1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Correct reproduction of the original fuel tank designed for with 1971-1972 Chevrolet Nova, Pontiac Ventura models without EEC (evaporative emissions control vapor recovery system). This reproduction fuel tank is manufactured...
1967-72 Camaro, Nova, Firebird; Fuel Tank Sending Unit; 3/8"; with 1/4" Vent
Reproduction of the original fuel tank sending unit designed for use with 1967-68 Chevrolet Camaro and Firebird models with 3/8" line and 1/4" vent. After years of use, your fuel sending unit can stop working properly. When...
1967-69 Camaro, Firebird, 1967-72 Nova; Carburetor to Accelerator Cable; 6 Cylinder; OER
Reproduction accelerator cable for 1967 Camaro, Firebird (6 and 8 cyl), 1968-69 Camaro, Firebird (6 cyl), 1968-72 Nova (6 cyl) models. A faulty cable can lead to problems associated with acceleration and become a safety...
Reproduction of the original style fuel tank designed for use with various 1967-72 Chevrolet and GMC 1/2 ton pickup truck models equipped with EEC (evaporative emissions controls) system. This fuel tank is manufactured in...
1970-1973 Camaro, Firebird; Ni-Terne Coated Fuel Tank; with EEC; 18 Gallon; With Vent Pipes
Reproduction Ni-Terne fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emission control). This OE-quality fuel tank is manufactured in stamped steel to factory specifications featuring a heavy Ni-terne...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1967-72 Chevrolet, GMC Truck; Fuel Tank Relocate Kit; 20 Gallon; Side Fill
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail. This conversion will help eliminate gas fumes in the cab while adding the benefit of more interior storage space. Each conversion set...
1963-72 Chevy, GMC Pickup Truck; Fuel Tank Relocate Kit; 20-Gallon Capacity; Side Fill Style
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail to eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 20 gallon side fill fuel tank, fuel tank...
1971-72 Nova, Ventura; NiTerne Coated Fuel Tank; with EEC; 18 Gallon
Reproduction of the original fuel tank designed for use with 1971-72 Chevrolet Nova models with Evaporative Emission Control (EEC). Each fuel tank is manufactured in quality stamped steel and features a NiTerne coating for...
1969-72 Blazer, Jimmy, Suburban; Fuel Tank; 20 Gallon; Zinc Coated
Reproduction fuel tank for 1969-72 Chevrolet Blazer and 1970-72 GMC Jimmy models. This tank is direct-fit for Blazer and Jimmy without any modifications required. Will also fit Suburban with slight modification of filler...
1970-73 Camaro, Firebird; Fuel Tank; with EEC; Zinc Coated; 18 Gallon Tank; With Vent Pipes
Reproduction 18 gallon fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emission control). Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating...
1971-72 Nova, Ventura; Fuel Tank; with EEC; Zinc Coated; 18 Gallon Tank
Reproduction of the original fuel tank designed for use with 1971-72 Chevrolet Nova, Pontiac Ventura models with Evaporative Emission Control (EEC). Each fuel tank is manufactured in quality stamped steel and features a zinc...
Reproduction carburetor to accelerator lever cable for 1970 Camaro (4 bbl), 1971-73 Camaro with (350 4 bbl.), and 1970-72 Chevelle (with 396, 454). Each cable is manufactured to correct length and specifications. Replaces...
1971-72 Chevrolet Chevelle; 20 Gallon Fuel Tank; w/ Filler Neck; w/ Three Vent Pipes
Reproduction fuel tank for 1971-72 Chevrolet Chevelle models. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion prevention. This is a 20 gallon fuel tank that...
1971-72 Nova, Ventura; Zinc Coated Fuel Tank; without EEC; 18 Gallon; GM46B
Reproduction of the original fuel tank designed for use with 1971-72 Nova, and Ventura models without Evaporative Emission Control (EEC). Each fuel tank is manufactured in quality stamped steel and features a zinc coating for...
1972 Chevrolet, GMC Pickup; Fuel Tank Sending Unit; with Auto Trans; 3/8"; w/Gasket & Lock Ring
Reproduction of the original fuel tank sending unit designed for use with 1972 Chevrolet and GMC pickup truck models with 3/8" line. After years of use, your fuel sending unit can wear out. When that happens, it can send...
1969-72 GM Truck; Fuel Tank Neck Grommet
OER reproduction gas tank filler grommet for various GM models including 1971-72 Chevrolt and GMC pickups and 1969-72 Blazer/Jimmy models. Each filler neck grommet is manufactured in molded rubber to replicate the original....
Reproduction fuel tank for 1970-1972 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a 18...
Reproduction fuel tank for 1970-1974 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes filler...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1970-73 Camaro, Firebird; Fuel Tank Sending Unit; 3/8" Line with 1/4" Return Line
After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how much fuel...
