Universal 9" Windshield Mount Rear View Mirror; Polished Ball Milled Billet Aluminum
Add a custom look to the interior with this fully polished and machined billet aluminum inner mirror. Since you spend most of your time inside your vehicle, why not get rid of your cheap looking original mirror and replace it...
1968-77 GM; Window Crank Handle; Riveted Design; with Black Knob; Various Car & Truck Models
OER® reproduction window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile car and truck models. Manufactured in die-cast zinc featuring a chrome finish and a black knob that replicates the...
1968-77; GM Cars and Trucks; Window Crank Handle With Clear Knob; Riveted Design
OER® reproduction of the original window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. Manufactured in die-cast zinc featuring a chrome finish and a clear knob that replicates the...
1967-72 Buick, Chevy, Pontiac, Olds; Front Seat Belt Anchor Bolt; ; 1/2-13 Coarse Thread
When it comes to seat belt bolts, OE-quality hardware manufactured to DOT standards is essential. This exact reproduction seat belt bolt is designed to replace the original front seat belt bolt precisely, making it the...
1968-72 GM; Various Models; Door Lock Knob Ferrules; Narrow; Pair
Reproduction door lock knob ferrules for various pre-1973 GM models. Manufactured to correct factory specifications, each ferrule replaces the original exactly. Unlike other replacement ferrules on the market that have a...
1967-72 GM; Inner Seat Belt Anchor Bolt; Front; 1/2-13 Coarse Thread; With 1/2" Shoulder
When it comes to seat belt bolts, OE-quality hardware manufactured to DOT standards is essential. These exact reproduction seat belt bolts are designed to replace the original hardware precisely, making them the perfect...
Reproduction center console kit for 1970-72 Chevrolet Chevelle, El Camino, and 1971-72 GMC Sprint models equipped with an automatic transmission. Manufactured to factory specifications, this console kit accurately replicates...
1968-72 Chevelle, El Camino; 1971-72 Sprint; Center Console Kit; Models with a Manual Transmission
Reproduction center console kit for 1968-72 Chevrolet Chevelle, El Camino, and 1971-72 GMC Sprint models equipped with a manual transmission. Manufactured to factory specifications, this console kit accurately replicates the...
1955-1980; GM, Chrysler, Ford; Seat Belt Retractors; Pair
Reproduction of the original seat belt restractors designed and installed on many early GM, Chrysler, and Ford models. Seat belt retractors were a dealer option designed to be easily installed in applications not originally...
1965-91 Buick, Chevrolet, GMC, Oldsmobile; Horn Contact and Horn Cap Mount
Reproduction horn cap mount and horn contact assembly for various GM models equipped with the woodgrain steering wheel, or comfort grip (cushion style) steering wheels. Each horn contact is manufactured to original factory...
Door Jamb Vinyl Windlace ; Black ; Snap On Double Lip Style ; 20 Foot Roll
This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...
1969-77 GM; Comfort Grip Cushioned Steering Wheel; 3-Spoke; Silver Spokes; 15" Diameter; Black Grip
Reproduction of the original style 3-spoke Comfort Grip steering wheel (GM option NK1) for use with various 1969-72 Chevrolet models and 1969-77 Buick models including Camaro, Impala, Caprice, Corvette, Regal and more. Can...
1971-81 Horn Button Cap Retainer; 4 Spoke Steering Wheel; with NK4; Various GM Models
Reproduction horn button cap retainer for various GM models equipped with the optional NK4 4-spoke sport steering wheel. This retainer is used to mount the horn cap (part # 459003) to the steering wheel. For us on the various...
1930-2010 Snap-On Windlace; Double Lip Style; Bright Blue; Sold by the Foot; Universal Style
This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...
