Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1970-72 Oldsmobile Cutlass, 1970-71 442; Template Kit; Fender & Trunk Lid/Decklid
This is a fender and trunk lid emblem template kit to position 442 and W-30 emblems on the driver and passenger side fenders and trunk lid on 1970-72 Cutlass and 1970-71 442 models. It is a full decal that gets attached to...
Reproduction Rocket emblem for the front stoneshield panel on all 1972 Cutlass, F85, Cutlass Supreme, and Vista Cruiser models. This emblem fits on the stoneshield panel between the two grills on the front end of the vehicle....
1970-72 Oldsmobile Cutlass, 1970-71 442; Fender Emblem; W-30
Reproduction W-30 fender emblem for 1970-72 Cutlass and 1970-71 442 W-30 models. These emblems are chrome with inlaid black trim highlights an a black background. Sold individually.
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-1974 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Blue; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1967-74 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
1969-72 Oldsmobile Cutlass, 1969-71 442; Trunk Emblem Set; 442 Chrome & Black
Reproduction trunk/decklid emblem set for 1969-72 Cutlass and 1969-71 442 models. These emblems are a three piece set of individual numbers and are chrome with inlaid black pinstriped outline. Sold as a set.
1972 Oldsmobile Cutlass; Nose Emblem; Rocket
Reproduction front nose emblem set for use on 1972 Oldsmobile Cutlass models. This is the Rocket emblem mounts on the front nose between the grills it has a chrome Rocket with black background and chrome trim. Sold...
1969-73 Oldsmobile 442; Fender Emblem Set; 442
Reproduction fender emblem set for 1969-72 Cutlass and 1969-71 442 models. Thses emblems are a three piece set of individual numbers. Sold as a set.
1971-77 Oldsmobile Cutlass; Die-Cast Fender Emblem; Cutlass Script
Reproduction Cutlass nameplate fender emblem. This emblem fits on left or right side on the front fender. Zinc die-cast emblem features chrome plated Cutlass script for an original factory appearance. Fits: 1971-77 Oldsmobile...
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...