1968-72 Chevy II Nova, Ventura; ; Fuel Tank Mounting Straps; EDP Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1968-72 Chevrolet Chevy II, Nova, and Pontiac Ventura models. Replace your original worn out gas tank straps with high quality reproductions....
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1968-72 Camaro, Impala, Nova; Holley Throttle Cable Bracket
Reproduction of the original style Holley throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1968-72 Chevrolet Chevelle, Malibu; Big Block; Quadrajet; Accelerator/Throttle Cable
Replacement accelerator/throttle cable for 1968-72 Chevrolet Chevelle and Malibu models. This cable is 23.5 inches long and is for big block applications. GM#'s 396454, 3972679. {specs} {fitment}
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
1970-72 Chevrolet Nova; Accelerator; Throttle; Cable
Replacement accelerator cable for 1970-72 Chevorlet Nova models with Holley or Quadrajet 4BBL carburetor. Extends from the carburetor to the accelerator pedal lever. Sold individually. GM# 3998632. {specs} {fitment}
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Reproduction fuel tank mounting straps for 1967-72 Chevrolet and GMC Pickup truck, Blazer, Jimmy, and Suburban models. Each strap is manufactured in quality stamped steel. Comes with a black EDP Coating for rust and corrosion...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1968-74 Chevrolet Corvette; Fuel Tank Mounting Straps; EDP Coated; Galvanized Steel; Pair
Reproduction fuel tank mounting straps for 1968-1974 Chevrolet Corvette models. Each strap is manufactured in stamped steel to original to factory specifications. Produced in zinc plated steel with a black EDP coating for...
1968-81 Corvette; Fuel Pump Return Hose
Replacement return hose for 1968-81 Corvette models. This 1/4" hose goes between the fuel pump and the tank.
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1967-72 Camaro, Firbeird, Nova; Fuel Tank Strap Mounting Bolt Kit ; 10 Piece Set ; Various Models
Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...
1967-69 Camaro, Firebird,1968-72 Nova; Fuel Tank Sending Unit; with 3/8" Single Line
Reproduction fuel tank sending unit for 1967-69 Camaro and Firebird models, and 1968-72 Nova models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your...
1971-1972 Chevrolet Nova;, Pontiac Ventura; Gas Tank; with EEC; Stainless Steel; 18 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1971-1972 Chevrolet Nova, Pontiac Ventura models with EEC (evaporative emissions control vapor recovery system). This reproduction fuel tank is manufactured in...
Correct reproduction fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emissions control vapor recovery system). This reproduction fuel tank is manufactured in stainless steel replicating the original GM...
Reproduction of the original fuel tank designed for use with 1967-1972 Chevrolet and GMC pickup truck models. This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne coating for superior rust...
Reproduction of the original fuel tank designed for use with 1970-1972 Chevrolet and GMC pickup truck models with EEC (evaporative emission control). This reproduction fuel tank is manufactured in quality stamped steel...
Reproduction of the original style fuel tank designed for use with various 1967-72 Chevrolet and GMC 1/2 ton pickup truck models not equipped with EEC (evaporative emissions controls) system. This fuel tank is manufactured in...
1971-72 Chevrolet Nova/Pontiac Ventura; Without EEC; Fuel Tank; 18 Gallon; Niterne Steel; GM46B
Reproduction fuel tank for 1971-72 Nova models with out E.E.C. (evaporative emissions controls). This fuel tank has a capacity of 18 gallons. Note: Use gas cap Part Number ST10807. Note: Shipped double oversize. Chevrolet...
Reproduction of the original style fuel tank designed for use with 1970-74 Impala, Bel Air, Biscayne, Catalina, Bonneville and GM full size station wagon models. This fuel tank is made of zinc-coated steel and has a capacity...
1967-72 Chevrolet/GMC Truck; Fuel Tank Relocate Kit; With Top Fill; 17-Gallon Capacity
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail to eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 17 gallon top fill fuel tank, fuel tank...
1963-72 Chevy, GMC Pickup Truck; Fuel Tank Relocate Kit; 17-Gallon Capacity; Top Fill Style
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail to eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 17 gallon top fill fuel tank, fuel tank...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1970-73 Camaro, Firebird; Fuel Tank Sending Unit; Single Line; 3/8"; 6 cyl, 307ci, 350ci
Reproduction of the original fuel tank sending unit designed for use with 1970-73 Camaro and Firebird models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can...
1971-72 El Camino, Sprint; 20 Gallon Fuel Tank; w/ Filler Neck; w/ Vent Pipes
Reproduction fuel tank for 1971-72 Chevrolet El Camino and GMC Sprint models. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion prevention. This is a 20...
1965-74 Holley; Carburetor Heat Shield; 4 Barrel with 396,454 Engine
OER® reproduction carburetor heat shield for all GM models with a Holley 4 bbl carburetor. This heat shield will help cool the intake charge for better performance. Original for 1970 396ci & 454ci with Special...
Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...