Mustang and Cougar models with 250 6 cyl., 302, or 351C V8 engines. This is the most accurate reproduction of the fuel tank sending unit with original design that includes...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
1966-76 Ford Bronco; Fuel Tank Filler Pipe; For Auxiliary (side) Tank
Reproduction of the front auxiliary fuel tank filler pipe for 1966-76 Ford Bronco models. Replacing the filler neck is recommended whenever you replace your gas tank. This is where the gas cap attaches. After years of use and...
1971-73 Ford Mustang, Cougar; Fuel Tank Mounting Straps; OE Material; ST89; EDP Coated; Pair
Reproduction of the original fuel tank mounting strap designed for use with 1971-1973 Mustang and Cougar models. Each strap is manufactured in quality stamped steel with all correct contours for an authentic fitment and...
1966-76 Ford Bronco; Fuel Tank Sending Unit; Auxiliary Tank 3/8"; with Lock Ring and Seal
Reproduction of the original auxiliary gas tank fuel tank sending unit designed for use with 1966-76 Ford Bronco models. This sending unit installs in the forward fuel tanks. Includes lock ring, O-ring seal, and strainer....
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1966-1977 Ford Bronco; Auxiliary Fuel Tank Mounting Straps; Pair
Reproduction of the original style rear mount gas tank straps designed for use with 1966-1977 Ford Bronco models. Each strap is manufafactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for...
1966-76 Ford Bronco; Fuel Sending Unit; Rear Main Tank 3/8"; with Lock Ring & Seal
Reproduction of the original main fuel tank fuel level sending unit designed for use with 1966-76 Ford Bronco models. This sender installs in the rear main tank and will work with either stock steel or replacement poly fuel...
Reproduction side mount gas tank straps for 1973-1979 Ford F100, F150, F250, F350 trucks. Each strap is manufactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for rust and corrosion...
1960-97 Ford, Mercury; Fuel Tank Sending Unit O-Ring; Various Models
Our synthetic rubber fuel sending unit oring gasket seal is produced to be resistant to heat, oil and chemicals. Features superb elasticity and bonding capabilities to ensure that it will not lose its shape over time. Will...
1960-97 Ford, Mercury; Fuel Tank Sending Unit Retaining Lock Ring; Three Tab Style
Reproduction fuel sending unit retaining lock ring for various 1960-97 Ford & Mercury models. Each ring is manufactured in quality stamped steel for an original fit. Twists into place in the fuel tank to secure the sending...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
1968-79 Ford Car & Truck; Accelerator Pedal Pad; Various Models
Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, and grip pattern. For various 1968-71 Ford car models and 1973-79 Ford truck models as listed. Replaces Ford part #...
1966-1977 Ford Bronco; Fuel Tank J-Bolt Set; Each
Reproduction fuel tank J-Bolt with two nuts and a lock washer for 1966-1977 Ford Bronco models. Each j-bolt is manufafactured in stamped steel and chrome plated to correct factory dimensions. Sold individually.
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
Reproduction fuel tank filler neck for in-cab tanks on 1973-76 Ford F100, F150, F250, F350 pickup truck models. Each filler neck is manufactured in quality stamped steel featuring zinc plating with black EDP coating for...
1973-79 Ford F-100, F-150, F-250, F350; Fuel Tank; 38 Gallons; With Roll-Over Valve Hole; F26B
Rear Mounted 38 Gallon Steel Gas Tank for Ford F-Series Pickup. This tank is the basis of a popular conversion. May require sending unit modifications to lengthen pick-up tube because of the added depth of the tank. Often...
1964-73 Ford/Mercury; Fuel Tank Filler Pipe Neck To Body Gasket
Reproduction of the original gas tank filler neck gasket for 1964-73 Mustang and 1967-68 Cougar models. The fuel tank-to-body gasket will ensure a leak free seal between your filler neck and gas tank. Replaces OE # C5ZZ-9076....
1970-73 Ford Mustang; Hex Head Screw Set; For Fuel Filler Neck; 5 Piece Set
Reproduction fuel filler neck screw kit. Each 5 piece screw kit includes the hex head screws that are required to mount the fuel filler neck to the tail lamp panel on 1964-69 Mustang models. Ford Applications: 1970-73 Ford...
1973-78 Ford F-100, F-150, F-250, F350; Fuel Tank; 38 Gallons; Without Roll-Over Valve Hole; F26A
Rear Mounted 38 Gallon Steel Gas Tank for Ford F-Series Pickup. This tank is the basis of a popular conversion. May require sending unit modifications to lengthen pick-up tube because of the added depth of the tank. Often...
1971-77 Ford/Mercury; Fuel Filler Pipe To Trunk Floor Rubber Seal; Various Models
Reproduction of the original fuel tank pipe to trunk floor seal for various models including 1971-73 Mustang and Cougar. This OE type seal replaces the worn out or deteriorated original on the tank side of the fuel filler...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1961-77 Ford F100, F150, F250, F350 Pickup Truck; Fuel Tank Sending Unit; with Gasket, Float
Reproduction of the original main gas tank fuel level sending unit designed for use with 1961-77 Ford F-100, F-250, F-350 truck models. This sending unit installs in the original fuel tank inside the cab. Includes gasket and...
1971-73 Ford Mustang; Gas Tank To Filler Pipe Rubber Seal
This is the round seal that fits between the fuel tank and the filler pipe on a 1971-73 Mustang and various other Ford and Mercury models. Designed for use on the original gas tank and filler pipe. If a reproduction fuel tank...