1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1969 Camaro, Firebird, 1969-72 Nova Subframe Assembly; with TH400 Crossmember; OEM Style
Reproduction of the original complete sunframe assembly designed for use with 1969 Camaro, Firebird, and 1969-72 Nova models with TH 400 crossmembers. Why waste money trying to repair a damaged subframe that may be...
Leaf Spring U-Bolts; 3-1/4" Wide X 6-3/4" Long; Fits 3-1/4" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body
Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style
Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Inner and Outer Tie Rod Ends
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1970-81 Camaro, Firebird, 1970-79 Chevy II, Nova and X-Body; Rear Spring Shackle Bushing Set
Reproduction rear leaf spring shackle for 1970-79 Chevy II/Nova, GM X-Body, and 1970-81 Camaro, Firebird models. Each shackle eplaces the old or worn out original hardware and bushings with a quality reproduction. Includes...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-69 Camaro, Firebird, and 1968-79 Nova, 1971-77 Ventura, 1973-80 Omega, 1973-75 Apollo, 1975-80 Skylark models with multi-leaf springs. This essential bolt was...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1970-81 Rear Sway Bar Bracket ; 1970-81 F-Body, 1970-79 X-Body ; Various Models
This OER® reproduction of the original rear sway bar bracket manufactured from high grade stamped steel to original specifications. Sway bar brackets hold the sway bar bushings to the frame and secures the rear sway bar...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; RH
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova and X body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set
This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...
Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle. Has 2" Spacer {fitment}
1967-81 Rear Spring Eye Bracket Bolt Set (6 piece)
Quality reproduction of the original rear spring eye bracket bolt designed to mount the leaf spring front eye bracket. Each bolt is case hardened for durability and long lasting performance. 6 bolts included in each set....
1969 Camaro, Firebird, 1969-72 Nova; Subframe Assembly; OEM Style; w/oTrans Crossmember
Why waste money trying to repair a damaged subframe that may be compromised internally when you can replace it with this high-quality Restorer's Choice™ reproduction. This reproduction subframe assembly is designed and...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
1967-69 Camaro Z/28, Firebird 400, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-69 Camaro Z28 (302), 1968-81 Firebird 400 and performance models, Chevy II Nova and GM X-body models with 4 leaf rear springs. Each leaf spring...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1967-69 Camaro, Firebird, Nova; Front Sway Bar Set; 1-1/8" Bar
Replacement sway bar designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the above without affecting your ride quality. Kit includes:...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Sway Bar; OE Design ; 7/8"; Silver Zinc Plating
Reproduction of the original design rear sway bar set for various 1968-74 GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II Nova, and 1973-74 GM X-body models. Features a gold zinc plated finish similar to the...
Rear Leaf Spring U-Bolts; 3-1/2" Wide X 7-1/4" Long; Fits 3-1/2" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1967-74 Camaro, Firebird, Nova, Omega, Ventura, Apollo; Front End Bushing Kit
The control arm bushings are an essential ingredient in maintaining control of the vehicle. Worn-out bushings are likely to effect the performance and handling of your classic. Replacing the old bushings can not only increase...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; LH
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova and X body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-74 Camaro, Firebird, Nova; Front Sway Bar Sleeve Brackets; Pair
Reproduction of the correct front sway bar sleeve brackets designed for use with various 1967-74 Chevrolet, Buick, Oldsmobile, and Pontiac models. These sleeve brackets mount on the front sway bar next to the sway bar bracket...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4? to 4? inclusive. These heat treated washers are for general purpose and structural use. For use...
1967-81 Rear Spring Eye Bracket Nut
Quality OER® reproduction of the original rear spring eye bracket nut used to mount the leaf spring front eye bracket. Sold individually. 6 required per vehicle. Applications 1967-81 Camaro models 1967-81 Fir ebird models...
1968-79 Rear Leaf Spring Pad ; Multi Leaf ; Upper and Lower ; Camaro, Firebird, Nova, X Body
Reproduction of the original multi leaf, upper and lower rear leaf spring pad designed for use on various GM models. Each pad is manufactured to OE specifications in EPDM rubber compound. Always replace the rear leaf spring...
1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each
Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Leaf Spring Installation Kit; Multi Leaf; with Sway Bar
Reproduction of the original and complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro, Firebird, and 1968-74 Nova models....
1967-69 Camaro, Firebird, 1962-74 Chevy II, Nova; Rear Leaf Spring Pad; Upper; with Mono Leaf
Reproduction of the original mono leaf upper rear spring pad designed for use on various GM models. Each pad is manufactured to OE specifications using quality EPDM rubber compound for long lasting dependability. Always...
1964-75 Camaro, Chevelle, Firebird, GTO; Upper A-Arm Bolt and Nut Set; 8 Piece Set
Reproduction of the upper control arm cross shaft bolt set used to retain the shaft to the frame mounting ears on various GM vehicles. The grade 8 ratings nuts & bolts are made from high strength steel which as been formed...
1964-74 GM; 2" Drop Spindles; with Disc Brakes; RH and LH; Pair
Reproduction of the original style 2" drop spindles for various 1964-72 Buick, Chevrolet, Pontiac, and Oldsmobile A, F, and X body models. These 2" drop spindles will replace OE single piston disc brake spindles. The stock...
1955-72 GM; Lower Control Arm Bumpers; Polyurethane; Black; Pair
Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...
1955-74 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bushing; Each; Various Models
1958-1970 Chevrolet Biscayne 1958-1970 Chevrolet Bel Air 1966-1970 Chevrolet Caprice 1970-1972 Chevrolet Monte Carlo 1968-1968 Chevrolet Chevy II 1968-1974 Chevrolet Nova 1955-1957 Chevrolet Bel Air 1955-1957 Chevrolet One...
1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each
Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...
1968-72 Lower Control Arm Bumper ; Each
Reproduction of the original lower control arm bumper designed for use on various GM vehicles including 1968-69 Camaro and Firebird models. Each control arm bumper is manufactured in hard rubber featuring correct mounting...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Leaf Spring Installation Kit; Multi-Leaf; w/o Sway Bar
OER® offers this complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring...
1969 Camaro, Firebird; Rear Sway Bar Links; Pair
Reproduction rear sway bar links for 1969 Camaro and Firebird and 1968-74 Chevy II/Nova models. These links attach to the upper rear frame rails & sway bar. Links are for factory sway bars and include body-end bushings....
1967-74 Camaro, Firebird, Nova; Rear Leaf Spring Front Eye Bolts and Nuts ; Pair
Original style reproduction of the original bolts and nuts designed for use with 1967-74 Camaro, Firebird, 1968-74 Nova, 1971-74 Ventura, 1973-74 Apollo, 1973-74 Omega models. These bolts are manufactured to factory...
1970-81 Camaro/Firebird, 1970-79 Nova / X-Body Rear Spring Shackle Bushing Set
Replace your cracked, shrunken or worn out shackle bushings and bring your rear suspension back to original factory ride specifications. Set includes 8 bushings. Note: No further discounts apply.
Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head
3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
1967-69 Camaro, Firebird, 1968-79 Nova; Rear Leaf Spring Installation Kit; Mono Leaf
OER® offers this complete rear leaf spring installation kit designed for use on various 1967-79 GM vehicles equipped with mono-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...