1969-72 Chevrolet Camaro, Impala, Chevelle; Nova; 14" Cushion Grip; Steering Wheel Kit
This is a new reproduction sport cushion grip 14" steering wheel kit for various Chevrolet models. Our wheel features the correct pebble Madrid grain cushion grip and brushed stainless steel spokes. Fits 1969-72 Chevelle, El...
Classic styling meets sports car design with this unique custom steering wheel. Each wheel features a thick padded leather grip for driving comfort and a classic center spoke design that is reminiscent of the optional sport...
Reproduction center console base for 1968-72 Chevrolet Chevelle, El Camino, 1970-72 Monte Carlo, and 1971-72 GMC Sprint models. Manufactured to factory specifications, this console base replicates the original design for...
1970-1981 GM; Glove Box Lock Assembly; Various Models
Reproduction of the original glove box lock assembly designed for use on various GM models including 1970-81 Camaro, 1972-81 Firebird, and 1973-74 Chevy / GMC truck models as listed. Each assembly comes complete with hooks,...
1969-72 Buick, Chevrolet, Oldsmobile; Inner Rear View Mirror 12" ; Various GM A, B Body Models
OER reproduction of the original 12" day/night mirror originally installed in various GM A and B body models including 1969-70 Impala, and 1969-72 Chevelle models (without built in map light). Superb quality reproduction of...
Reproduction kick panels for 1968-72 Chevelle, GTO, Tempest, LeMans, Grand Prix, Skylark, 442, and Cutlass models, as well as 1970-72 Monte Carlo. Designed for vehicles originally equipped without factory air conditioning,...
1970-72 Camaro; Console Door Assembly; with Pre-Assembled Button and Latch
Reproduction of the original console lid designed for use on 1970-72 Camaro, Chevelle, and El Camino models with a floor console. Manufactured from original materials in the correct grain, each console lid is designed and...
1968-72 Impala, Nova, Front Bucket Seat Belt Assembly; w/Retractor Standard; Black; LH
OER® reproduction of the original front bucket seat belt for use with various GM models including Impala, Caprice Bel Air, Nova, Chevelle, Monte Carlo, GTO, Catalina, Bonneville and more. Each seat belt features the seat...
1968-72 Front Bucket Seat Belt Assembly; RH; Standard; Silver Starburst Blue Button; Black Belt
OER® reproduction of the original front bucket seat lap belt featuring the correct retractor, seat belt, buckle assembly and housing for standard interior models. Each seat belt is designed to be installed on models with...
1930-2010 Snap-On Windlace; Double Lip Style; Dark Red; Sold by the Foot; Universal Style
This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...
1969-77 GM; Comfort Grip Cushioned Steering Wheel; 3-Spoke; Silver Spokes; Saddle Grip
Reproduction of the original style 3-spoke Comfort Grip steering wheel (GM option NK1). Manufactured to OE specifications as original featuring correct 3-spoke design and saddle cushioned grip 15" steering wheel. This 3-spoke...
1969-72 GM; Comfort Grip Cushioned Steering Wheel; 3-Spoke; Silver Spokes; Blue Grip
Reproduction of the original style 3 spoke cushion grip steering wheel which was optional in all 1969-70 Chevrolet full size models and widely used in a variety of other GM makes and models. Manufactured to OE specifications....
Replacement style custom 3-spoke Comfort Grip cushioned steering wheel designed for use with various 1969-1972 Chevrolet models with GM option NK1. Designed to replicate the original wheel with custom black powder coated...
1930-2010 Snap-On Windlace; Double Lip Style; Bright Red; Sold by the Foot;; Universal Style
This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...
1971-88; Chevrolet, GMC, Pontiac; Steering Wheel Horn Cap
OER® reproduction horn cap for a wide variety of GM models equipped with the optional NK4 4-spoke sport steering wheel. This cap stretches over the horn cap retainer (part # 329738, sold separately), which then snaps into...
