1973-80 Chevy Pickup, Blazer, Jimmy, Suburban; Front Bumper; Chrome; w/o Impact Strip Holes
OER® Authorized reproduction of the original chrome front bumper designed for use with 1973-80 Chevrolet and GMC truck models. This quality reproduction ftont bumper is manufactured to factory specifications featuring a...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1973-84 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Windshield Wiper Arm; RH or LH; Each
OER® Authorized reproduction bayonet style windshield wiper arm for all 1973-84 Chevrolet & GMC truck models including Suburban, Crew Cab, Blazer, and Jimmy. Each wiper arm is manufactured to OE factory specifications in...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Spring; Each; Made in the USA!
Correct reproduction of the original hood hinge spring designed for use on 1973-80 Chevrolet and GMC truck models. Each spring is manufactured to OE specifications and features the correct tension ratio, offering the highest...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1973-91 Chevrolet, GMC Suburban; Rear Tailgate Glass Window; Tempered; Clear
Reproduction of the original back window glass for 1973-91 Chevrolet and GMC Suburban models with a rear tailgate. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace your missing,...
1973-91 Chevrolet, GMC Suburban; Rear Tailgate Glass Window; Tempered; Light Green Tint
Reproduction of the original back window glass for 1973-91 Chevrolet and GMC Suburban models with a rear tailgate. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace your missing,...
1973-80 Fleetside, Suburban, Blazer, Jimmy; Rear Bumper; Black Powdercoat; w/o Impact Strip Holes
Reproduction of the original chrome rear bumper designed for use with 1973-80 Chevrolet and GMC Fleetside pickup trucks, Chevy Blazer, GMC Jimmy, and all Suburban models. Each bumper is manufactured to original factory...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; LH Driver Side
Reproduction of the original hood hinge assembly for 1973-80 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Each hood hinge is manufactured from quality stamped steel assuring a quality replacement. This hood...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
Reproduction of the original style low mount outer door mirror for 1973-87 Chevrolet and GMC Pickup, Blazer, Jimmy and Suburban models. The stainless steel mirror head measures 9" x 6-1/2". Fits left hand (driver side) or...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models without a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models without a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
1967-91 Chevy, GMC Pickup, Blazer, Suburban; Bracket; License Plate; Rear; Chrome Plated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1973-91 Chevrolet Blazer/GMC Suburban; Tailgate Window Crank Handle Assembly
OER® Authorized reproduction of the original style tailgate window crank handle designed for use with 1973-91 Chevrolet Blazer and GMC Suburban models. Designed and manufactured in quality die-cast to original...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Zinc plated tapping screw is needed. Sold individually.
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
1967-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear License Plate Bracket; EDP Coated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1973-91 Chevrolet, GMC Suburban; Rear Cargo Door Glass Window; Clear; RH; Passenger Side
OER reproduction of the original rear cargo door window glass for all 1973-91 Suburban models with rear "swing-open" style cargo doors. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material....
1973-91 Chevrolet, GMC Suburban; Rear Cargo Door Glass Window; Clear; LH; Drivers Side
OER reproduction of the original rear cargo door window glass for all 1973-91 Suburban models with rear "swing-open" style cargo doors. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material....
1973-91 Chevy, GMC Suburban; Rear Cargo Door Glass Window; Tinted; RH; Passenger Side
OER reproduction of the original rear cargo door window glass for all 1973-91 Suburban models with rear "swing-open" style cargo doors. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material....
1973-91 Chevy, GMC Suburban; Rear Cargo Door Glass Window; Tinted; LH; Drivers Side
OER reproduction of the original rear cargo door window glass for all 1973-91 Suburban models with rear "swing-open" style cargo doors. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material....
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
Correct reproduction washer pump for various 1973-1984 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models. Each pump is engineered to match original equipment washer pump in functionality, fitment, and cosmetic...
Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1973-91 Chevy, GMC; Suburban & Crew Cab; Rear Door Vent Glass; Clear; LH Driver Side
Reproduction of the original style small vent window glass located on the rear door for 1973-86 Chevrolet and GMC C/K Suburban, Crew Cab, and 1987-91 Chevy or GMC R/V Crew Cab 4-door pickup trucks and 1973-91 Chevy, GMC...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1973 Chevy, GMC C10, Blazer, Jimmy, Suburban; Manual Front Window Regulator; LH Drivers Side
OER® Authorized reproduction of the original manual door window regulator designed for use on 1973 Chevrolet and GMC truck models. Each regulator is manufactured to factory specifications replicating the original in...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1973 Chevy, GMC C10, Blazer, Jimmy, Suburban; Manual Front Window Regulator; RH Passenger Side
OER® Authorized reproduction of the original manual door window regulator designed for use on 1973 Chevrolet and GMC truck models. Each regulator is manufactured to factory specifications replicating the original in...
Reproduction of the original door vent glass designed for use with 1973-79 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Replacing your original glass will eliminate any scratches, chips, or cracks the...
5/16" X 18 X 1-1/4" Hex Washer Head Spin Lock Bolt; Phospate Coating
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
1973-91 Chevrolet/GMC Suburban; Rear Barn Door Handle; RH
Reproduction rear barn door handle for 1973-91 Chevy & GMC Suburban models with barn door. Manufactured to factory specifications featuring original style chrome plating and correct black push button. {specs} {fitment}
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Bright Finish
Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with bright finish face finish, two generic logo keys, cylinder...
1973-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Exterior Door Handle; Black; RH Passenger Side
Reproduction outer door handle for 1973-86 Chevrolet and GMC C/K pickup, 1987-91 R/V Pickup, and 1973-91 Blazer, Jimmy, and Suburban models. This beautiful, black powder coated reproduction is perfect for any early...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
Rear channel guide for the front door glass on 1973-86 C/K and 1987-91 R/V truck and SUV models. Installed at the rear of your door, this stamped steel window run channel guide holds the door glass run channel weatherstrip,...
Reproduction hood lock catch support or striker plate for 1967-80 Chevrolet and GMC trucks and SUV models (without inner cable-operated hood release). Each support is produced in stamped steel with the threaded nut welded in...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel