Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1967-81 Camaro, Firebird, Nova; Subframe Body Mount Hardware Set; Grade 5; Various GM Models
Subframe hardware kit designed for use on various 1967-81 Camaro, Firebird, and 1968-74 Nova, Omega, Apollo, and Ventura models as listed below. Each kit contains all the correct bolts, washers and nuts used to mount the...
Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate
Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...
1955-74 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...
1/2"-13 Prevailing Torque Lock Nut; Cadmium Plated
1/2"-13 Prevailing Torque Lock Nut; Grade 8; Cadmuim Plated
Bolt; 1/2"-13 x 5" Lg Hex Head Cap Screw; Grade 8
1/2"-13 x 5" Hex Head Cap Screw; Grade 8
1953-74 GM; J-Type Clip Nut; Fits 5/16-18 bolts, Black Phosphate Coated; Each
OER® Authorized reproduction J-nut that was used for the installation of various front end components including front fenders, header panels, hood latches, radiator supports, battery trays and more. Measures 5/16-18...
1967-69 F-Body & 1968-74 X-Body Subframe Body Plate Set
A complete kit of subframe mounting plates will take care of the rotted out crucial areas where the subframe bushings mount. After years of abuse, the plates may become damaged beyond repair. You certainly don't want to...
1947-53 Long Bed, 1955-72 Short Bed Chevrolet/GMC Truck 8 Piece Bed Mounting Pad Set
Keep your truck bed in proper alignment by replacing the old, worn out mounting pads with OER's® new reproduction pads. Each set contains the correct number of pads necessary to replace the entire set. Application Notes:...
1967-74 Camaro, Firebird, Nova, GM X Body; Subframe Body Mount Cage Nut; Each
Reproduction subframe cage nut for various 1967-74 GM models. This body mount cage nut is manufactured from stamped steel and used to fasten the subframe to the body. Replaces torn, rusted, or damaged mounting points on GM...
1960-81 GM; Body Mount Shims; 1/8" Thick, 1-1/4" x 1-1/8"; 3/8" Bolt Slot; Zinc Plated; 10 Piece Set
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1961-1981 GM; Body Shims; 15/64"; 10 Piece Set
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1953-74 GM; J-Type Clip Nut; Fits 5/16-18 bolts, Black Phosphate Coated; 10 Piece Set
OER® Authorized reproduction J-nut that was used for the installation of various front end components including front fenders, header panels, hood latches, radiator supports, battery trays and more. Measures 5/16-18...
1959-74 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models from 1959-1974. This bolt features a...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; 10 Piece Set
OER® Authorized reproduction bolt that was used for the installation of various front end components including front fenders, header panels, hood latches, radiator supports, battery trays and more. The OER® Authorized...
Bolt; 1/2"-13 x 3-1/2" Lg Flanged Hex Head Cap Screw; Grade 8; Phosphate
Bolt, 1/2"-13 x 3-1/2" Flanged Hex Head Cap Screw; Grade 8
1/2" SAE Flat Washer; Grade 8 High Strength; bright zinc Specifications: Bolt Size : 1/2" Inner Diameter : 17/32" Outer Diameter : 1-1/16" Thickness : 0.097-0.121" Finish : Zinc & Gold Dichromate Grade : 8 Material : 1035...
1969-81 Camaro, Firebird, 1970-74 Nova; Body Mount Cushion; Lower; # 2, # 3 Bolt; Each
Reproduction of the original GM sub frame body mount cushion for 1969-81 Camaro/Firebird and 1970-74 Nova/GM X-Body models. Each body mount is produced using correct compression molded S.B.R. that replicates the original in...
1970-72 Camaro, Nova; Body Mount Bushing Kit; Subframe and Radiator Support; 12 Piece Set
Reproduction of the original style body mount and radiator support bushings designed for use with 1970-72 Camaro and Nova models. Replacing the original body mount bushings with OER® rubber reproductions is a sure fire...
1968-72 Chevrolet El Camino, Chevelle; 1968-72 Pontiac GTO, LeMans; Radiator Support Bushing Set
Reproduction of the original style radiator support bushing and hardware designed for use with 1968-72 El Camino, GTO, and Lemans models as listed. Each set contains correct bushings with steel sleeve inserts and hardware...
Reproduction of the original GM sub frame body mount for 1967-72 Camaro, 1967-72 Firebird and 1968-72 Nova models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the...
Service replacement cab mounting bushings and hardware components for 1967-72 Chevrolet and GMC 1/2 ton 2wd trucks. This set of subframe mount bushings includes all components needed to replace the old or worn out originals....
1967-72 Chevrolet K10, C/K20, GMC K15, C/K25; Cab Mounting Bushing and Hardware Set; Reproduction
Reproduction of the original cab mount set for 1967-72 Chevrolet and GMC 3/4 ton, 2-wheel drive and all 4-wheel drive standard cab pickup truck models. Each 26-piece kit includes factory style cab mounting bushings and...
1967-72 Chevrolet, GMC 1/2 Ton, 2wd; Cab Mounting Bushing and Hardware Set; Reproduction
Reproduction of the original cab mount set for 1967-72 Chevrolet and GMC 1/2 ton, 2-wheel drive standard cab pickup truck models. Each 28-piece kit includes factory style cab mounting bushings and hardware to fit 1/2 ton 2wd...
Reproduction of the original GM sub frame body mount cushion for 1967-81 Chevrolet Camaro, 1967-69 Pontiac Firebird, and 1968-74 Chevrolet Nova models. Designed for the #1 position (radiator support, upper cushion), this...
Reproduction of the original GM sub frame body mount for 1967-81 Chevrolet Camaro, 1967-69 Pontiac Firebird, and 1968-74 Chevrolet Nova models. Designed for the #1 position (radiator support, lower bushing), this mount is...
Reproduction of the original GM sub frame body mount for 1967-72 Camaro, 1967-72 Firebird and 1968-72 Nova models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the...