Reproduction '621' 11" bellhousing kit for various models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For Chevrolet big block or small block engines equipped with an 11" clutch. Replaces original GM...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
Turbo 350; Transmission Dipstick And Tube; 27" Long
This chrome plated dipstick with tube for the GM turbo hydromatic 350 transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper...
Universal Frame Mount Manual Brake Pedal Bracket Assembly; GM Booster Style; Under Floor Mount
Universal frame mount brake pedal assembly for GM style brake booster with 4 bolt 3-3/8? center. For automatic transmission equipped, left hand drive hot rod and truck models. Great for under the floor, frame mount...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
Powerglide Transmission Dipstick; Firewall Mount; Flexible; Stainless Steel
You will have flexibility with this transmission dipstick designed for use with GM Powerglide transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. Each...
Reproduction speedometer cable and casing for 1958-68 GM models with screw-on style cable at both ends. Thread sizes are 7/8-18 female on one end and 5/8-18 female on the other. Each cable is manufactured to exact OE...
Reproduction speedometer cable for various 1958-68 GM applications with automatic transmission including Impala, GTO, Camaro, Skylark. This cable is a screw on type at both ends and is 57" long. If the speedo isnt working or...
1964-72 GM Models; Clutch Fork; 6 or 8 Cyl; Original Design; 10-3/8" Long
Manufactured to meet or exceed all original OEM specifications. Correct for small or big block. Exact replacement. Unlike others offered, ours functions perfectly for listed applications. GM Group #: 0.795 GM Part #: 3892632....
1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length
This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...
1964-1990 Buick, Chevy, Pontiac, Olds; Speedometer Cable; 69"; Push-On Style; OER
Reproduction of the original speedometer cable designed for use with various 1964-1990 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. This reproduction speedometer cable is manufactured to original GM...
1968-75 Camaro, 1968-76 Nova, 1970-75 Firebird; Transmission Kickdown Cable; Auto Trans; 6 Cyl.
OER® reproduction of the original transmission kickdown control cable designed for use with various 1968-77 Buick, Chevrolet, Pontiac, and Oldsmobile models with TH-350 automatic transmission with 6 cylinder. Each cable...
1964-83 Chevrolet; Bell Housing; High Performance; 11"; Aluminum; Standard Duty
Reproduction of the original '621' 11" bellhousing for various 1964-83 Chevrolet models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For big block or small block engines equipped with an 11" clutch....
GM TH350/400 Transmission Dipstick; Flexible Firewall Mount; 27" Long
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
Lower Clutch Push Rod ; Various GM Models
OER® reproduction of the original lower clutch push rod adjustor designed for use on various GM models. This push rod is manufactured to original specifications and includes the swivel. Will replace any original non...
1967-1979 GM; Torque Converter Cover; Turbo 350; For Starter Mounted on RH Driver Side
Reproduction torque converter cover (also called a flexplate/flywheel cover) for various 1967-79 GM vehicles with TH350 transmissions and a 153 tooth flex plate. Each cover is manufactured in injection molded ABS replicating...
Speedometer Cable and Casing; For Clip Retained on Speedometer Side; Push-On Style; 46" Long
Reproduction speedometer cable and casing for 1969-later GM models with clip-on style cable end at the speedometer end. Each cable is manufactured to exact OE specifications. Features correct fittings with clip on style...
1962-79 GM; Flywheel Clutch Housing Cover; for 10-1/2" Bellhousing; Manual Trans; OER
Correct flywheel / clutch cover plate designed for various 1962-79 GM models. Each cover is manufactured in quality stamped steel for an authentic replacement. This cover is located on the bellhousing and is used to cover the...
Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set
Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
1962-83 GM Clutch Fork Boot; 3-1/2" x 2-5/8"
OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...
1958-75 Clutch Bellcrank Felt Seals ; Pair
OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...
Reproduction clutch bell crank (Z-bar) pivot stud seat retaining clip for various 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. This clip installs on the frame side pivot stud...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat for various 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. This precision-molded nylon insert installs into the...
1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...