This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1970-72 Pontiac GTO, LeMans, Tempest, Buick Skylark, Oldsmobile Cutlass and 1970-71 442 models with a 4-speed Muncie manual transmission....
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
Turbo 350; Transmission Dipstick And Tube; 27" Long
This chrome plated dipstick with tube for the GM turbo hydromatic 350 transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper...
Universal Frame Mount Manual Brake Pedal Bracket Assembly; GM Booster Style; Under Floor Mount
Universal frame mount brake pedal assembly for GM style brake booster with 4 bolt 3-3/8? center. For automatic transmission equipped, left hand drive hot rod and truck models. Great for under the floor, frame mount...
1969-90 GM; Speedometer Cable Retainer Clip; Various Models
Reproduction of the original speedometer cable retainer clip designed for use with various for 1969-90 General Motors vehicles. This retainer clip is manufactured in stamped steel replicating the original design. Retains the...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...
Reproduction speedometer cable and casing for 1958-68 GM models with screw-on style cable at both ends. Thread sizes are 7/8-18 female on one end and 5/8-18 female on the other. Each cable is manufactured to exact OE...
Reproduction speedometer cable for various 1958-68 GM applications with automatic transmission including Impala, GTO, Camaro, Skylark. This cable is a screw on type at both ends and is 57" long. If the speedo isnt working or...
1967-79 GM; Transmission Dipstick; TH350 Auto Trans; 27-1/8" Long; Various Models
Reproduction of the original turbo 350 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with...
1970-77 Buick Skylark, 1970-72 GS 455, GS; U-Shaped Shifter Insert; Chrome
Reproduction chrome plastic insert for console for 1970-77 Buick Skylark 1970-72 GS 455 and GS models. This is the U-shaped insert that snaps into the top of the shifter handle and runs down the side. {specs} {fitment}
1968-72 Buick Skylark, 1969-70 Riviera; Shifter Cable Bracket; TH-400
Transmission shifter cable bracket for 1968-72 Buick Skylark, 1968-69 GS 400, 1970-72 GS 455 and GS models. This is the bracket that holds the transmission shifter cable at the transmission. This bracket has all the correct...
1970-77 Buick Skylark, 1970-72 GS 455, GS; Chrome Shifter; Release Bar
Reproduction chrome release bar on console shifter for 1970-77 Buick Skylark 1970-72 GS 455 and GS models. This is the you pull up to release the shifter out of park. Replace the old faded or cracked pull up bar with this new...
Quality reproduction of the 1967-72 Hurst Competition shifter for various 1967-72 Buick Skylark, Gran Sport, GS 350 and GS 400 models. The shifter is designed for vehicles with or without a console and either bucket or bench...
Replacement transmission crossmember for automatic or manual transmissions for various 1968-72 GM applications including Monte Carlo, Skylark, and GTO convertible models. This style of crossmember uses rubber pads that bolts...
GM TH350/400 Transmission Dipstick; Flexible Firewall Mount; 27" Long
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
1967-81 Firebird, Trans Am; Clutch Fork; Various GM Models
Reproduction of the original clutch fork designed for use with various 1964-74 Buick, Oldsmobile, and 1964-81 Pontiac and Firebird V8 models. This clutch fork is manufactured in the correct configuration and features the...
Speedometer Cable and Casing; For Clip Retained on Speedometer Side; Push-On Style; 46" Long
Reproduction speedometer cable and casing for 1969-later GM models with clip-on style cable end at the speedometer end. Each cable is manufactured to exact OE specifications. Features correct fittings with clip on style...
1969-72 Cutlass, Skylark, GTO, GS; Hurst Shifter 3 Piece Tab Set
Reproduction Hurst shifter tab set for 1969-72 Pontiac GTO, Oldsmobile Cutlass, 442, W30, W31, Buick Skylark models with a Hurst shiter. These shifter tabs are die stamped they fit very and are a press to fit installation....
New automatic column replacement shift lever knob. It is chrome fluted with a black cap for multiple 1971-76 buick models including Skylark, LeSabre and Riviera. This knob is made from quality materials to ensure reliable...
1964-79 GM; Transmission Dipstick; TH400 Auto Trans; 24-1/8" Long; Various Models
Reproduction of the original TH400 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with obsessive...
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...
Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set
Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...
Reproduction clutch & brake pedal assembly for various GM applications including Pontiac GTO, Oldsmobile 442, and Buick Skylark. These perfectly constructed brake and clutch pedal assemblies are a bolt in style manufactured...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
Reproduction Steering Lock Out Swivel Insulator Bushing for 1969-72 GM A-Body, F-Body, and X-Body vehicles. Keep your steering lock-out system tight and rattle-free. Don't let a worn or missing insulator ruin the precise feel...
Restore smooth, factory-correct steering lock-out operation in your '69?'72 GM A, F, and X-body and bring back the crisp, positive action of your classic GM column with this precision-formed Steering Lock-Out Swivel Spring....
1962-83 GM Clutch Fork Boot; 3-1/2" x 2-5/8"
OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...
1953-2010 GM; Rear Axle/Transmission Ventilator; for 3/8" Hole
OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...