1986-87 El Camino, Caballero; Door Shell; LH
Reproduction LH door shell for 1986-87 Chevrolet El Camino and GMC Caballero models. Manufactured in stamped steel to factory specifications, this door shell replicates the original design for proper fit, strength, and OE...
This is an 8 piece reproduction of the trunk floor pan with braces and fuel tank braces for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is...
1973-77 Chevelle, Malibu, Cutlass, Regal; Trunk Floor; 3 Piece Set
Restore structural integrity and originality with this 3-piece reproduction trunk floor pan designed for 1973-77 GM A-body models. Manufactured in quality stamped steel, each panel is built to the correct OE configuration to...
Reproduction of the driver side front partial section of the floor pan with toe board for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is...
Reproduction full-length front floor pan support brace for 1973-77 Chevelle, El Camino, Monte Carlo, Sprint as well as 1973 Pontiac GTO and LeMans models. Manufactured from quality stamped steel to factory specifications,...
Reproduction of the right hand passenger side trunk floor pan for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is manufactured in quality...
Reproduction of the left hand driver side trunk floor pan for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is manufactured in quality...
1973-77 Chevrolet Chevelle, Malibu, Oldsmobile Cutlass, Buick Regal; Trunk Floor Pan; Center
Reproduction of the center trunk floor pan for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan is manufactured in quality stamped steel to the...
Reproduction fuel tank mounting brace (also referred to as trunk floor brace) for 1973-77 Chevelle, El Camino, Monte Carlo, Cutlass, and Sprint models, as well as 1973 Pontiac GTO and LeMans. Manufactured in stamped steel to...
Reproduction full-length center floor pan support brace for 1973-77 Chevelle, El Camino, Monte Carlo, Sprint as well as 1973 Pontiac GTO and LeMans models. Manufactured from quality stamped steel to factory specifications,...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"
Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...
Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....
Reproduction of the passenger side front partial section of the floor pan with toe board for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each floor pan...
Reproduction full-length rear floor pan support brace for 1973-77 Chevelle, El Camino, Monte Carlo, and Sprint, as well as 1973 Pontiac GTO and LeMans models. Manufactured from quality stamped steel to factory specifications,...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"
Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
OER® Professional Grade; Black Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER Professional Grade; Weld-Thru Galvanizing Spray Coating; Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz)
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). Perfect for...
OER® Gray Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Gloss Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Flat Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Gray High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade Gray Weld-Thru Galvanizing Spray Coating Case of 6 - 16 Oz Aerosol Cans
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Perfect for application on the inside of newly installed panels...
OER® Dark Gray High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® High Solids Stainless Steel Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER Professional Grade Red Oxide Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 17...
OER® Gloss Black High Solids Detail Coating 16oz Net Weight
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Green Zinc Phosphate Primer; 16 Oz. Aerosol Can (Net Wt 12 Oz)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER® Professional Grade; Red Oxide High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Red Oxide Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade; Gray Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 15 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 15...
OER® Professional Grade Green Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Professional Grade Yellow Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Gray Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Red Oxide Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Wrinkle Finish Paint Case of 6 - 16 Oz Aerosol Cans
Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...
OER® Aluminum High Solids Detail Coating Case of 6- 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® High Solids Stainless Steel Detail Coating 16 Oz Net Weight Aerosol Can
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Yellow Zinc Phosphate Primer; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER High Solids Coating Aerosol; Aluminum; 20 Oz Aerosol Can (Net Wt. 16 Oz.)
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...
Ford, Lincoln, Mercury; Floor Pan Metal Plug; Each; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Can be used as a...
Nylon Retainer Clip; Push-In; 11/16" Head Diameter; 5/16" Stem Diameter; 13/16" Stem Length; Black
Black nylon retaing clip that pushes into a 5/16" hole to install and secure various components OEM Part Number Cross Reference: GM: 11569768, 15958694, 1605396 Chrysler: 6030441 Ford: 388577S, W705589-S300 Specifications:...
OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
OER® Rubberized Undercoating Case of 6 - 20 Oz Aerosol Can
This OER® black rubberized undercoating is for use on automotive under surfaces. Sprays evenly, dries completely to a smooth consistency and can be top-coated with any type of automotive finish. Benefits: Prevents rust...
OER High Solids Detail Coating; Dark Gray; 20 Oz Aerosol Can (Net Wt. 16 Oz.)
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...
Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER
After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...
OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...
OER Gray and White Trunk Refinishing Kit with Standard Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....
OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
OER High Solids Coating Aerosol; Flat Black; 20 Oz Aerosol Can (Net Wt. 16 Oz.)
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...
OER® Rubberized Undercoating; 20 Oz Aerosol Can (Net Wt. 18 Oz.)
This OER® black rubberized undercoating is for use on automotive under surfaces. Sprays evenly, dries completely to a smooth consistency and can be top-coated with any type of automotive finish. Comes in a 20 Oz. Aerosol...
Black OER® Wrinkle Finish Paint; 16 Oz. Aerosol Can (Net Wt. 12 Oz.)
Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...
OER Underhood Detail Paint; Dark Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Underhood Detail Paint is a durable underhood coating used for detailing underhood items like hood hinges, safety and hood latch assembly, carburetors, pulleys, accelerator and transmission linkage, nuts, bolts,...
Reproduction of the retainer that pushes into a 5/16" hole to install various componants. Manufactured to fit and function as original. OEM Part Number Cross Reference: GM: 11569768, 15958694, 1605396 Chrysler: 6030441 Ford:...