Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...


Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...


Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...


Product#: *MM1728A

1973-74 Dart Sport//Duster; Glass Set; Clear

This comprehensive glass set for 1973-74 Dodge Dart Sport / Plymouth Duster 2 door coupe models features CLEAR (untinted) glass without date coding or original markings. Set includes: Windshield LH and RH 5 hole* Door Glass...


Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...


Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...


Product#: MM1143

1970-74; Challenger, Barracuda, Cuda; Hood Hinges; with Springs; Pair

Reproduction of the original 1973 All Makes All Models hood hinges designed for 1970-74 Mopar E-body models. Each hood hinge is manufactured to exact factory specifications and includes OE style hood hinge springs. Get your...


Product#: 3819074

1958-80 TRICO RF-15 Style Wiper Blade Refill; 15" Length; Reproduction; Various Models

OER® reproduction of the original Trico RF-15 wiper blade insert/refill for 15" TRICO wiper blades. This period-correct TRICO RF-15 style insert is made with a stainless steel vertebra and a precision wiping edge produced...


Product#: K51020

1962-76 GM, Dodge, Plymouth; Various Models; Convertible Top Boot Vinyl Storage Bag

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot vinyl storage bag. The storage bag will help protect your vehicles top boot while being stored in...


Product#: 153391

1966-84 Wiper Blade; 16" Anco Style; 1/4" Bayonet Connector; Polished Stainless; Each

Reproduction 16" wiper blade assembly manufactured to factory specifications, featuring a bright polished stainless steel finish and premium wiper insert. Fits 1/4" bayonet end wiper arms. Sold individually. Product...


Product#: MD2207

1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side

Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...


Product#: MM1006

1973-74 Dodge Challenger; Front Bumper; With Jack Slots; Chrome; OER Premier; Show Quality

OER Premier chrome bumper for 1973-74 Dodge Challenger models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating that...


Product#: 11503957

U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each

Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...


Product#: *MM1895

1971-74 Dodge/Plymouth; B-Body; Door Hinge Set; 4 Piece Set

The doors on 1971-74 Dodge and Plymouth B-Body models were extremely heavy and hard on original hinges. Each hinge is manufactured to correct factory specifications that replicate the original in fitment, quality and design....


Product#: 2802710

1967-74 Dodge, Plymouth; A, B-Body; Outer Door Mirror; Single Post; with Hardware; RH or LH; Each

Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...


Product#: *881234

1970-73 Duster, Dart, Valiant, Scamp, Demon; Outer Door Sport Mirrors; Pair

Reproduction of the original style Sport outer door mirror designed for use with 1970-73 Dodge and Plymouth A body models equipped with the remote style sport mirror option. Pair includes the drivers side remote mirror, and...


Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...


Product#: MD2701

1970-76 Dodge Dart, Duster, Valiant; Rallye Sport Outer Door Mirror; Primer; LH Driver Side

Reproduction Rallye outer door mirror for 1970-76 Dodge, Plymouth A-body models. Each mirror is manufactured to correct factory specifications and offered in primer. Paint as required. Fits the LH driver side. {fitment}


Product#: K164

Windshield Wiper Blades; Aero Style; 15"; for 1/4" (7mm) Bayonet Style Arms; Pair; Various Models

High quality reproduction of the stainless steel "Aero" Anti Wind-Lift Wiper Blades designed to fit 7mm wide bayonet style wiper arms. Popularized in the 1960's and 70's to combat wind lift at high speeds, these 15 inch wiper...


Product#: DB4427T

1970-74 Dodge Challenger; Back Window Glass; 2 Door; Hardtop; Tinted; 18" x 54"; except SE models

Reproduction of the original door vent glass designed for use with 1970-74 Dodge Challenger coupe models (except SE models). Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace...