OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...
1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER
Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...
1964-74 Dodge/Plymouth A, B, E-Body; Trunk Weatherstrip; With Y Profile
Reproduction of the original trunk weatherstrip designed for use on various 1964-1973 Mopar A, B and E-Body models. Each trunk weatherstrip is designed in a Y profile configuration matching the original in fit and appearance....
1962-78 Dodge/Plymouth A, B & E-Body; Hood Adjust Bumper
Factory style replacement hood adjust bumper for 1962-78 A, B and E-Body models. Designed to factory specifications and manufactured in rubber to correctly replace the hood adjust bumper. This bumper features a 1-1/4" outer...
1960-76 Dodge, Plymouth A, B, C-Body; Trunk Weatherstrip; OER
Reproduction of the original rear trunk weatherstrip designed to fit a variety of 1960-76 Chrysler, Dodge, and Plymouth. Each trunk weatherstrip is manufactured in durable EPDM rubber material in the correct configuration...
1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)
Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...
1972-74 Plymouth A-Body Rubber Bumper Set
Factory-style reproduction rubber bumper set for 1972-74 Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove b ox bumpers Trunk bumpers Fuel door...
1937-87 GM; Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required. Precision-molded from quality EPDM rubber to replicate the original plug size, shape, and material, this...
1967-74 Chrysler, Dodge, Plymouth; A, B, C Body; Front Door Glass Channel Seals; with Clips; Pair
Reproduction front door glass channels for 1967-74 Dodge and Plymouth A-Body, and 1966-70 B-Body and C-Body models as listed. These front door glass seals attach to the front of each door window in order to allow the glass to...
1962-70 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each
Factory-style reproduction of the rubber door bumper that mounts to the door on 1962-70 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...
1967-72 Dart, Barracuda, Duster, Valiant; Door Frame Weatherstrip, 2 Door Coupe, Hardtop, Pair
Reproduction door frame weatherstrips seals for 1967-72 Dodge and Plymouth A-body 2-door models. Each door weatherstrip seal is manufactured from premium quality EPDM molded rubber replicating the original in design and...
1967-74 Dodge/Plymouth A-Body; Rubber Bumper Set
Factory-style reproduction rubber bumper set for various 1967-74 Dodge & Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove box bumpers Trunk...
1968-74 Dodge/Plymouth A, B & E-Body; Hood Side/Trunk Rubber Bumper; 7/8" X 7/8"
Factory-style replacement hood side stop and trunk bumper for various 1968-74 Mopar A, B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper. Sold individually.
1971-79 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each
Factory-style reproduction of the rubber door bumper that mounts to the door on 1972-79 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...
1971-74 Dodge/Plymouth A-Body; Hood Side Rubber Bumper
OER reproduction hood side rubber bumper for the various 1971-74 Dodge and Plymouth A-Body models listed. Designed to factory specifications to correctly replace the hood stop bumper. Sold individually. Applications: 1971-74...
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1960-76 Dodge/Plymouth; Rubber Body and Trunk Plug; 1-7/8"; Each
Reproduction of the original style body and trunk rubber plug designed for use on most 1960-76 Dodge or Plymouth models where a 1-7/8" hole plug is required. Manufactured in quality rubber material for an original appearance,...
1967-76 Dodge/Plymouth A-Body; Hood To Cowl Seal; With Clips
Reproduction of the original hood to cowl seal weatherstrip for use on 1967-76 Mopar A-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....
Glass Seal Rope-In Tool; for Rubber Gasket Set Glass
Use the rope in tool when working with rubber gasket set glass. The unique counter-grip plastic handle injects the rope through its stem as it is pulled around the gasket. There is plenty of enough durable rope to fit around...