1968-77; GM Cars and Trucks; Black Window Crank Handle with Black Knob; Riveted Design
OER® Authorized reproduction window crank handle customized in black and designed for use on various 1968-77 GM models. This custom handle is manufactured in black die-cast zinc and features a black knob. Add a custom...
Reproduction hazard knob set found on a wide variety of 1967-05 GM models. Each set includes a knob, release collar, tension spring, and screw. Manufactured in black injection molded ABS, the release collar features the word...
1969-2002 GM; Lower Steering Column Bearing Assembly, with or w/o Tilt Steering Wheel; 1" I.D.
This lower steering shaft bearing is designed for use with a variety of 1969-02 General Motor vehicles. Each bearing is manufactured using a sealed ball bearing to prevent steering column play caused when the rubber slip-on...
1966-72 Buick, Chevrolet, Oldsmobile, Pontiac; Bucket Seat Molding End Caps; 12 Piece Set; OER
Reproduction of the original stainless steel end caps for use with various 1966-72 GM model as listed below. These end caps finish off the bucket seat moldings and can add a fresh factory finished appearance to your bucket...
Reproduction lever and knob assembly for 1967-80 Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models as well as a host of additional Chevrolet and Pontiac models in the 1967-77 year range equipped with cruise control switch...
1966-72 Cutlass, Chevelle, El Camino, Skylark, GTO, Monte Carlo; Bucket Seat Track; RH
Reproduction bucket seat adjustment track assembly for 1966-72 GM A-Body models.This track mounts the bucket seat to the floor and allows the front seat to slide forward and backward. Each track is manufactured to replicate...
1930-2010 Snap-On Windlace; Double Lip Style; Dark Saddle; Sold by the Foot; Universal Style
This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...
1930-2010 Snap-On Windlace; Double Lip Style; Ivory White; Sold by the Foot; Universal Style
This OER® Authorized replacement-style snap on double lip style flexible windlace is often used to seal interior door jamb edges to sill plates and much more. Featuring authentic vinyl grain texture, positive gripping...
Reproduction center console shift plate assembly for 1968-72 Chevrolet Chevelle and El Camino, and 1971-72 GMC Sprint models equipped with an automatic transmission. Manufactured to factory specifications, this assembly...
1969-02 Buick, Chevrolet, Pontiac, Oldsmobile; Turn Signal Cancel Cam; with Tilt Steering; OEM Style
OER reproduction turn signal cancel cam to fit a wide variety of GM vehicles equipped with tilt wheel. Features the OEM factory original design which included a serviceable horn contact plunger and spring, unlike other...
Reproduction seat back panels for all 1969-72 GM A, B, and X-Body models with Strato bench or Strato bucket (Non-Reclining) seats. Manufactured in durable plastic and textured with correct madrid grain. These panels are...
Reproduction seat back panels for various 1969-72 GM A, B, and X-Body models with Strato bench or Strato bucket (Non-Reclining) seats. Manufactured in durable plastic and textured with correct madrid grain. These panels are...
Reproduction seat back panels for various 1969-72 GM A, B, and X-Body models with Strato bench or Strato bucket (Non-Reclining) seats. Manufactured in durable plastic and textured with correct madrid grain. These panels are...
Reproduction seat back panels for various 1969-72 GM A, B, and X-Body models with Strato bench or Strato bucket (Non-Reclining) seats. Manufactured in durable plastic and textured with correct madrid grain. These panels are...
Reproduction seat side panels for 1969-71 Chevy II/Nova and other GM A, B, X-Body models with Strato back bucket seats. These ABS reproductions will replace the lower side portion of your front bucket seats. Each panel can be...
Reproduction seat side panels for 1969-71 Chevy II/Nova and other GM A, B, X-Body models with Strato back bucket seats. These ABS reproductions will replace the lower side portion of your front bucket seats. Each panel can be...
Reproduction seat side panels for 1969-71 Chevy II/Nova and other GM A, B, X-Body models with Strato back bucket seats. These ABS reproductions will replace the lower side portion of your front bucket seats. Each panel can be...
Reproduction seat side panels for 1969-71 Chevy II/Nova and other GM A, B, X-Body models with Strato back bucket seats. These ABS reproductions will replace the lower side portion of your front bucket seats. Each panel can be...
Reproduction center console lid for 1970-72 Chevrolet Chevelle, El Camino, 1970-72 Monte Carlo, and 1971-72 GMC Sprint models. Manufactured to factory specifications, this console lid replicates the original design for proper...
Reproduction dash ash tray assembly for 1970-72 Chevelle, Malibu, El Camino, Monte Carlo and Sprint models equiped with the factory Super Sport or (RPO U14 w/round instrumentation) gauge dash panel. Manufactured to factory...
Reproduction rear seat belt anchor bolt for most GM models from 1964-66. This zinc chromate plated bolt has a fine thread design that was correct for for pre-1967 GM vehicles. 7/16"-20 x 1-1/4. Use part# 61216A Seat Belt Bolt...
1971-92 GM; Retainer; For Rochester Style Cigarette Lighter Housing; Various Applications
OER reproduction instrument panel cigarette lighter housing retainer designed for the various GM models listed with a Rochester lighter. This authentic replication housing retainer is manufactured to exact specifications...
1971-72 Chevrolet Chevelle, El Camino, Monte Carlo; Shift Indicator; Column Shift
Column shift indicator for 1971-72 Chevelle, El Camino, Monte Carlo S.S models. This indicator is for T.H. 350 and 400. It include the cable and has white print. Sold individually. {specs} {fitment}
Lower steering column intermediate shaft flange for various 1967-72 GM vehicles including Corvette, Skylark and Monte Carlo models. This reproduction flange connects to the rag joint or steering coupler and was most often...
1970-72 Chevrolet Chevelle, El Camino, Monte Carlo
Reproduction column shift indicator for 1970-72 Chevrolet Chevelle and El Camino with TH350 and TH400 transmission. This indicator is for non-SS cars and includes the cable. Indicator also features green lettering and a...
1970-72 Chevelle, El Camino; 1971-72 Sprint; Center Console Lid Hinge; Chrome
Reproduction center console lid hinge for 1970-72 Chevrolet Chevelle, El Camino, and 1971-72 GMC Sprint models. Manufactured in stamped steel, this hinge is chrome plated as original and built to factory specifications for...
1968-1972 Various GM Vehicle; Inside Rearview Mirror Bracket Cover; Black
Molded black rubber with pebble grain to cover the mirror mount bracket. It's designed to accept the sun visor tips. Sold individually. {specs} {fitment}
1964-72 Various GM Vehicles including Chevelle, GTO, Skylark; Mirror; Sun Visor; Vanity
Reproduction of the sun visor vanity mirror for 1964-1976 Chevrolet Chevelle/Malibu models. Replaces GM part# 480890. Measures 7-1/8 by 3-1/4. Fits most GM vehicle with a push in style mirror with a 4-7/8" hole. Measurements...
Reproduction of the original seat belt bolt designed for use on various 1967-75 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed below. Each seat belt bolt is manufactured to correct GM specifications and features a...
1968-91 GM; Door Lock Knobs; Standard Interior; Smooth Design; Red; Pair
Reproduction of the interior lock knobs originally installed on most standard interiors for 1968-90 Chevrolet, Buick, Oldsmobile, and Pontiac models. Also correct for 1965-86 Chevrolet and GMC C/K truck models, 1987-91 R/V...
1967-94 Buick, Chevrolet, GMC, Olds, Pontiac; Upper, Lower; Tilt Head; Bearing
Steering column upper or lower head bearing. Fits a wide variety of models including 1967-1968 Chevrolet Camaro, Chevelle, El Camino, Malibu, Pontiac Firebird, 1967-68 Chevy, GMC truck tilt head lower bearing. Also fits...